Tuffy Security 130 User Manual
INSTALLATION INSTRUCTIONS
Under Seat Drawer Part #021, #130
Please read and fill out the enclosed warranty registration card to activate your warranty.
The mounting instructions for this drawer are enclosed with the mounting kit
(sold separately).
*****NOTICE*****
THERE IS A PROTECTIVE METAL SHIPPING BRACKET WHICH WILL HAVE TO BE REMOVED
AND DISCARDED. REMOVE IT BY UNFASTENING THE (4) SCREWS HOLDING IT TO THE
DRAWER AND ENCLOSURE.
ALSO, THE HANDLE IS PACKAGED INSIDE THE DRAWER FOR SHIPPING PURPOSES MAKING
THE DRAWER DIFFICULT TO OPEN THE FIRST TIME. TO OPEN DRAWER THE FIRST TIME DO
THE FOLLOWING:
• UNLOCK THE DRAWER BY TURNING THE KEY 180 DEGREES CLOCKWISE TO THE
UNLOCKED POSITION
• PUSH LOCK BUTTON ALL THE WAY IN WHILE SLIDING DRAWER OUT FROM
ENCLOSURE
WE RECOMMEND PLACING HAND UNDER LEFT SIDE OF DRAWER AND PUSHING UP WHILE
PULLING OUT WITH PUSH BUTTON LOCK DEPRESSED
ATTENTION:
FREQUENT LUBRICATION IS NECESSARY ON THE LOCKING SYSTEM
The pushbutton lock contains an “O” ring seal to protect the interior from dust and water. If this mechanism is not
lubricated regularly it will become difficult to operate and it may not return to its home position preventing the key from
operating the lock. If this happens simply pull up on the pushbutton to manually bring it back to its home position.
Lubricate the pushbutton with a light lubricant such as silicone spray. The pushbutton may have to be periodically
disassembled and cleaned.
Call (970) 564-1762 for Technical Support
Page 1 of 1 - 1/28/2008 – Rev122006
Loading...