TTikorea TX1000U, TX1000UBT Instruction Manual
INSTRUCTION MANUAL
www.ttikorea.co.kr
INSTRUCTION MANUAL
TX1000UTX1000U
TX1000UBT
(
Bluetooth Compatible
)
TX1000UBT
(
Bluetooth Compatible
)
PMR446 TRANSCEIVER
Thank you for purchasing this radio.
All our products are built to offer excellent
value by combining advanced features,
great design and manufacturing quality.
To ensure you are familiar with the operation
and features of your radio, and in order to
obtain the best performance, please read
this manual carefully before operation.
Contents
Caution ..................................................................................
1.Radio Controls ....................................................................
2. Equipment and Accessories Supplied ..............................
3. Fitting the Battery pack .....................................................
4. Battery Charging ................................................................
5. Radio Controls ...................................................................
1. Power On/Off/Volume Control .....................................
2. Push-To-Talk (PTT) Button ........................................
3. Monitor Momentarily ...................................................
4. Function / Menu(Mode) Button ...................................
5. Dwon Button ...............................................................
6. Up Button .....................................................................
7. Keypad Lock / Scan & Scan Memory Button .............
6. LCD Display ......................................................................
7. Menu mode ......................................................................
8. Basic Radio Operation ......................................................
9. Radio Features Explained ................................................
10. Bluetooth Compatible Operation(Optional) ....................
11. Troubleshooting ..............................................................
12. CE Declaration ................................................................
13. Safety Requirements .....................................................
14. Technical Specifications ...............................................
15. Declaration of Conformity ...............................................
5
6
7
7
8
9
9
9
9
9
10
10
10
11
12
13
14
20
20
21
21
22
25
TX-1000U
5
Caution
IMPORTANT - READ ALL INSTRUCTIONS carefully and completely
before operating your radio and retain this manual for future reference.
NEVER connect the radio to a power source other than the supplied
battery. This may damage your product.
NEVER operate your radio with the antenna less than 5cm from
exposed parts of the body.
NEVER use the radio in or near a mining facility or other area which
uses remotely triggered explosives or an area labelled "Blasting Area".
NEVER
use or charge your radio in a potentially explosive atmosphere.
DO NOT place your radio in front of a vehicle airbag.
DO NOT operate your radio on board an aircraft.
DO NOT use your radio with a damaged antenna.
DO NOT attempt to modify your radio in any way.
ALWAYS charge your radio at normal room temperature.
ALWAYS switch off your radio where notices restrict the use of
two-way radio or mobile telephones.
ALWAYS replace the accessory jack cover (if applicable) when
the jack is not in use.
ONLY use TTI approved rechargeable batteries with the supplied charger.
AVOID charging your radio or battery pack while is it wet.
AVOID storing or charging your radio in direct sunlight.
AVOID storing or using your radio where temperatures are below
-20℃ or above +60
℃
① Antenna
②Strap Hole
③ TX/RX Indicator
④ PTT Button
⑤ Monitor Button
⑥ Belt Clip
⑦ Power ON/Off &
Volume Control Knob
⑧ Lock Button
⑨ Accessory Jack
⑩ Speaker
⑪ Microphone
⑫ LCD Display
⑬ Function / Menu Button
⑭ Down Button
⑮Up Button
9
3
5
6
7
8
10
11
12
13 14 15
1
2
4
1.Radio Controls
6
TX-1000U
Fitting
1. Ensure that your radio is switched off.
2. Align the battery pack with the bat tery
guide at the back of the radio.
3. Slide the battery pack up to the top
until you hear the snapping sound.
Removal
1. Ensure that your radio is switched off.
2. Press down on the battery release
catch and separate the battery pack
from the radio.
1.
TX1000U (or TX1000UBT) Radio with Antenna
2. Li-Ion Battery Pack
3. Charging Cradle
4. Power Adaptor
5. Belt Clip
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
2. Equipment and Accessories Supplied
3. Fitting the Battery pack
TX-1000U
7
To charge your radio, carefully follow these instructions:
1.
Connect the power adaptor to the mains power supply and
connect the adaptor charger jack to the charging cradle.
2.
Disconnect any radio accessories and ensure the radio is
switched off.
3. Insert the radio into the charging cradle until it 'Clicks' home.
The charger LED will glow red and charging will start. If the charger
LED blinks red or green or the charger LED does not light, re-insert
the radio into the charging cradle.
4. The battery charging time is about 4~5 hours. When the battery
is fully charged the green LED(Full) will be turned on.
Power Adaptor
-Input : 230VAC
-Output : 12VDC 1Ah
4. Battery Charging
8
TX-1000U
LED
Loading...