Tumbleweed 000014 Assembly Instructions Manual

Assembly Instructions

140L Compost Tumbler

Tumbleweed’s 140L Compost Tumbler is ideal for small urban courtyards
and verandahs. Super compact and easy to use, just load the barrel then
turn it every few days, leaving you with fantastic mulch in just four weeks
or rich compost in six.

www.tumbleweed.com.au

Assembly Instructions

Assembling your 140L Compost Tumbler

1. Lay one of the 2 circular panels (4) on the ground so that the star pattern of slots is

visible and the RELN GARDEN logo is facing downwards (Figure 1).

2. Vertically mount a panel (3) (panel without a metal part) on the circular panel (4) by

pushing it into the circular groove in position A (Figure 2).

3. Vertically mount the second panel (3) in position B by pushing it into the circular

groove (Figure 3).

4. Vertically mount the locking panel (2) (panel with the lock) in position C by pushing it

into the circular groove (Figure 4).

5. Place the 2nd circular panel (4) (RELN GARDEN logo facing upwards) on top of the

3 rectangular panels already mounted by slotting their plastic connecting elements

into the holes in the circular panel. The open groove of the circular panel must

ide with the side without a panel.

coinc

6. Once the circular panel is in the correct position, insert 28 mm screws (13) with

washers (14) in each of the 6 positions shown (Figure S). Screw down tightly. The

hole next to the opening on the panel without a metal part must remain empty of

screws.

7. Carefully turn the tumbler over and insert 6 screws with washers into the positions

opposite the 6 screws already in place. The hole next to the opening on the panel

without a metal part must remain empty of screws.

www.tumbleweed.com.au