TTE Technology LE32M4S9 User Manual
LED LCD HDTV
OWNER’S GUIDE
Model:
Serial No.
CONGRATULATIONS
Thank you for purchasing this Hitachi product.
Please read these instructions carefully.
For additional assistance please call Toll Free
800.HITACHI (800.448.2244)
or visit our website at www.hitachi.us/tv.
Keep this Owner’s Guide for future reference.
Record the model name and serial number of your LCD
Television for future reference.This information is located
on the back of the television.
LE32M4S9
32” Class (31.51” Diagonal)
TABLE OF CONTENTS
2-6
7 HOW TO ATTACH / REMOVE THE STAND
8-12 FIRST TIME USE
14-18 TV OPERATION
19-21 RECEPTION DISTURBANCES
22 SPECIFICATIONS
24 LIMITED WARRANTY
IMPORTANT SAFETY INSTRUCTIONS
OG_M4S9_03182016
The lightning ash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product's enclosure that may be of sucient magnitude to
constitute a risk of electric shock.
AUTION:
C
ARNING:
W
T
CAUTION:
LEAD NO
This product contains lead. Dispose of this product in accordance with applicable environmental laws. For product recycling and disposal
information, contact your local government agency or www.eRecycle.org (in California), the Electronic Industries Alliance at www.
ecyclingcentral.com (in the U.S.) or the Electronic Product Stewardship Canada at www.epsc.ca (in Canada).
WARNING:
Ho
- R
- Incr
- Connect the equipment to an outlet on a cir
- Consult the dealer or an e
C
AUTION:
This Television receiver will display television closed captioning, (
TICE
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a
safety connection to electrical earth.
This equipment has been tested and f
Changes or modications not e
O REDUCE THE RISK OF ELECTRIC
T
SHOCK, DO NO
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
T
O PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
O PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT
ALL
TIMES.
T
O PREVENT ELECTRIC SHOCK, DO NOT USE THIS TELEVISION’S AC PLUG WITH AN EXTENSION CORD,
RE
CEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE
CC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
the F
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
wever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful inter
is encouraged to try to correct the interference by one or more of the following measures:
eorient or relocate the receiving antenna.
the user’
ference to radio or television reception, which can be determined by turning the equipment o and on, the user
ease the separation between the equipment and receiver.
s authority to operate this equipment.
T REMOVE COVER
ound to comply with the limits for a Class B digital device, pursuant to Part 15 of
cuit dierent from that to which the receiver is connected.
xperienced radio/TV technician for help.
xpressly approved by the party responsible for compliance with the FCC Rules could void
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
or ), in accor
dance with FCC rules.
Location of the required Marking
The rating sheet and the safety caution are on
the rear of the unit.
Declar
This de
(1) This device may not cause harmful interference and (2)This device must accept any interference received, including interference that
For questions regarding this declaration, contact:
ation of Conformity
vice complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
may cause undesired operation.
Hitachi America, Ltd.
2420 Fenton Street, Suite 200
Chula Vista, CA 91914-3556
ATTN: Customer Relations
EN 2
NE
C-NATIONAL
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) K
eep these instructions.
3) Heed all w
4) F
ollow all instructions.
5) Do not use this appar
6) Clean only with dr
7) Do not block an
8) Do not install near an
that pr
9) Do not de
one wider than the other
third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Pr
otect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
wher
11) Only use attachments/accessories specied b
12) Use only with car
appar
from tip-over.
13) Unplug this appar
efer all servicing to qualied service personnel. Servicing is required when the apparatus has been
14) R
damaged in an
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
15) Appar
be placed on the appar
16) An outside antenna s
cir
cuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
17) Do not o
18) Do not push objects thr
that could r
of liquid into the unit.
19) If
an outside antenna or cable system is connected to the unit, be sure
the antenna or cable s
against voltage surges and built-up static charges, Section 810 of the
National Electrical Code, ANSI/NFPA 70, provides information with
respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection
to grounding electrodes, and requirements for the grounding
electrode.
20) When r
manuf
Unauthoriz
21) Upon completion of an
determine that the unit is in pr
22) When y
outlet.
equipment carefully and follow the instructions when making any connections.
arnings.
atus near water.
y cloth.
y ventilation openings. Install in accordance with the manufacturer’s instructions.
y heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)
oduce heat.
feat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
. A grounding type plug has two blades and a third grounding prong. The wide blade or the
e they exit from the apparatus.
y the manufacturer.
t, stand, tripod, bracket, or table specied by the manufacturer, or sold with the
atus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
atus during lightning storms or when unused for long periods of time.
y way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
atus should not be exposed to dripping or splashing, and objects lled with liquids, such as vases, should not
atus.
ystem should not be located in the vicinity of overhead power lines or other electric light or power
verload wall outlets and extension cords, as this can result in a risk of re or electric shock.
ough any openings in this unit, as they may touch dangerous voltage points or short out parts
esult in re or electric shock. Never spill or spray any type
ystem is grounded to provide some protection
ELE
CTRIC SERVICE
ELE
CTRICAL CODE
S2898A
EXAMPLE OF ANTENNA GR
NATIONAL ELECTRICAL CODE
GROUND
CLAMP
EQUIPMENT
OUNDING AS PER THE
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHAR
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
eplacement parts are required, be sure the service technician uses replacement parts specied by the
acturer or those that have the same characteristics as the original part.
ed substitutions may result in re, electric shock or other hazards.
y service or repairs to this unit, ask the service technician to perform safety checks to
oper operating condition.
ou connect the product to other equipment, turn o the power and unplug all of the equipment from the wall
Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other
GE UNIT
3 EN
IMPOR
TANT SAFETY INSTRUCTIONS (continued)
23) Do not allo
and r
24) This r
guidelines f
w the product to output distorted sound for an extended period of time. It may cause speaker overheating
e.
eminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC that provides
or proper grounding and, in particular, species that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
25) This appar
26) The mains plug is used as the disconnect and shall r
CONDENS
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature
of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new
surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the
location of the unit.
HOW TO HANDLE THE LCD PANEL
• Do not pr
• If the L
Possible Adverse Eects on LCD Panel: If a xed (non-moving) pattern remains on the LCD Panel for long periods of time, the image
can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT
COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is displaying the following formats or
images:
• Fix
• Special F
CD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your
skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.
ed Images, such as stock tickers, video game patterns, TV station logos, and websites.
bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right
sides of screen).
atus shall be connected to a mains socket outlet with a protective earthing connection.
emain readily operable.
ATION
ess hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.
ormats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsibility for
these symptoms.
CD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be
• L
missing picture elements or have luminous spots.
This is not a sign of a malfunction.
• Do not install the L
unit may cause interference.
• Eect on infr
P
ower source
This tele
To prevent electric shock, do not use the television’s (AC) plug with an extension cord, receptacle, or other outlet unless the blades
can be fully inserted to prevent blade exposure.
Never connect the television to 50 Hz, direct current, or anything other than the specied voltage.
W
T
C
Ne
not operate properly, unplug the television and call your authorized dealer or service center.
Adjust only those controls that are covered in the instructions, as improper changes or modications not expressly approved by
Hitachi could void the user’s warranty.
vision is designed to operate on 120 volts 60 Hz, AC current. Insert the power cord into a 120 volts 60 Hz outlet.
arning
o reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
aution
ver remove the back cover of the television as this can expose you to very high voltages and other hazards. If the television does
CD Panel near electronic equipment that produces electromagnetic waves. Some equipment placed too near this
ared devices – There may be interference while using infrared devices such as infrared cordless headphones.
EN 4
CHILD S
AFETY NOTICE
5 EN
SAFETY PRECAUTIONS
Y(VIDEO)
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block
ventilation holes, or set up near radiators. Do not place in direct sunlight. When placing on a shelf leave 4 inches (10 cm) free space
around the entire unit.
4 inches
4 inches
Notes when mounting the TV on a wall
If the unit is to be mounted on the wall, contact the retailer where you purchased the TV for advice, and have the equipment professionally installed. Incomplete or improper installation may cause injury to you, and/or damage to the TV.
The screws ISO M4 thread type should be used. The insertion length must be within 11- 12.5mm.
If the insertion length is less than 11mm, the weight can not be maintained.
If the insertion length is more than 12.5mm, a space is created between the Wall Mount Bracket and the Television.
(Insertion Length) = (Screw Length) - (Washers Thickness) - (Mounting Bracket Thickness)
Securing to a Wall
1 Use metallic wire, screw and clamp (not provided) on the rear of the TV as shown below.
2 Keep the TV 4 inches away from the wall, except when mounted using the wall mount bracket, and secure to the wall as shown below:
Wire
Clamp
Screw
NOTICE FOR TV CABINET
If the unit is placed on a cabinet smaller than the length of the unit, it could result in instability and the unit may tumble over, making a risk
of personal, possibly fatal injury. Also, this would seriously damage the product. Accordingly, Hitachi accepts no responsibility or liability
for any injuries or property damage resulting from the improper installation.
4 inches
Wire
EN 6
NO !!YES !!
How to attach the stand
NOTE:
• Assure the AC cord is not connected to an AC outlet.
• Before beginning this process, make sure that you have a clean, safe, and cushioned space to work at to avoid any damage to the
unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
1 Carefully place the TV screen face-down on a clean, cushioned surface.
2 Insert and secure the stands (R and L) with 2 screws (supplied) each side as shown in Figure 1.
R
• Be sure to follow the above instructions. Insucient tightening or incorrect installation of the stand will not support your TV correctly,
and could result in damage or injury from tip-over.
L
Stands
L
R
Stands
Screws
Figure 1
How to remove the stand
When you transport this product, remove the stand and pack it at against the back of the unit in the carton. To remove the stand,
perform the above steps in reverse order.
When you mount the TV on the wall, remove both stands (R and L).
To disconnect the stand remove the screws from the bottom of TV.
Screws
7 EN
Loading...