Tumo-Int 3000W 5 Blades Wind Turbine User Manual

Tumo-Int 3000 Watts 5 Blades Wind Turbine

Generator Kit (HYE MODEL)

USER’S MANUAL

Model

Installation

Debug and Test

Maintenance

Trouble Shooting

Packing, Transportation and Storage

Add: B220, Wansheng Square, Chengjiao, Conghua,Guangzhou, China. 510900

Tel: [phone] Fax: [phone]

Mobile: [phone]

Email: [e-mail]

Website: www.tumo-int.com

MADE IN CHINA

Tumo Int Corp. Ltd All Rights Reserved

1

THANK YOU FOR YOUR PURCHASE OF TUMO-INT WIND TURBINE GENERATOR
KIT. BEFORE ASSEMBLY, PLEASE CAREFULLY READ THE OWNER'S MANUAL
FOR SAFETY USE AND OUTSTANDING PERFORMANCE. ENJOY THE
CONVENIENCE WHICH TUMO-INT WIND TURBINE GENERATOR KIT BRINGS
YOU!

THE OWNER'S MANUAL ISSUED ON JULY 2011. PLEASE UNDERSTAND IN CASE
OF ANY PRODUCT IMPROVEMENT OCCUR, IT WILL BE UPDATED IN APPENDIX.

2

Preface

Dear Tumo-Int wind turbine owner:

Thank you for your purchase of Tumo-Int small wind turbine! You have purchased the
most advanced battery charging wind turbine in the world! We believe you will find it
easy to install your Tumo-Int wind turbine, moreover, we are confident you will
experience years of dependable service from it.

Please make sure you’ve carefully read the manual before any assembly, installation or
operation of your Tumo-Int wind turbine, it will help you to better improve Tumo-Int wind
turbine using experience. If failure of following this Tumo-Int wind turbine manual’s
instructions and requirements, Tumo Int Corp. Ltd will not be liable for any property loss.

This manual has been strictly reviewed to ensure you properly install and use Tumo-Int
wind turbine.

Tumo Int Corp. Ltd is committed to continuously improve Tumo-Int wind turbine features
and service quality, to reserves the right to change any products and any other
information in the manual without prior notice.

This manual can help you to better understand and properly use Tumo-Int small wind
turbine, however, the content of hardware configuration is not included in the manual.
Regarding to whole system configuration, please refer to the relevant contract (if any) or
distributor. Pictures in the manual are for reference only, if there is discrepancy between
picture and product, please prevail in kind.

If you find actual situation of Tumo-Int wind turbine is inconsistent with the description in
the manual, or you would like to know the latest information, or you have any questions
or comments, please call during working hours (Monday- Saturday 9:00a.m. to 5:00 p.m.
Beijing Standard Time). Our number is 0086-13902383429. Or visit our shop in
Amazon.com to leave messages.

Sincerely,
Tumo Int Corp. Ltd

3

Safety Instructions

1. For your safety, please read these instructions carefully before installation or
operation.

2. Important: Please comply with the following instructions before using your Tumo-Int
wind turbine.

2.1 please read these instructions carefully before use.

2.2 Safety instructions before installation：

2.2.1 Install Tumo-Int wind turbine on sunny day.

2.2.2 Do not install Tumo-Int wind turbine during dusty day with more than 10 m/s wind
speed.

2.2.3 Wear wet gloves or clothes are prohibited.

2.2.4 Install and maintain Tumo-Int wind turbine under professionals guidance, or
contact distributor.

2.2.5 Do not use too thin or poor quality cables, use original cables as far as possible in
order to avoid leakage or fires and line losses.

2.2.6 Non-professionals do not open controller and inverter casing.

2.2.7 Install grounding device in accordance with application standard and installation
instructions.

2.2.8 Battery may be sparks flying while wiring, make sure that no inflammables the
work environment nearby.

2.2.9 Do not place the controller, inverter and battery in damp, rain, vibration, corrosion
and strong electromagnetic interference environment, the places in direct sunlight, near
heater or other heat sources are not allowed, either.

2.3 Selection and installation requirements of controller, battery:

2.3.1 Controller specification should be matched with voltage, power and current of the
battery, solar panel, wind turbine and load.

2.3.2 Controller and battery should be put in a power housing cabinet, and the housing
is located in ventilated place where people are not easy to touch.

2.3.3 Controller and battery must be installed in accordance with corresponding electric
equipment installation standard and operation regulations of manufacturer.

2.3.4 Power housing cabinet is placing near people living room, adoption of sealed
battery is far more safe.

2.3.5 Negative pole of battery should be in good grounding.

2.4 Wiring requirements:

2.4.1 Connections between components in the system should be fixed and reliable, plug
and socket are not allowed for the connection.

2.4.2 The Wind system’s power output terminal must be firmly fixed with consumption
load terminal, or the wind system’s power output terminal adopted of using power
socket.

2.4.3 Do not use two-way plug for the connection of wind system’s output terminal with
consumption load terminal.

4

2.4.4 Any cables or wires of the system, which might be damaged due to outdoor
exposure, should be coated with conduit for protection.

3. Precautions:
Operators must clearly know safety measurement. Safety relies on our joint efforts.

3.1 All operations must:
a. Follow instructions in the manual.
b. Operated by specialized workers.
c. Accident or injury or possible severe damage to equipment may result if false

operation.

3.2 Operation workers must master:
a. Equipment recognition.
b. Correct equipment operation ability.

c. Relevant safety knowledge.

5

Contents

1 WIND TURBINE INTRODUCTION……………………………………

2 SITING…………………………………………………………………..…

3 APPLICATION RANGE…………………………………………………..

4 MODELS, SELECTION, TECHNICAL SPECIFICATIONS………………

5 WIND TURBINE ASSEMBLY………………………………………………..

6 SYSTEM CONFIGURATIONS……………………………………………….

7 DEBUG AND TEST………………………………………………………….

8 MAINTENANCE…………………………………………………………….

9 TROUBLE SHOOTING……………………………………………………

10 PACKING, TRANSPORTATION AND STORAGE…………………………

APPENDIX I: THE WIND SCALE LIST

6

BEFORE INSTALLATION, PLEASE ENSURE ALL COMPONENTS IN CARTON ARE

FULLY MATCHED THE PACKING LIST, IF IN LACK OF ANY PARTS, PLEASE

CONTACT US IMMEDIATELY.

One ---- Wind Turbine Introduction

1.1 Blades: Patented blades with efficient twisted aerodynamic design are made with

Nylon and reinforced fiber glass materials by precision injection molding technology.
The blades are of exceptional consistency and aerodynamic outline with a mass
distribution that ensures the rotor operates with minimum noise and minimal vibration.
Tumo-Int wind turbine has very low start-up/cut-in wind speed and a high coefficient of
productivity, which is specially designed to prevent the blades from feathering post stall.

1.2 Generator: Made from high-quality rare earth permanent magnets material. The

wind turbine is of small size, light weight and high-efficiency power generation
characteristics. Unique electromagnetic design technique has endowed the wind
turbines in an excellent start performance, which effectively ensures Tumo-Int wind
turbine can be started up in a gentle breeze.

1.3 Body: Tumo-Int wind turbine, adopts high-quality aluminum alloy material and

stainless steel accessories, which is light weight. It has such high reliability that can be
applicable to various working conditions, such as severe climate, an ambient
temperature from -30 to 60 , high humidity, sand and salt ℃ ℃ corrosive environment as
well.

Tumo-Int wind turbine is elegant and easy to install, which makes you enjoy clean
energy in all-weather circumstances, as well as a joyful landscape.

Two ---- Siting

Small changes in wind speed and wind direction can have a dramatic effect on
power production. In general, the higher the tower, the greater the wind speed
and ultimately power production. Therefore, the siting of your wind turbine should
be carefully considered. Each installation is different and is often a compromise
among tower height, distance from the battery bank, local zoning requirements
and obstacles such as buildings and trees.

Specific requirements about installation and sitting of wind turbine are as follows:

2.1 The minimum recommended tower height is 8m on open ground or 5m above

nearby obstructions (Fig. 1), there are no obstacles within 100 meters as far as
possible;