tuact Venom-X4 User Manual
User’s manual
REV: 2017-10
TM
V
enom
X
4
mouse controller combo
Thank you for purchasing Tuact
V
enom
Package Includes
. Venom-X4 Mouse
. Venom-X4 Wand
. Venom-X4 Transceiver
. Joystick thumb rubber cap x 2
. Micro USB cable x 2
. PS4 controller cable Holder
. XBox One controller cable Holder
. Iron weights x 2
. Quick User’s Manual
X4
TM
.
V
enom
X4
TM
. Please read this manual before using your new
Introduce to
Mouse
Start
Profile Color LED
V
enom
TM
X4
Iron Weight Cover
Function Key: F(R)
Side action Keys:
G4/G5/G6/G7/G8
CPI switch
Iron Weight
Wand
L4
Transceiver
Profile Select/WiFi Button/
Multi-Function LED
Controller USB port
Pair Button
Mouse/Keyboard USB ports
Power/PS
Power LEDs
Function Key: F(L)D-Pad
Left Joystick/L3
Action Keys: L1,L2
Battery bay
Host Micro USB Jack:
to console or PC
External Power Supply Jack:
to 5V charger (optional)
Start with
Open the Iron Weight cover to put one or two weight to get comfortable mouse weight.
To open the cover:
Left up the cover at
the slot to open:
V
enom
X4
TM
mouse and wand
Put the weight irons onto the slots.
Switch the Mouse CPI:
Press the CPI button to switch the
mouse CPI, 3 preset value can be
selected, the LED color on Start
button indicates the corresponding
profile.
Open the wand battery cover to install battery :
Push in and lift up to open
Venom-X4 Wand works with one AA size battery: 1.2V Ni-CD/Ni-MH rechargeable, 1.5V carbon zinc or alkaline
battery.
Power saving: The Wand will enter into the standby mode automatically after 5 minutes no activities; and will be
turned off after 10 minutes to reduce the battery consumption.
Connect
Depending on the controller connected to
the front USB port, Venom-X4 identifies 5
gaming platforms, referred as the following
modes:
1. Console mode: Playstation 3/Playstation 4 Mode (including PS4 Slim and Pro);
Xbox360/XBox One Mode (including XBox
One S);
2. PC Mode.
A connected PS3/PS4, or an Xbox360/XboxOne controller will let the Venom-X4
Transceiver entering into the console
Battery
mode, the LED lights up with 1 of the 6
colors.
If no controller is connected to the Transceiver, it enters into the PC mode, the LED
lights up with white color.
V
enom
X4
TM
Host
PC
External Power Supply:
5V charger (option）
PS4/Slim/Pro
PS3 XBox360
Micro USB cable
XBox One/S
Note: For using with console, the controller MUST be connected to the Transceiver
all the time during the game play.
The PC mode is for PC game play and
Setup.
There is a PS4 and an Xbox One
cable holder included in the package.
Always install the holder to prevent the USB socket on controller from getting loose. More details about the
holder and the installation, please refer to the Cable/Holder installation guide at:
http://www.tuact.com/products/usb-cable-holder
Loading...