TuffStuff CGH-450 Owner's Manual

TUFFSTUFF FITNESS INTERNATIONAL

OWNER’S MANUAL

Maintenance & Assembly Instructions

IMPORTANT: KEEP THIS MANUAL FOR FUTURE REFERENCE

NOTICE

It is the Purchaser’s/Owner’s obligation:

1. To disclose and post all Rules & Regulations, Danger, Warning and Caution
labels a xed on the machine to their customers/users.

2. Equipment to be installed by TFI Authorized Dealer or a service company
approved by TFI.

3. Provide trained personnel, supervision and correct usage of the equipment.

4. Provide scheduled inspection, maintenance & repairs and must be performed
by TFI Authorized Dealer or a service company approved by TFI.

5. Must use only genuine Tu Stu replacement parts.

CGH-450

Glute Ham Bench

CGH-450_Rev0

Revision Date 5-14-2014

Table of Contents

OVERHEAD SPECIFICATIONS .........................................................................Page 2

DANGER, WARNING, & CAUTION LABELS INFORMATION ...............Page 3-5

IMPORTANT SAFETY INSTRUCTIONS ..........................................................Page 6

REGISTRATION, SERVICE & ASSEMBLY ........................................................Page 7

INSPECTION/MAINTENANCE ......................................................................... Page 8

ASSEMBLY STEPS ........................................................................................ Page 9-12

PARTS LIST ......................................................................................................... Page 13

PRE-ASSEMBLED COMPONENTS .........................................................Page 14-15

WARRANTY ....................................................................................................... Page 16

Tu Stu Fitness International Inc. continually engages in research related to product improvements. Please take the time to carefully read through
this owner’s manual thoroughly. Instructions contained in this owner’s manual are not intended to cover all details or variations possible with
equipment, or to cover every contingency that may be met in conjunction with assembly, installation, operation, maintenance or troubleshooting of
the equipment. Eventhough we have prepared this owner’s manual with extreme care, neither the manufacturer nor the author can accept
responsibility for any errors in, or omission from, the information given. Should additional information be required, or should situations arise that are
not covered by this owner’s manual, the matter should be directed to Customer Service at Tu Stu Fitness International Inc. in Chino, California.

2

L 64” X W 37” X H 42”

PRODUCT WEIGHT 120 lbs

CGH-450 Glute Ham Benchwww.tu stu tness.com

Carefully read ALL Danger, Warning & Caution labels posted on the machine

49

40

45

42

39

40

44

47

46

50

CGH-450 Glute Ham Bench www.tu stu tness.com

3

Carefully read ALL Danger, Warning & Caution labels posted on the machine

41

43

48

39

47

It is extremely important that the Alert Sign for home shown to
the left be installed in plain view of the unit.

You should have received it along with this Owners Manual. If
you did not receive this Alert Sign for home with your order, you
can obtain one at no cost to you from Tu Stu Fitness by
contacting our service department at:

4

1 [phone]
service@tu stu .net
service1@tu stu .net

CGH-450 Glute Ham Benchwww.tu stu tness.com

Carefully read ALL Danger, Warning & Caution labels posted on the machine

45 44 46 43

40

39

42

CGH-450 Glute Ham Bench www.tu stu tness.com

50

4941

47

5

Important Safety Instructions

It is the responsibility of the facility owner and/or owner of the equipment to review the Owner’s Manual with their facility
personnel and understand all Danger, Warning and Caution labels a xed on the machine. It is the responsibility of the  oor
personnel to instruct users on proper operation of the equipment and review all danger, warning and caution labels.

SERIOUS INJURY OR DEATH CAN OCCUR
IF THESE SAFETY PRECAUTIONS ARE NOT OBSERVED:

1. Obtain a medical exam before beginning any exercise program.

2. Read and understand Owner’s Manual and all Danger, Warning
and Caution labels before using this equipment. If you still need
help, seek assistance from  oor personnel.

3. Inspect the equipment before each use for wear and tear, loose
 ttings, worn or frayed cables and frame welds. DO NOT USE if it
appears to be inoperable or damaged.

4. Stop exercising if you feel faint or dizzy. Consult a physician if you
are experiencing pain.

5. Use this equipment only for the intended use.

6. Keep body, clothing and hair clear from all moving parts. Do not
attempt to free any jammed parts by yourself.

7. Always warm-up before and cool-down after weight training.
Warm-up for 10-15 minutes with stretching and cardiovascular
exercises. Cool-down should include light stretching exercises for
5-15 minutes.

8. Never hold your breath – will limit the  ow of oxygen to your brain
and may cause dizziness. The most often used breathing pattern is
inhaling during least resistance and exhaling during maximum
resistance.

9. Do not use accessories or accessory attachments that are not
recommended by TFI.

8. Children must not be allowed near the equipment. Teenager must
be supervised.

9. Replace immediately all parts at  rst sign of wear or damage. If
unable to replace worn or damaged components/parts, remove
machine from service until the repair is made.

10. Use only genuine Tu Stu replacement parts. Failure to do so will
void warranty and could result in serious injury or death to the users.

11. Do not remove any decals a xed to the machine. Replace if
damaged.

12. Do not alter or modify the original manufacturer’s weight stack
with any add-on incremental weights, weight plates or
DUMBELLS except those with standard factory installed option.

13. Maintain a service contract with a TFI Authorized Dealer or a
Professional Service Company approved by TFI. Keep a service
log of all maintenance and repair activities. NOTICE: It is the sole
responsiblity of the owner or facility operator to ensure that regular
maintenance is performed.

Facility Safety Guidelines and Practices

1. Read and understand the Owner’s Manual before assembling,
servicing or using the equipment.

2. Equipment to be installed by TFI Authorized Dealer or
Professional Service Company approved by TFI.

3. Make sure each machine is set up and operated on a solid level
surface. Do not install equipment on an uneven surface.

4. Provide an adequate safety perimeter between the machine,
walls and other equipment to ensure that the facility has proper
clearance for usage and training.

5. Post and disclose all safety, rules and regulations on a bulletin
board easily accessible to users.

6. Perform regular maintenance (see Inspection Label). Pay special
attention to areas most susceptible to wear and tear, including but
not limited to cables, pulleys and rubber grips.

7. Do not lean against or pull on the framework, weight stack or
any component at all times.

6

DANGER: indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING: indicates a potentially hazardous situation which, if not
avoided, will result in death or serious injury.

CAUTION: indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.

CGH-450 Glute Ham Benchwww.tu stu tness.com

Registration, Service & Assembly

Thank you for purchasing the CGH-450 Glute Ham Bench. This machine is part of the Tu Stu line of quality strength training
equipment. To maximize your use of the equipment, please study the Owner’s Manual thoroughly.

Registration
To avoid unnecessary delays on warranty parts and to insure that a
permanent record of your purchase is on  le with our company, be
sure to register online at http://www.tu stu tness.com or mail to
address shown below within 10 days of purchase.

Obtaining Service

Please use this Owner’s Manual as your guide to all parts included in
your shipment. When ordering parts, you must specify the part number
and description from this owner’s manual. Use only genuine Tu Stu
replacement parts when servicing the equipment. Failure to do
so will void warranty and could result in serious injury or death.

For information about product operation or service:
Phone: [phone] Toll Free 888-884-8275
Fax: [phone]
E-mail: service@tu stu .net or service1@tu stu .net
Hours: M–F 8:00 – 4:30 PST
Or write to: Tu Stu Fitness International Inc.
Customer Service
13971 Norton Avenue, Chino, CA 91710

Retain this Owner’s Manual for future reference when ordering
service or parts. To assist you better, please be prepared to
provide the following information:

1. Model Number 2. Place of Purchase

3. Serial Number 4. Part # and Description

Required Tools

The basic tools that you will need to assemble the CGH-450 but are not
limited to:

• 9/16” , 3/4”, 1/2” combination wrenches

• Adjustable wrench

• Ratchet wrench with 9/16” , 3/4”, 1/2” sockets

• External retaining ring pliers

• Rubber mallet, measuring tape & utility knife

• Super Lube® spray lubricant and grease

• Windex or household glass cleaner

Allow ample space around the machine for safe unrestricted use and
easier access.

Insert all bolts in the same direction. For aesthetic appearance, insert all
bolts in the same direction unless speci ed (in text or illustration) to do
otherwise.

Leave room for adjustments. Do not fully tighten fasteners until
instructed in the assembly steps to do so (to prevent any di culty with
alignment of parts during the assembly process). When not instructed,
tighten fasteners such as bolts, nuts and screws so the unit is stable, but
leave room for adjustments.

Assembly Tips

Read all “Notes” on each page before beginning each step.

While you may be able to assemble the CGH-450 using the illustrations
only, IMPORTANT safety notes and other tips are included in the text.

Some pieces may have extra holes that you will not use. Use only those
holes indicated in the instructions and illustration.

NOTE: With so many assembled parts, proper alignment and
adjustment is critical. While tightening the nuts and bolts,
be sure to leave room for  nal adjustments.

CAUTION: Obtain assistance from TFI if you have di culty
assemblying the CGH-450. Please do not attempt to
complete the assembly as this could result in equipment
failure and serious injuries to the users.

Symbols & Description

Assembly Requirements

Follow these installation requirements when assemblying the CGH-450.
Use the overhead view on the Content Page to layout your  oor plan
before assemblying.

Set up the CGH-450 on a clean, solid,  at surface. A smooth,  at surface
under the machine helps keep it level.

Loosely Tighten

70%

Fully Tighten

100%

CGH-450 Glute Ham Bench www.tu stu tness.com

Loosely Tighten

Loosely tighten all hardware in this step. DO NOT Fully
Tighten. Some component(s) may need pre-assembly
and or alignment during the assembly process.

Fully Tighten

Wrench tighten all hardware in this step.

7

Inspection/Maintenance

Perform regular maintenance (see Inspection Label). Pay special attention to areas most susceptible to wear and tear, including
but not limited to cables, pulleys and rubber grip. TFI recommends you maintain a service contract with a TFI Authorized Dealer or a
Professional Service Company approved by TFI. Keep a service log of all maintenance and repair activities. Extra copies can be downloaded
from our website www.tu stu tness.com

INSPECTION / MAINTENANCE RECORDS

DATE REPLACEMENT REPAIRS INSPECTED BY

8

WARRANTY REPAIRS

DATE REPLACEMENT REPAIRS INSPECTED BY

CGH-450 Glute Ham Benchwww.tu stu tness.com

Step 1

Step 1 Assembly List

Item # Description Qty.

*1 BASE FRAME 1

*2 REAR STABILIZER 1
10 BENT REINFORCEMENT PLATE 1
15 PLASTIC HORIZONTAL ELLIPTICAL SHOE 4

23 FLAT WASHER SAE Z/P 1/2” BENT 4
33 HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 5 1/4 2
35 NYLON INSERT LOCK NUT Z/P 1/2-13 2

řř

ŗŖ

Řř

ŗś

ȘŘ

ŗś

Řř

Șŗ

řś

ŗś

CGH-450 Glute Ham Bench www.tu stu tness.com

Loosely Tighten

Loosely Tighten

ŗś

70%

70%

Loosely tighten all hardware in this step.
DO NOT Fully Tighten. Some component(s)
may need pre-assembly and or alignment
during the assembly process.

9

Step 2

Step 2 Assembly List

Item # Description Qty.

3 SELECTOR TUBE 1
*4 CARRIAGE 1
*9 FRONT UPRIGHT 1

19 SPLIT LOCK WASHER Z/P 3/8” 1
20 SPLIT LOCK WASHER Z/P 1/2” 2
21 FLAT WASHER SAE Z/P 3/8” 7
22 FLAT WASHER SAE Z/P 1/2” 2
27 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 2 1/4 2
29 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 2 3/4 2
32 HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 1 1/4 2
34 NYLON INSERT LOCK NUT Z/P 3/8-16 3

ȘŚ

Řş

ŗş

Řŗ

ř

ŘŗŘŝ

Șş

Řş

Řŗ

Řŗ řŚ

Řŗ

řŚ

řŘ

řŚ

ŘŘ

ŘŖ

Loosely Tighten

Loosely Tighten

70%

70%

Loosely tighten all hardware in this step.
DO NOT Fully Tighten. Some component(s)
may need pre-assembly and or alignment
during the assembly process.

10

CGH-450 Glute Ham Benchwww.tu stu tness.com

Step 3

Step 3 Assembly List

Item # Description Qty.

*5 LEG HOLDER FRAME 1

6 FOOT ROLL TUBE 1 RD X 18 7/8 2

*7 ADJUSTABLE LEG HOLDER TUBE 1
*8 ABDOMEN PAD SUPPORT 1

17 NYLON SPACER 3/8 X 3/4 X 3/8 2
18 SPLIT LOCK WASHER Z/P 1/4 2
19 SPLIT LOCK WASHER Z/P 3/8” 3
20 SPLIT LOCK WASHER Z/P 1/2” 2
21 FLAT WASHER SAE Z/P 3/8” 5
22 FLAT WASHER SAE Z/P 1/2” 2
25 HEX HEAD CAP SCREW GR-5 Z/P 1/4-20 X 3/4 2
26 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 1 3
30 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 3 1/2 1
31 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 4 3/4 1
32 HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 1 1/4 2
34 NYLON INSERT LOCK NUT Z/P 3/8-16 2

Șŝ

Řś

Ŝ

ŗŞ

Note:

1. Line up hole on item #6 with hole on item
#*5 to lock tube in place with screw #25.

řŚ

Șŝ

ŗŝ

ŗŝ

řŖ

ȘŞ

Řŗ řŚ

Hole

Hole

ŘŘ

ŘŖ

řŘ

Ŝ

ŘŘ

Řŗ

ŗŞ

řŗ

ŘŖ

Řś

Șś

řŘ

ŘŜ

ŗş

Řŗ

ŘŜ

ŗş

Řŗ

Řŗ

ŗş

ŘŜ

Fully Tighten

CGH-450 Glute Ham Bench www.tu stu tness.com

100%

Fully Tighten

Wrench tighten all hardware in this and
previous loosely tighten steps.

11

Step 4

Step 4 Assembly List

Item # Description Qty.

11 ABDOMEN PAD 2
12 LEG SUPPORT PAD 2

*13 FOAM FOOT ROLL 1 X 4 X 7 W/VINYL 4

16 ALUMINUM WASHER .390 ID X 1.500 OD X .150 THK 4
19 SPLIT LOCK WASHER B-Z/P 3/8” 4
21 FLAT WASHER SAE Z/P 3/8” 8
24 BUTTON HEAD SOCKET CAP SCREW Z/P 3/8-16 X 1 4
28 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 2 1/2 8

ŗŘ

ŘŚ

ŗş

ŗŜ

ŗř

ŗŗ

ŗŗ

ŗŘ

ŘŚ

ŗř

Fully Tighten

Řŗ

Řŗ

ŘŞ

ŘŞ

ŘŞ

ŗř

ŘŚ

ŗř

ŗŜ

ŗş

ŘŚ

100%

Fully Tighten

Wrench tighten all hardware in this step.

12

CGH-450 Glute Ham Benchwww.tu stu tness.com

Parts List

K

COLOR CHART

GRAY= SUB-ASSEMBLY PARTS

BLACK= HARDWARE

CGH-450

CGH-450 Rev0

Parts List

Item No. Description Rev. Part No. Qty. Item No. Description Rev. Part No. Qty.

1 BASEȱFRAME 0 UP8310 1 34
2 REARȱSTABILIZER 0 UP8311 1 35
3 SELECTORȱTUBE 0 UP8312 1 36
4 CARRIAGE 0 UP8313 1 37
5 LEGȱHOLDERȱFRAME 0 UP8314 1 38
6 FOOTȱROLLȱTUBEȱ1ȱRDȱXȱ18ȱ7/8 0 UP8315 2 39
7 ADJUSTABLEȱLEGȱHOLDERȱTUBE 0 UP8316 1 40
8 ABDOMENȱPADȱSUPPORT 0 UP8317 1 41

9 FRONTȱUPRIGHT 0 UP8318 1 42
10 BENTȱREINFORCEMENTȱPLATE 0 UP8319 1 43
11 ABDOMENȱPAD 0 UP8320 2 44
12 LEGȱSUPPORTȱPAD 0 UP8321 2 45
13 FOAMȱFOOTȱROLLȱ1ȱXȱ4ȱXȱ7ȱW/VINYL 0 UP8168 4 46

FOAMȱROLLȱ1ȈȱNYLINERȱBUSHING

14
15

PLASTICȱHORIZONTALȱELLIPTICALȱSHOEȱȱȱȱȱȱȱȱȱȱȱȱȱȱȱȱ BNH1847 4
ALUMINUMȱWASHERȱ.390ȱIDȱXȱ1.500ȱODȱXȱ.150ȱTH

16

NYLONȱSPACERȱ3/8ȱXȱ3/4ȱXȱ3/8ȱȱȱȱȱȱȱȱȱȱȱȱȱȱȱȱȱȱȱȱȱ

17

SPLITȱLOCKȱWASHERȱZ/Pȱ1/4

18

SPLITȱLOCKȱWASHERȱZ/Pȱ3/8Ȉ

19

SPLITȱLOCKȱWASHERȱZ/Pȱ1/2Ȉ

20

FLATȱWASHERȱSAEȱZ/Pȱ3/8Ȉ

21

FLATȱWASHERȱSAEȱZ/Pȱ1/2Ȉ

22

FLATȱWASHERȱSAEȱZ/Pȱ1/2ȈȱBENT

23

BUTTONȱHEADȱSOCKETȱCAPȱSCREWȱZ/Pȱ3/8Ȭ16ȱXȱ1

24
25

HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ1/4Ȭ20ȱXȱ3/4 BNH2106 2

26

HEXȱHEADȱCAPȱSCREWȱGRȬ5

27

HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ2ȱ1/4 BNH2042 2

28

HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ2ȱ1/2 BNH2044 8

29
30
31
32
33 HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ1/2Ȭ13ȱXȱ5ȱ1/4 BNH2114 2 66

ȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ2ȱ3/4 BNH2045 2

HEX
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ3ȱ1/2 BNH2107 1
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱ
HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ1/2Ȭ13ȱXȱ1ȱ1/4 BNH2167 4

ȱZ/Pȱ3/8Ȭ16ȱXȱ1 BNH2037 3

Xȱ4ȱ3/4 BNH2063 1

BNH2025 8

BNH1541 4
BNH0392 2
BNH2686 2
BNH2032 8
BNH0572 4
BNH2030 26
BNH2031 4
BNH3270 4
BNH2033 4

NYLONȱINSERTȱLOCKȱNUTȱZ/Pȱ3/8Ȭ16 BNH2028 8
NYLONȱINSERTȱLOCKȱNUTȱZ/Pȱ1/2Ȭ13 BNH2029 2
HEXȱKEYȱALLOYȱ7/32Ȉ BNH0575
HEXȱKEYȱ3/32Ȉ BNH2543 1
HEXȱKEYȱALLOYȱ5/16Ȉ BNH0374
LABELȬCAUTIONȱCHECKȱȱ
LABELȬDANGERȱCHECKȱRETAININGȱNUT...ȱȱ1.5ȱXȱ1 BNH3146 2
LABELȬDANGERȱUSEȱTHISȱEQUIPMENTȱONLY...ȱ BNH2903 1
LABELȬIMPORTANTȱFORȱSMOOTHȱPERFORMANCE... BNH2916 2
LABELȬINSPECTIONSȱRECOMMENDEDȱINSPECTION… BNH3137 1
LABELȬSCHEDULEȱREPLACEMENTȱPARTS... BNH3135 1
LABELȬWARNING_SERIOUSȱINJURYȱORȱDEATH BNH3134 1
LABELȬWARRANTYȱLIGHTȱCOMMERCIAL BNH3136 1

47

TFIȱEMBLEMȱ1.88ȱHIGHȱXȱ1.98ȱWIDEȱBLUEȱANDȱCHROME BNH4304 2

48

FACILITYȱSIGNȱBEȱALERT!ȱTHEȱFITNESSȱEQUIPMENT... BNH3138 1

49

LABELȬWARNINGȱATTENTIONȱUSERS!... BNH2910 1

50

LABELȬTFIȱSERIALȱNO.ȱ2.5ȱXȱ1.5 BNH3147 1

51

HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ4
PLASTICȱINSERTȱCAPȱ1ȱ1/2ȈȱXȱ2ȱ1/2Ȉ BNH2670 4

52

PLASTICȱINSERTȱCAPȱ1ȱ1/4ȈȱRDȱ10Ȭ12ȱGA BNH3275 6

53

PLASTICȱINSERTȱCAPȱ1ȈȱRDȱ10Ȭ12ȱGA

54

PLASTIC

55

PLASTICȱINSERTȱCAPȱELLIPTICALȱ2ȱXȱ4

56

PLASTICȱTUBEȱGLIDEȱ2ȱXȱ1ȱXȱ8

57

PULLȱPINȱ1/2ȱXȱ5ȱ5/8ȱLIGHTȱSPRING

58

PUSHȱPULLȱPINȱ1/2ȱXȱ2ȱ7/8ȱLIGHTȱSPRING

59

ROLLERȱWHEEL BNH2869 3

60

RUBBERȱGRIPȱ1ȱIDȱXȱ.125ȱXȱ4ȱ3/4 BNH3276 1

61

RUBBERȱGRIPȱ1ȱIDȱXȱ.125ȱXȱ6ȱ11/16 BNH3277 2

62

RUBBERȱGRIPȱ1.1875ȱIDȱXȱ.125ȱXȱ9ȱ1/2 BNH3278 2

63

RUBBERȱTUBEȱ1.875ȱIDȱXȱ.125ȱWALLȱXȱ6ȱ5/16 BNH3279 2

64

SOCKETȱSETȱSCREWȱZ/Pȱ10Ȭ32ȱXȱ1/8

65

URETHANEȱBUMPERȱ962 BNH0244 2

ȱINSERTȱCAPȱ2ȈȱRDȱ10Ȭ14ȱGA BNH0004 2

PULLȬPINȱISȱFULLY...ȱ1ȱ1/2ȱXȱ1ȱ3/8 BNH2912 2

BNH2267 3

BNH3271 1

BNH1794 1
BNH1874 2
BNH0701 1
BNH0542 1

BNH2088

1

1

2

Pre-Assembled Components

Item No. Description

*1 BASEȱFRAME 0 UP8310X1 1
*2 REARȱSTABILIZER 0 UP8311X1 1 *8 ABDOMENȱPADȱSUPPORT 0 UP8317X1 1
*4 CARRIAGE 0 UP8313X1 1 *9 FRONTȱUPRIGHT 0 UP8318X1 1
*5 LEGȱHOLDERȱFRAME 0 UP8314X1 1

Rev. Part No. Qty.

CGH-450 Glute Ham Bench www.tu stu tness.com

Item No. Description

*7

ADJUSTABLEȱLEGȱHOLDERȱTUBE 0 UP8316X1 1

Rev.

Part No. Qty.

13

Pre-Assembled Components

*1

UP8310X1

ŚŜ

śŖ

*2 UP8311X1

śŜ

Śř

ŗ

Ř

ŚŘ

Śś

*4

UP8313X1

ŜŜ

Ś

Řŗ

śŗ

śŗ

ŚŝŜś

ŜŖ

ŜŖ

śŞ

ŚŖ

řş

ŜŖ

řŚ

ŜŜ

Śŝ

řŚ

Řŗ

*5

UP8314X1

śŚ

Ŝŗ

ŜŚ

Śŗ

ŚŘ

śŝśŝ

śś

ŜŚ

Śş

ŚŖ

14

śś ś śş

Ŝś

řş

CGH-450 Glute Ham Benchwww.tu stu tness.com

Pre-Assembled Components

*7

UP8316X1

ŝ

ŜŘ

śř

*8

UP8317X1

śŘ

śŘ

śř

ŜŘ

śř

Ş

Ŝř

*9

UP8318X1

śř

śř

Ŝř

śř

ş

ŚŚ

CGH-450 Glute Ham Bench www.tu stu tness.com

15

LIGHT COMMERCIAL WARRANTY

This warranty applies only in the United St
TuffStuff brand name. TFI warrants to the original purchaser that TuffStuff equipment will be free from defects in material and workmanship.
All warranty periods begin to run from the date of purchase to the original purchaser. The warranty and remedies set forth herein are conditioned
upon proper storage
not manufactured by TFI or products which are altered without the express written consent of TFI.

, installation, use and maintenance and conformance with any recommendations of TFI. This warranty does not cover products

LIGHT COMMERCIAL WARRANTY:

TEN (10) Years: Structural main frames, welds, cams and

weight plates.

FIVE (5) Years: Pivot bearings, pulleys, bushings, guide rods

and gas shocks.

ONE (1) Year: Belts, linear bearings and pull-pin components.

All other parts not mentioned elsewhere in the warranty will expire one
(1) year from the date of purchase to the original purchaser.

SIX (6) Months: Upholstery, cables

Light Commercial Use:

Light Commercial Warranty applies to facilities like hotels, apartment complexes,
personal training studios, fire & police stations, etc. where the equipment
would be used by no more than 30 people per day.

ates to the products manufactured or distributed by TuffStuff Fitness International (TFI) under the

HOME LIFETIME WARRANTY:

LIFETIME of the equipment while owned by the original
purchaser (applies only to defects from manufacturer only).

This warranty does not cover:

1. TuffStuff products sold for and used in a commercial or
institutional environment.

2. Any damage, failure or loss caused by accident, misuse, neglect,

, finish and rubber grips.

abuse, improper assembly, improper maintenance, or failure to
follow instructions or w
warning labels posted on the machines.

3. Use of the product in a manner for which it was not designed.

4. Original product that is altered, or the use of replacement parts
and components of another manufacturer other than TuffStuff.

arnings in the owner’s manual and

The obligation of TFI under this warranty is limited to repairing or replacing warranted defective parts as TFI may elect, at TFI’s facilit
California, without charge to the purchaser. Purchaser is responsible for installation of repaired or replaced parts, and all transportation and
insurance costs on returned or replaced equipment to and from TFI’s facility in Chino.

THE FOREGOING SHALL CONSTITUTE THE SOLE REMEDY OF THE PURCHASER AND THE SOLE LIABILITY OF TFI WITH REGARD TO WARRANTY. NO IMPLIED STATUTORY
WARRANTY OR IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. IN NO EVENT, WHETHER AS A
RESULT OF BREACH OF CONTRACT, WARRANTY, NEGLIGENCE OR OTHERWISE, SHALL TFI BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE, LOSS OF USE OF EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTION EQUIPMENT, DOWNTIME
COST, OR CLAIMS OF CUSTOMERS OR PURCHASER FROM SUCH DAMAGE.

This written warranty is the final, complete and exclusive agreement of the parties with respect to the quality or performance of the equipment
and no action for breach of this written warranty or any implied warranty shall be commenced more than one (1) year after the accrual of the cause
of action. No modification of this warranty or waiver of
sentative of the party. Contact TuffStuff Fitness International at 13971 Norton Avenue, Chino, CA 91710, before returning any defective equipment.

This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state.

its terms shall be binding on either party unless approved in writing by an authorized repre-

y in Chino,

SERIAL #

Write your Serial number here for future reference

TuStu Fitness International, Inc.

13971 Norton Avenue, Chino, CA 91710, USA Phone: [phone] Fax: [phone]

www.tustutness.com service@tustu.net or service1@tustu.net

Purchase Date