Page 1
OWNER’S MANUAL
TUFFSTUFF FITNESS INTERNATIONAL
OWNER’S MANUAL
Maintenance & Assembly Instructions
IMPORTANT: KEEP THIS MANUAL FOR FUTURE REFERENCE
NOTICE
It is the Purchaser’s/Owner’s obligation:
1. To disclose and post all Rules & Regulations, Danger, Warning and Caution
labels a xed on the machine to their customers/users.
2. Equipment to be installed by TFI Authorized Dealer or a service
company approved by TFI.
3. Provide trained personnel, supervision and correct usage of the equipment.
4. Provide scheduled inspection, maintenance & repairs and must be performed
by TFI Authorized Dealer or a service company approved by TFI.
5. Must use only genuine TFI replacement parts.
6. Machine must be anchored to a solid and level surface.
CPR-265
Power Cage
CPR-265_Rev0
Revision Date 6-16-2014
Page 2
Table of Contents
Overhead Speci cations .................................................................................Page 3
Danger, Warning, & Caution Labels Information ...............................Page 4-7
Anchoring Unit ...................................................................................................Page 8
Important Safety Instructions .......................................................................Page 9
Registration, Service & Aassembly ........................................................... Page 10
Inspection/Maintenance ............................................................................. Page 11
Step 1 .................................................................................................................. Page 12
Step 2 .................................................................................................................. Page 13
Step 3 .................................................................................................................. Page 14
Step 4 .................................................................................................................. Page 15
Parts List ............................................................................................................. Page 16
Pre-Assembled Components ...............................................................Page 17-18
Notes ................................................................................................................... Page 19
Warranty ............................................................................................................ Page 20
Tu Stu Fitness International Inc. continually engages in research related to product improvements. Please take the time to carefully read through
this owner’s manual thoroughly. Instructions contained in this owner’s manual are not intended to cover all details or variations possible with
equipment, or to cover every contingency that may be met in conjunction with assembly, installation, operation, maintenance or troubleshooting of
the equipment. Eventhough we have prepared this owner’s manual with extreme care, neither the manufacturer nor the author can accept
responsibility for any errors in, or omission from, the information given. Should additional information be required, or should situations arise that are
not covered by this owner’s manual, the matter should be directed to Customer Service at Tu Stu Fitness International Inc. in Chino, California.
2
CPR-265 Power Cagewww.tu stu tness.com
Page 3
Overhead Speci cations
MAX-LOAD WEIGHT LIMIT - 600 lbs WEIGHT LOAD
L 52” X W 51” X H 84”
PRODUCT WEIGHT - 218 lbs
www.tu stu tness.comCPR-265 Power Cage
3
Page 4
Carefully read ALL Danger, Warning & Caution labels posted on the machine
Șş
39
ȘŜŘ
ȘŗŖ
36
27
25
ȘŜŖ
31
27
37
29
ȘŜŗ
ȘŜř
28
38
26
4
CPR-265 Power Cagewww.tu stu tness.com
Page 5
Carefully read ALL Danger, Warning & Caution labels posted on the machine
35
32
29
39
25
ȘŜŖ
32
33
ȘŜř
27
ȘŜŗ
ȘŗŖ
Șş
28
ȘŜŘ
24
34
www.tu stu tness.comCPR-265 Power Cage
28
5
Page 6
Carefully read ALL Danger, Warning & Caution labels posted on the machine
34
33 3738
29
31
27
28
32
25
24
6
CPR-265 Power Cagewww.tu stu tness.com
Page 7
Carefully read ALL Danger, Warning & Caution labels posted on the machine
35 36
26
39
23
It is extremely important that the Facility Sign shown to the left
be installed in plain view of the unit.
You should have received it along with this Owner’s Manual. If
you did not receive this Facility Sign with your order, you can
obtain one at no cost to you from Tu Stu Fitness by contacting
our service department at:
1 (888) 884-8275
service@tu stu .net
service1@tu stu .net
www.tu stu tness.comCPR-265 Power Cage
7
Page 8
Anchoring Unit
Holes on base frame are provided for anchoring the unit to the oor.
(See anchoring hole locations below)
8
ANCHORING HOLES
CPR-265 Power Cagewww.tu stu tness.com
Page 9
Important Safety Instructions
It is the responsibility of the facility owner and/or owner of the equipment to review the Owner’s Manual with their facility
personnel and understand all Danger, Warning and Caution labels a xed on the machine. It is the responsibility of the oor
personnel to instruct users on proper operation of the equipment and review all danger, warning and caution labels.
SERIOUS INJURY OR DEATH CAN OCCUR
IF THESE SAFETY PRECAUTIONS ARE NOT OBSERVED:
1. Obtain a medical exam before beginning any exercise program.
2. Read and understand Owner’s Manual and all Danger, Warning
and Caution labels before using this equipment. If you still need
help, seek assistance from oor personnel.
3. Inspect the equipment before each use for wear and tear, loose
ttings, worn or frayed cables and frame welds. DO NOT USE if it
appears to be inoperable or damaged.
4. Stop exercising if you feel faint or dizzy. Consult a physician if you
are experiencing pain.
5. Use this equipment only for the intended use.
6. Keep body, clothing and hair clear from all moving parts. Do not
attempt to free any jammed parts by yourself.
7. Always warm-up before and cool-down after weight training.
Warm-up for 10-15 minutes with stretching and cardiovascular
exercises. Cool-down should include light stretching exercises for
5-15 minutes.
8. Never hold your breath – will limit the ow of oxygen to your brain
and may cause dizziness. The most often used breathing pattern is
inhaling during least resistance and exhaling during maximum
resistance.
9. Do not use accessories or accessory attachments that are not
recommended by TFI.
10. Make sure selector pin is completely inserted. Use only the selector
pin provided by the manufacturer.
11. Never pin the weights in an elevated position. Do not use the
machine if found in this condition.
5. Provide an adequate safety perimeter between the machine,
walls and other equipment to ensure that the facility has proper
clearance for usage and training.
6. Post and disclose all safety, rules and regulations on a bulletin
board easily accessible to users.
7. Perform regular maintenance (see Inspection Label). Pay special
attention to areas most susceptible to wear and tear, including but
not limited to cables, pulleys and rubber grips.
8. Do not lean against or pull on the framework, weight stack or
any component at all times.
9. Children must not be allowed near the equipment. Teenager must
be supervised.
10. Replace immediately all parts at rst sign of wear or damage. If
unable to replace worn or damaged components/parts, remove
machine from service until the repair is made.
11. Use only genuine Tu Stu replacement parts. Failure to do so will
void warranty and could result in serious injury or death to the users.
12. Do not remove any decals a xed to the machine. Replace if
damaged.
13. Do not alter or modify the original manufacturer’s weight stack
with any add-on incremental weights, weight plates or
dumbbells except those with standard factory installed option.
14. Maintain a service contract with a TFI Authorized Dealer or a
Professional Service Company approved by TFI. Keep a service
log of all maintenance and repair activities. NOTICE: It is the sole
responsiblity of the owner or facility operator to ensure that regular
maintenance is performed.
Facility Safety Guidelines and Practices
1. Read and understand the Owner’s Manual before assembling,
servicing or using the equipment.
2. Equipment to be installed by TFI Authorized Dealer or
Professional Service Company approved by TFI.
3. Make sure each machine is set up and operated on a solid level
surface. Do not install equipment on an uneven surface.
4. Anchoring of equipment must be completed at time of
installation and inspected prior to use. Failure to anchor the
machine to the oor could cause the machine to tip or fall over
due to incorrect usage and misuse, and could result in serious
injury or death.
DANGER: indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: indicates a potentially hazardous situation which, if not
avoided, will result in death or serious injury.
CAUTION: indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
www.tu stu tness.comCPR-265 Power Cage
9
Page 10
Registration, Service & Assembly
Thank you for purchasing the CPR-265 Power Cage. This machine is part of the Tu Stu line of quality strength training
equipment. To maximize your use of the equipment, please study the Owner’s Manual thoroughly.
Registration
To avoid unnecessary delays on warranty parts and to insure that a
permanent record of your purchase is on le with our company, be
sure to register online at http://www.tu stu tness.com or mail to
address shown below within 10 days of purchase.
Obtaining Service
Please use this Owner’s Manual as your guide to all parts included in
your shipment. When ordering parts, you must specify the part number
and description from this owner’s manual. Use only genuine Tu Stu
replacement parts when servicing the equipment. Failure to do
so will void warranty and could result in serious injury or death.
For information about product operation or service:
Phone: 909-629-1600 Toll Free 888-884-8275
Fax: 909-629-4967
E-mail: service@tu stu .net or service1@tu stu .net
Hours: M–F 8:00 – 4:30 PST
Or write to: Tu Stu Fitness International Inc.
Customer Service
13971 Norton Avenue, Chino, CA 91710
Retain this Owner’s Manual for future reference when ordering
service or parts. To assist you better, please be prepared to
provide the following information:
1. Model Number 2. Place of Purchase
3. Serial Number 4. Part # and Description
Required Tools
The basic tools that you will need to assemble the CPR-265 but are not
limited to:
• 9/16” , 3/4”, 1/2” combination wrenches
• Adjustable wrench
• Ratchet wrench with 9/16” , 3/4”, 1/2” sockets
• External retaining ring pliers
• Rubber mallet, measuring tape & utility knife
• Super Lube® spray lubricant and grease
• Windex or household glass cleaner
Allow ample space around the machine for safe unrestricted use and
easier access.
Insert all bolts in the same direction. For aesthetic appearance, insert all
bolts in the same direction unless speci ed (in text or illustration) to do
otherwise.
Leave room for adjustments. Do not fully tighten fasteners until
instructed in the assembly steps to do so (to prevent any di culty with
alignment of parts during the assembly process). When not instructed,
tighten fasteners such as bolts, nuts and screws so the unit is stable, but
leave room for adjustments.
Assembly Tips
Read all “Notes” on each page before beginning each step.
While you may be able to assemble the CPR-265 using the illustrations
only, IMPORTANT safety notes and other tips are included in the text.
Some pieces may have extra holes that you will not use. Use only those
holes indicated in the instructions and illustration.
NOTE: With so many assembled parts, proper alignment and
adjustment is critical. While tightening the nuts and bolts,
be sure to leave room for nal adjustments.
CAUTION: Obtain assistance from TFI if you have di culty
assemblying the CPR-265. Please do not attempt to
complete the assembly as this could result in equipment
failure and serious injuries to the users.
Symbols & Description
Assembly Requirements
Follow these installation requirements when assemblying the CPR-265.
Use the overhead view on the Content Page to layout your oor plan
before assemblying.
Set up the CPR-265 on a clean, solid, at surface. A smooth, at surface
under the machine helps keep it level.
10
Loosely Tighten
70%
Fully Tighten
100%
Loosely Tighten
Loosely tighten all hardware in this step. DO NOT Fully
Tighten. Some component(s) may need pre-assembly
and or alignment during the assembly process.
Fully Tighten
Wrench tighten all hardware in this step.
CPR-265 Power Cagewww.tu stu tness.com
Page 11
Inspection/Maintenance
Perform regular maintenance (see Inspection Label). Pay special attention to areas most susceptible to wear and tear, including
but not limited to cables, pulleys and rubber grip. TFI recommends you maintain a service contract with a TFI Authorized Dealer or a
Professional Service Company approved by TFI. Keep a service log of all maintenance and repair activities. Extra copies can be downloaded
from our website www.tu stu tness.com
INSPECTION / MAINTENANCE RECORDS
DATE REPLACEMENT REPAIRS INSPECTED BY
WARRANTY REPAIRS
DATE REPLACEMENT REPAIRS INSPECTED BY
www.tu stu tness.comCPR-265 Power Cage
11
Page 12
Step 1
Step 1 Assembly List
Item # Description Qty.
2 REAR UPRIGHT RT 1
3 REAR UPRIGHT LT 1
4 FRONT UPRIGHT RT 1
5 FRONT UPRIGHT LT 1
*9 CARRIAGE CONNECTOR FRONT RT 1
*10 BAR HOLDER RT 1
*60 BAR HOLDER LT 1
*61 CARRIAGE CONNECTOR FRONT LT 1
*62 CARRIAGE CONNECTOR REAR RT 1
*63 CARRIAGE CONNECTOR REAR LT 1
ş
NOTE:
1. IT IS STRONGLY RECOMMENDED THAT
TWO PEOPLE PARTICIPATE IN THE
ASSEMBLY OF THIS UNIT.
2. PLASTIC KNOBS ON BAR HOLDERS AND
REFERENCE NUMBERS ON UPRIGHTS
MUST BE FACING INSIDE.
ȘŗŖ
Řř
ȘŜŖ
ȘŜŘ
Șş
Śś
ȘŜř
ȘŜŗ
UPRIGHT
CARDBOARD
NOTE:
1. DO NOT REMOVE THE CARBOARD FROM THE ITEMS LISTED
ABOVE AS IT IS USED TO ASSIST IN THIS STEP. SLIDE ITEMS
OVER THE UPRIGHTS TO PUSH THE CARBOARD OUT AS
SHOWN.
12
CPR-265 Power Cagewww.tu stu tness.com
Page 13
Step 2
Step 2 Assembly List
Item # Description Qty.
*1 BOTTOM FRAME 1
2 REAR UPRIGHT RT 1
3 REAR UPRIGHT LT 1
4 FRONT UPRIGHT RT 1
5 FRONT UPRIGHT LT 1
12 PLASTIC HORIZONTAL ELLIPTICAL SHOE 4
14 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 1 8
20 SPLIT LOCK WASHER Z/P 3/8” 8
21 FLAT WASHER SAE Z/P 3/8” 8
NOTE:
1. PLASTIC KNOBS ON BAR HOLDERS AND
REFERENCE NUMBERS ON UPRIGHTS
MUST BE FACING INSIDE.
Ř
ȘŗŖ
ŗŘ
ȘŜŖ
ř
ȘŜř
ŘŖ
ŗ
ŗŚ
ŘŖ
Řŗ
ŘŖ
ȘŜŘ
ŗŚ
ŗŚ
ȘŜŗ
ŗŚ
ŘŖ
Řŗ
Śś
Șş
ŗŚ
Řŗ
Řŗ
Loosely Tighten
Loosely Tighten
ŗŘ
70%
70%
Loosely tighten all hardware in this step.
DO NOT Fully Tighten. Some component(s)
may need pre-assembly and or alignment
during the assembly process.
www.tu stu tness.comCPR-265 Power Cage
13
Page 14
Step 3
Step 3 Assembly List
Item # Description Qty.
*7 CARRIAGE CONNECTOR TUBE 1
*8 CARRIAGE CONNECTOR TUBE W/HOLES 1
13 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 3/4 4
16 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 3 8
20 SPLIT LOCK WASHER B-Z/P 3/8” 4
21 FLAT WASHER SAE Z/P 3/8” 20
22 NYLON INSERT JAM LOCK NUT Z/P 3/8-16 8
Șŝ
ŗŜ Řŗ ŘŘ
Loosely Tighten
Loosely Tighten
Řŗ
Řŗ
Řŗ
ŘŖ
ŗř
ŗŜ
ŘŘ
Řŗ
Řŗ
ŘŘ
Řŗ
ŘŖ
ŗř
Řŗ
ŘŖ
ŗř
ȘŞ
Řŗ
ŘŘ
Řŗ
ŗŜ
Řŗ
ŘŖ
ŗř
ŗŜ
Řŗ
70%
70%
Loosely tighten all hardware in this step.
DO NOT Fully Tighten. Some component(s)
may need pre-assembly and or alignment
during the assembly process.
14
CPR-265 Power Cagewww.tu stu tness.com
Page 15
Step 4
Step 4 Assembly List
Item # Description Qty.
*6 TOP FRAME 1
11 REINFORCEMENT CORNER PLATE 2
15 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 2 1/2 4
17 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 3 1/2 2
18 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 3 3/4 4
19 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 4 3/4 4
21 FLAT WASHER SAE Z/P 3/8” 28
22 NYLON INSERT JAM LOCK NUT Z/P 3/8-16 14
ȘŜ
Řŗ
ŘŘ
ŗŝ
ŗś
Řŗ
ŘŘ
Řŗ
ŗŗ
Řŗ
ŗŝ
Řŗ
ŗś
Řŗ
ŘŘ
ŘŘ
ŘŘ Řŗ
Řŗŗś
Řŗ
ŘŘ
Řŗ
ŗŗ
ŘŘ
Řŗ ŗŞ
ŘŘ
ŗş
Řŗ
ŗś
Řŗ
ŗş
ŗŞ
Fully Tighten
100%
Fully Tighten
Wrench tighten all hardware in this and
previous loosely tighten steps.
www.tu stu tness.comCPR-265 Power Cage
15
Page 16
Parts List
COLOR CHART
GRAY= SUB-ASSEMBLY PARTS
BLACK= HARDWARE
CPR-265
CPR-265 REV0
Parts List
Item No. Description Rev. Part No. Qty. Item No. Description Rev.
1
BOTTOMȱȱFRAME
2
REARȱUPRIGHTȱRT
3
REARȱUPRIGHTȱLT
4
FRONTȱUPRIGHTȱRT
5
FRONTȱUPRIGHTȱLT
6
TOPȱFRAME
7
CARRIAGEȱCONNECTORȱTUBE
8
CARRIAGEȱCONNECTORȱTUBEȱ
9
CARRIAGEȱCONNECTOR
10
BARȱHOLDER
11
REINFORCEMENTȱCORNERȱPLATE
12
13
14
15
16
17
18
19
20
21
22 BNH2026 26 52 BNH2518
23
24 BNH3089 2 54 BNH3282
25 BNH2910 2 55 BNH0528
26 BNH3147 1 56 BNH1794
27 BNH2912 2 57
28 BNH3146 2 58
29 BNH2904 2 59 BNH0373 1
30 BNH3003 1
ȱHORIZONTALȱELLIPTICALȱSHOEȱW/LOCK
PLASTIC
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ3/4
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ1
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ2ȱ1/2
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ3
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ3ȱ1/2
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ3ȱ3/4
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ4ȱ3/4
SPLITȱLOCKȱWASHERȱZ/Pȱ3/8Ȉ
FLATȱWASHERȱSAEȱZ/Pȱ3/8Ȉ
NYLONȱINSERTȱJAMȱLOCKȱNUTȱZ/Pȱ3/8Ȭ16
FACILITYȱSIGNȱBEȱALERT!ȱTHEȱFITNESSȱEQUIPMENT…
LABELȬWARNINGȱANCHOR
LABELȬWARNINGȱATTENTIONȱUSERS!...
LABELȬTFIȱSERIALȱNO.ȱ2.5ȱXȱ1.5
LABELȬCAUTIONȱCHECKȱȱPULLȬPINȱISȱFULLY…
LABELȬDANGERȱCHECKȱRETAININGȱNUT…
LABELȬDANGERȱSAFETYȱSTOPS...ȱ
LABELȬDANGERȱSECUREȱBARȱCATCHȱ(SIZEȱ4ȱXȱ2)
W/HOLES
ȱBOLT,ȱ2ȱXȱ 1ȱ1/4Ȉ
0 UP8273 1 31 BNH2903
0 UP8274 1 32 BNH2916 2
0 UP8275 1 33 BNH3137 1
0 UP8276 1 34 BNH3135 1
0 UP8277 1 35
0 UP8278 1 36
0 UP8279 1 37 BNH3134 1
0 UP8280 1 38 BNH3136 1
0 UP8281 4 39 BNH4304 2
0 UP8188 2 40 CHROMEȱLEVERȱHANDLE 0 UP3930
0 UP8283 2 41
BNH3236 2 42 BNH2521
BNH2036 4 43
BNH2037 8 44 BNH2031
BNH2044 4 45 BNH1859
BNH2046 8 46 BNH4285
BNH2107 2 47 BNH2847
BNH4282 4 48
BNH2063 4 49 BNH1151
BNH2032 12 50 BNH4284
BNH2030 60 51 BNH0066 4
BNH3138
1 53 BNH4278
LABELȬDANGERȱUSEȱTHISȱEQUIPMENTȱONLY...ȱ
LABELȬIMPORTANTȱFORȱSMOOTHȱPERFORMANCE...
LABELȬINSPECTIONSȱRECOMMENDEDȱINSPECTION…
LABELȬSCHEDULEȱREPLACEMENTȱPARTS...
LABELȬWARNINGȱBARȱCATCHȱLT,ȱ 2ȱXȱ4ȱLT
LABELȬWARNINGȱBARȱCATCHȱRT,ȱ2ȱXȱ4ȱRT
LABELȬWARNING_SERIOUSȱINJURYȱORȱDEATH
LABELȬWARRANTYȱLIGHTȱCOMMERCIAL
TFIȱEMBLEMȱ1.88ȱHIGHȱXȱ1.98ȱWIDEȱBLUEȱANDȱCHROME
SWINGȱLOCKȱJȬHOOK 0
BUTTONȱHEADȱSOCKETȱCAPȱSCREWȱGRȬ8ȱBȬZ/Pȱ3/8Ȭ16ȱXȱ1ȱ1/4
FLATȱHEADȱSOCKETȱCAPȱSCREWȱZ/PȱM6Ȭ1.0ȱXȱ15
FLATȱWASHERȱSAEȱZ/P
NYLONȱSNAPȬINȱFINISHINGȱPLUGȱ9/16Ȉȱ(85985K17)ȱ100ȱPK
NYLONȱSPACERȱ10.5MMȱIDȱXȱ20MMȱODȱXȱ10MM
PLASTICȱCORNERȱTUBEȱGLIDEȱ7/8ȱXȱ10ȱ1/8
PLASTICȱSTRIPȱ5ȱMMȱXȱ44MMȱXȱ 695ȱMM
PUSHȱPULLȱPINȱ1/2ȱXȱ2ȱ3/4ȱDRILLEDȱASSY
SHOULDERȱBOLTȱALLOYȱ1/2ȱXȱ55MM
SINGLEȱSTRANDȱCONNECTINGȱLINKȱ#40
SOCKETȱSETȱSCREWȱBȬZ/Pȱ10Ȭ32ȱXȱ1/8
TORSIONȱSPRINGȱ21MM,ȱ3MMȱWIRE,ȱLCM
YELLOWȱGRIPȱ1/2ȱXȱ4ȱ1/2
BRONZEȱBUSHINGȱ1/2ȱXȱ5/8ȱXȱ1/2ȱXȱ7/8ȱXȱ1/8
PLASTICȱINSERTȱCAPȱELLIPTICALȱ2ȱXȱ4ȱ(50MMȱXȱ100MM)
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ1/2Ȭ13ȱXȱ2ȱ1/4
NYLONȱINSERTȱTHINȱPATTERNȱLOCKȱNUTȱZ/Pȱ1/2Ȭ13
HEXȱKEYȱALLOYȱ3/32Ȉȱȱȱȱȱȱȱȱ
ȱ1/2Ȉ
Part No.
BNH3143 1
BNH3144 1
UP8038 2
BNH3280 6
BNH3281 2
BNH2064 4
BNH2027 4
Qty.
1
4
2
12
2
2
24
4
2
4
2
4
8
4
Pre-Assembled Components
ItemȱNo. Description Rev. PartȱNo. Qty. ItemȱNo. Description Rev. PartȱNo. Qty.
*1
BOTTOMȱȱFRAME
*6
TOPȱFRAME
*7
CARRIAGEȱCONNECTORȱTUBE
*8
CARRIAGEȱCONNECTORȱTUBEȱW/HOLES
*9
CARRIAGEȱ
CONNECTORȱFRONTȱRT
16
0 UP8273X1 1
0 UP8278X1 1
0 UP8279X1 1
0 UP8280X1 1
0 UP8281X1 1
www.tu stu tness.com CPR-265 Power Cagewww.tu stu tness.com
*10
BARȱHOLDERȱRT
*60
BARȱHOLDERȱLT
*61
CARRIAGEȱCONNECTORȱFRONTȱLT
*62
CARRIAGEȱCONNECTORȱREARȱRT
*63
CARRIAGEȱCONNECTORȱREARȱLT
0 UP8188X1 1
0
UP8188X2
0
UP8281X2
0
UP8281X3
0
UP8281X4
1
1
1
1
Page 17
Pre-Assembled Components
*1
UP8273X1
ŗ
*7
UP8279X1
Śř
ŘŚ
ŘŜ
řŞ
ŚŞ
Śś
*6 UP8278X1
ŘŚ
*8 UP8280X1
śŜ
Ŝ
śŜ
Śř
ŚŞ
*10
UP8188X1
ŚŚ
ŘŘ
Řŗ
Śŝ
śř
řş
Śŝ
ŗŖ
řŘ
řŜ
ŚŚ
śŖ
ŝ
*60 UP8188X2
Śŝ
řŘ
řś
ŚŚ
Řŗ
ŘŘ
ŗŖ
řş
Śŝ
ŚŚ
Ş
śŖ
śř
ŘŘ
ŘŘ
Śŗ
Řŗ
ŚŜ
ŚŘ
ŚŜ
ŚŘ
Śŗ
Řŗ
www.tu stu tness.comCPR-265 Power Cage
17
Page 18
Pre-Assembled Components
*9
UP8281X1
śŝ
ŚŚ
śŗ
śŗ
śś śś
ŘŞ
śŘ
Śş
ŚŚ
*61 UP8281X2
ŚŝŚŝ
ş
řŝ
Řş
Řŝ
śŞ
Śŝ Śŝ
ş
řŗ
Řş
ŚŚ
śŝ
Řŝ
Śş
ŘŞ
śŞŚŚ
śś śŗ
śŚ
*62
śŚ
UP8281X3
Śŝ Śŝ
řř
ŚŚ
śŝ
Řŝ
ş
Řś
ŚŖ
Śş
ŘŞ
śŗ
śŞŚŚ
śś śŗ
śŚ
śŘ
*63 UP8281X4
śŝ
ŚŚ
śŗ
śŗ
śś
śŘ
ŘŞ
Śŝ
śś
śŗ
śŗ śś
Śş
ŚŖ
Śŝ
ş
řŚ
Řś
Řŝ
ŚŚ
śŞ
śŘ
śŗ
18
śŗ śś
ŚŖ
www.tu stu tness.com CPR-265 Power Cagewww.tu stu tness.com
śŚ
ŚŖ
śŗ
Page 19
Notes
www.tu stu tness.comCPR-265 Power Cage
19
Page 20
LIGHT COMMERCIAL WARRANTY
This warranty applies only in the United St
TuffStuff brand name. TFI warrants to the original purchaser that TuffStuff equipment will be free from defects in material and workmanship.
All warranty periods begin to run from the date of purchase to the original purchaser. The warranty and remedies set forth herein are conditioned
upon proper storage
not manufactured by TFI or products which are altered without the express written consent of TFI.
, installation, use and maintenance and conformance with any recommendations of TFI. This warranty does not cover products
LIGHT COMMERCIAL WARRANTY:
TEN (10) Years: Structural main frames, welds, cams and
weight plates.
FIVE (5) Years: Pivot bearings, pulleys, bushings, guide rods
and gas shocks.
ONE (1) Year: Belts, linear bearings and pull-pin components.
All other parts not mentioned elsewhere in the warranty will expire one
(1) year from the date of purchase to the original purchaser.
SIX (6) Months: Upholstery, cables
Light Commercial Use:
Light Commercial Warranty applies to facilities like hotels, apartment complexes,
personal training studios, fire & police stations, etc. where the equipment
would be used by no more than 30 people per day.
ates to the products manufactured or distributed by TuffStuff Fitness International (TFI) under the
HOME LIFETIME WARRANTY:
LIFETIME of the equipment while owned by the original
purchaser (applies only to defects from manufacturer only).
This warranty does not cover:
1. TuffStuff products sold for and used in a commercial or
institutional environment.
2. Any damage, failure or loss caused by accident, misuse, neglect,
, finish and rubber grips.
abuse, improper assembly, improper maintenance, or failure to
follow instructions or w
warning labels posted on the machines.
3. Use of the product in a manner for which it was not designed.
4. Original product that is altered, or the use of replacement parts
and components of another manufacturer other than TuffStuff.
arnings in the owner’s manual and
The obligation of TFI under this warranty is limited to repairing or replacing warranted defective parts as TFI may elect, at TFI’s facilit
California, without charge to the purchaser. Purchaser is responsible for installation of repaired or replaced parts, and all transportation and
insurance costs on returned or replaced equipment to and from TFI’s facility in Chino.
THE FOREGOING SHALL CONSTITUTE THE SOLE REMEDY OF THE PURCHASER AND THE SOLE LIABILITY OF TFI WITH REGARD TO WARRANTY. NO IMPLIED STATUTORY
WARRANTY OR IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. IN NO EVENT, WHETHER AS A
RESULT OF BREACH OF CONTRACT, WARRANTY, NEGLIGENCE OR OTHERWISE, SHALL TFI BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE, LOSS OF USE OF EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTION EQUIPMENT, DOWNTIME
COST, OR CLAIMS OF CUSTOMERS OR PURCHASER FROM SUCH DAMAGE.
This written warranty is the final, complete and exclusive agreement of the parties with respect to the quality or performance of the equipment
and no action for breach of this written warranty or any implied warranty shall be commenced more than one (1) year after the accrual of the cause
of action. No modification of this warranty or waiver of
sentative of the party. Contact TuffStuff Fitness International at 13971 Norton Avenue, Chino, CA 91710, before returning any defective equipment.
This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state.
its terms shall be binding on either party unless approved in writing by an authorized repre-
y in Chino,
SERIAL #
Write your Serial number here for future reference
TuStu Fitness International, Inc.
13971 Norton Avenue, Chino, CA 91710, USA Phone: 909-629-1600 Fax: 909-629-4967
www.tustutness.com service@tustu.net or service1@tustu.net
Purchase Date
Loading...