TTE Technology L46FHD2X48, L52FHD2X48 Users Manual
SK2009-03-120R0
72-NP90NA-E001B
\\tclking-hzoa0\ \ \ 3\ \
: , BOM
(BRAND NAME)
B.O.M.
(TO):
(TYPE OF JOB.):
²É¹º²¿
i)
ii)
iii)
(SIZE)
(COLOUR)
iv)
RCA
H7-HM19ARB-TU39W
Ïã¸Û
PMC
Wash Printing
Silk Screen Printing
(SCALE)
²É¹º²¿ ²É¹º²¿ ²É¹º²¿
²¿Æ·²¿IQC
:
1:1
:
216mmX279mm
:
QA
Four-Colour Printing
English IB
For ALL Np90 models
2009-03-26
PE
¹¤³Ì²¿
Spraying Paint
Plastic Colour
Others
TCL
TCL
PREPARED BY
CUSTOMER
CHECKED BY
ODF
ODF DATE:
/
CHECKED BY:
REVIEWED BY:
53
contents
connections 7
remote 20
features 28
menus 34
FAQs 41
warranty 47
user’s guide
|
LCD FLAT PANEL HDTV
For use with models: L42FHD2X48/L46FHD2X48
/L52FHD2X48
Table of contents
1
Important Information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer
servicing to qualified service personnel.
This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.
WARNING
To reduce the risk of fire or electric shock, do
not expose this product to rain or moisture. This
product should not be exposed to dripping or
splashing. No objects filled with liquids, such as
vases, should be placed on the component.
This symbol indicates that this product contains mercury. Special disposal of this product for environmental reasons
may be required under the laws applicable to your jurisdiction. For disposal or recycling information, please contact
your local authorities or the Electronic Industries Alliance: www.eiae.org.
This symbol indicates that this product incorporates double
insulation between hazardous main voltage and user accessible
parts. When servicing, use only identical replacement parts.
This symbol indicates important instructions
accompanying the product.
WARNING
The TV is unstable if it is not properly attached to
the base or mounted to the wall. Please follow
the base or wall mounting instructions provided in
the User’s Guide to ensure your safety.
Refer to the identification/rating label located on the back panel of your product for its proper operating voltage.
FCC regulations state that changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of
the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable
ground should be connected to the grounding system of the building as close to the point of cable entry as practical.
Important: This television is a table model and is designed to sit on a firm, flat surface. Don’t place the TV on soft carpeting or a
similar surface, as the ventilation slots on the bottom of the unit may be blocked, resulting in reduced lifetime from overheating.
To assure adequate ventilation for this product, maintain a spacing of 4 inches from the top and sides of the TV receiver and 2
inches from the rear of the TV receiver and other surfaces.
Also, make sure the surface or stand is of adequate size and strength to prevent the TV from being accidentally tipped over,
pushed off, or pulled off. This could cause personal injury and/or damage to the TV. Refer to the Important Safety Instructions
on the next page.
The power button (followed by the power symbol) on this TV and your remote control puts the TV into a very low-power
standby mode but will not completely shut the power off. In order to shut the power off, you will need to disconnect the
power cord from your outlet. Therefore, you should make sure the TV is installed in a way that allows you to disconnect the
power cord when desired.
Product Registration
Please fill out the product registration card (packed separately) and return it immediately. For US customers: Your RCA
Consumer Electronics product may also be registered at www.rca.com/television. Registering this product allows us to
contact you if needed.
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial
and model numbers in case you need them. These numbers are located on the product.
Model No. ___________________________ Serial No.______________________ Purchase Date __________________
Dealer/Address/Phone ______________________________________________________________________________
Important Safety Instructions
1. Read and follow all instructions.
2. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
3. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
4. Do not negate the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the
obsolete outlet.
5. Protect the power cord from being walked on or pinched particularly at plugs, receptacles, and the point where it exits
from the component.
6. Do not use this component near water.
7. Only use the attachments/accessories specified by the manufacturer.
8. Clean only with dry cloth.
9. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the component. When
the TV is placed on a cart, use caution when moving the cart to avoid injury from tip-over.
10. Unplug this component during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Service is required when the component is damaged in any way, such as
power supply cord or plug damage, liquid spilled on or objects falling onto the component, rain or moisture exposure,
abnormal operation, or if the component has been dropped.
12. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical
Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of
grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode. See following example:
ELECTRIC SERVICE
EQUIPMENT
ANTENNA
LEAD IN
WIRE
GROUND CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PARTH)
Table of Contents
Important Safety Instructions ..................................................................................................................... i
Chapter 1 I Connections & Setup
Before Initial Setup .......................................................................................................................... 7
Protect Against Power Surges............................................................................................................ 7
Safety Information .............................................................................................................................. 7
Avoid Audio Interference .................................................................................................................... 7
Avoid Direct Light ............................................................................................................................... 7
Check Supplied Parts ........................................................................................................................ 7
Removing the Table Stand .............................................................................................................. 8
Mounting Your TV to the Wall .......................................................................................................... 8
Obtain the Signal.............................................................................................................................. 9
What You Need .................................................................................................................................. 9
What you Need to Know ....................................................................................................................9
Choose Your Connections .............................................................................................................. 10
Connecting a Component with Composite Video (Good) ..................................................... 11
Connecting a Component with Component Video (Better) .................................................. 11
Connecting a Component with HDMI (Best) ........................................................................ 12
Connecting a PC Component ............................................................................................. 13
Viewing the Picture from the Connected Component ..........................................................14
Viewing a PC....................................................................................................................... 14
Plug in the TV .................................................................................................................................. 15
Put Batteries in the Remote ........................................................................................................... 15
Turn on the TV .................................................................................................................................15
Using the Remote Control to Complete Initial Setup ....................................................................15
Complete the Initial Setup .............................................................................................................. 16
Set the Menu Language ....................................................................................................................16
Set the TV Location Mode ................................................................................................................. 16
Complete Channel Setup .................................................................................................................. 16
What To Expect ...............................................................................................................................17
Waching TV-Analog Channels ........................................................................................................... 17
Waching TV-Digital Channels............................................................................................................. 17
Changing Channels ........................................................................................................................... 17
4 Table of Contents
Explanation of Jacks (in alphabetical order).................................................................................. 18
Buttons and Other Jacks on Your TV ............................................................................................. 19
Side Input Jacks ............................................................................................................................... 19
Side Panel Buttons............................................................................................................................ 19
Chapter 2 I Using the Remote Control
Remote Control Buttons................................................................................................................. 20
TV Functions ..................................................................................................................................... 20
INPUT Button .................................................................................................................................... 21
Programming the Remote to Operate Other Components ........................................................... 21
Determine If You Need to Program Remote .................................................................................. 21
Programming the Remote .............................................................................................................. 22
Using Direct Entry ........................................................................................................................... 22
Using a Manual Code Search ......................................................................................................... 22
Using Automatic Code Search ....................................................................................................... 22
Using the Remote ........................................................................................................................... 23
Modes of Operation ........................................................................................................................ 23
Manual Reset .................................................................................................................................. 23
Remote Code List ........................................................................................................................... 24
Chapter 3 I Using TV Features
Channel Banner .............................................................................................................................. 28
Autotuning ....................................................................................................................................... 28
Parental Controls and V-Chip ........................................................................................................ 29
V-Chip - US and Canada................................................................................................................... 29
Lock Parental Controls...................................................................................................................... 30
Unlock Parental Controls .................................................................................................................. 30
V-Chip Rating Screen ....................................................................................................................... 30
US V-Chip TV Ratings ....................................................................................................................... 30
Blocking Specific Content Themes .................................................................................................... 31
US V-Chip Movie Rating Limit ........................................................................................................... 31
Blocking Canada V-Chip Ratings ...................................................................................................... 32
Block Channel .................................................................................................................................. 32
Block Buttons ................................................................................................................................... 32
Blocking Unrated/Exempt Programs ................................................................................................. 32
Future Rating Region ........................................................................................................................ 32
Additional Features......................................................................................................................... 33
Fetch Feature............................................................................................................................................ 33
Screen Formats ................................................................................................................................ 33
Table of Contents 5
Chapter 4 I Using the TV Menu
Using the Menu System ................................................................................................................. 34
Sound Menu .................................................................................................................................... 34
Picture Menu ................................................................................................................................... 35
Channel List Menu .......................................................................................................................... 37
Setup Menu ..................................................................................................................................... 37
Parental Control Menu.................................................................................................................... 39
Time Menu....................................................................................................................................... 39
USB Menu ....................................................................................................................................... 40
USB Connection ............................................................................................................................. 40
Chapter 5 I Other Information
Frequently Asked Questions (FAQs) .............................................................................................. 41
Troubleshooting .............................................................................................................................. 42
V-Chip Rating Explanations ........................................................................................................... 45
US V-Chip Rating System ................................................................................................................. 45
Canadian English V-Chip Rating System...........................................................................................45
Canadian French V-Chip Rating System ........................................................................................... 46
Limited Warranty............................................................................................................................. 47
Care and Cleaning .......................................................................................................................... 51
6 Table of Contents
1 Connections and Setup
Before Initial Setup
Protect Against Power Surges
• Connect all components before you plug any power cords into the wall outlet or power strip.
NEVER plug your TV into an outlet that is controlled by a wall switch.
•Turn off the TV before you connect or disconnect any cables.
•Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions.
Safety Information
•Protect components from overheating.
•
Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely.
• Don’t stack components.
• If you place the component in a stand, make sure you allow adequate ventilation.
• If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t harm
other components.
Avoid Audio Interference
• Position cables properly; insert each cable firmly into the designated jack.
• If you place components above the TV, route all cables down one side of the back of the TV instead of
straight down the middle.
• If your antenna uses 300-ohm twin lead cables, do not coil the cables.
• Keep twin lead cables away from audio/video cables.
Avoid Direct Light
Don’t place the TV where sunlight or room lighting is directed toward the screen. Use soft or indirect lighting.
Check Supplied Parts
Check that the following parts were packed with your product.
2 AA BATTERIES
REMOTE CONTROL
PART # RC2254705/01
Graphics contained within this publication are presentation only.
POWER CORD
CABLE MANAGE-
MENT STRAP
STAND CAP
Connections and Setup Chapter 1 7
Replacing your remote
If you need to replace
your remote, call
1-800-338-0376. A
shipping and handling
fee, and the appropriate
sales tax, will be
charged upon ordering.
Have your Visa,
MasterCard, or Discover
Card ready.
Removing Table Stand
Your TV comes with the table stand attached. If you want to mount your TV to the wall, remove the table
stand by following the instructions below:
3
Caution: Your wall
mount must be able to
bear a minimum of five
times the TV’s net
weight to avoid
causing damage.
Step 1
1. Take the TV bag and place it on a flat table.
2. Take the TV set and place it face down on
the TV bag.
Step 3
Attach the Stand Cap to the TV cabinet .
Step 2
Remove the Table Stand from the TV cabinet by
taking off the three size M6 St-screws with a
screwdriver. (Note: there are four M5 St-screws
for models L46FHD2X48 & L52FHD2X48)
TV cabinet with Stand Cap attached.
Mounting Your TV to the Wall
To mount your TV to the wall, purchase a VESA wall mount
Models L42FHD2X48
/L46FHD2X48/L52FHD2X48
The VESA number is the horizontal and vertical measurement of the mounting holes. For example,
600x400 refers to fact that the mounting measurements are 600mm horizontally and 400mm vertically.
Follow the directions included with the wall mount to mount the TV to the wall.
Purchase a VESA 600 x400, M6 screw
8 Chapter 1 Connections and Setup
Obtain the Signal
The first step in connecting your TV is obtaining the signal. The back panel of your TV allows you to receive
analog and/or digital channels by using the ANTENNA/CABLE INPUT.
Before you connect your TV, you have to determine whether you will be using an antenna or a cable service
to obtain the signal.
What You Need
Antenna (Rabbit Ears) or Outdoor Antenna with Coaxial Cable
Plug the antenna or coaxial cable from the wall outlet into the ANTENNA/CABLE INPUT on the back of the
TV. You are ready to receive off-air local digital and analog channels.
Cable Service
Plug the coaxial cable from the wall outlet into the ANTENNA/CABLE INPUT on the back of the TV. You are
ready to receive your cable channels.
Set-Top Box
If you have a set-top box, you may need to call your cable company or satellite service provider. They may
recommend special cables to allow you to view digital channels.
What You Need to Know
•Visit www.antennaweb.org for help in deciding what type of antenna to use in order to receive the local
digital channels available to you. Enter your location, and the program will list local analog and digital
stations available using your antenna.
• When you watch TV, the Channel Banner displays the type of channel currently viewed. A “D” at the bottom
of the screen denotes digital channels and an “A” denotes analog channels. For more information on
Channel Banners, see page 28.
OR
COAXIAL CABLE OUTDOOR OR INDOOR ANTENNA
Connections and Setup Chapter 1 9
Choose Your Connections
Note for US
Customers: If you
prefer, we can provide
you with the name of
an Authorized Service
Representative who
will, for a fee, install
your electronic
entertainment system
and instruct you in its
operation.
For details about this
service, call
1-888-206-3359.
There are several ways to connect components, such as DVD players and setup boxes, to your TV. Please
use the following chart to determine which connections are best for you. Proceed to the appropriate pages
to connect your components.
Jacks Used Cable Needed Go to...
page 11
Audio R and L Video
Y Pb Pr
Audio R and L
1
HDMI/DVI
Audio R and L
Component Video Audio
HDMI
Audio/Video
TM
HDMI
TM
+ HDMI/DVI Adapter +ORAudio
pages 11-12
pages 12-13
VGA
pages 13-14
VGAAudio
Audio
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Input Signal Compatability
Ant/Cable 480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats)
Composite Video 480i
S-Video 480i
Component Video 480i, 480p, 720p/60Hz, 1080i/60Hz
PC VGA, SVGA, XGA
HDMI 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p
Customer Support
For additional assistance in using your RCA product, please visit www.rca.com/customersupport.
10 Chapter 1 Connections and Setup
Connecting a Component with Composite Video (Good)
To connect a component with a video output jack, such as a DVD player, follow these steps:
Example: DVD Player
1. Connect your cable and/or off-air antenna as described on page 9.
2. Connect the video cable to the (VID 2) VIDEO jack on the side of the TV and to the video output jack on
the DVD player.
3. Connect the red and white audio cables to the (VID 2) right and left audio jacks on the side of the TV and
to the audio output jacks on the DVD player.
Composite Video Connection
This is an example of a connection using the composite video jack.
Red
Yellow
White
Don’t forget:
If necessary, connect
antenna or cable to get
a picture. Go to page 9
for instructions.
COMPOSITE CABLES ARE COLOR
CODED-YELLOW=VIDEO
RED=RIGHT AUDIO; WHITE=LEFT AUDIO
Connecting a Component with Component Video (Better)
To connect a component that has Y Pb Pr jacks, such as a DVD player, follow these steps:
Example: DVD Player
1. Connect your cable and/or off-air antenna as described on page 9.
2. Connect three video cables or special Y Pb Pr cables to the COMPONENT INPUT (CMPT) Y Pb Pr jacks
on the back of the TV and to the Y Pb Pr outputs on the DVD player.
3. Connect your red and white audio cables to the COMPONENT INPUT (CMPT) right and left AUDIO jacks
on the back of the TV and to the audio output jacks on the DVD player.
Connections and Setup Chapter 1 11
Component Video Connection
This is an example of a connection using the component video
jacks. Go to page 11 for specific instructions.
Green
Red
Blue
Don’t forget:
If necessary, connect
antenna or cable to get
a picture. Go to page 9
for instructions.
COMPONENT VIDEO CABLES
(Y Pb Pr) ARE COLOR CODED-
GREEN, BLUE AND RED
Red
White
AUDIO CABLES ARE COLOR
CODED - RED= RIGHT AUDIO,
WHITE=LEFT AUDIO
Connecting a Component with HDMI (Best)
High-Definition Multimedia Interface (HDMI) technology is an uncompressed digital connection that carries
both video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on
Digital Visual Interface (DVI), the jack on the back of your TV is also compatible with components that have a
DVI output jack.
Example: Set-top box with HDMI jack:
1. Connect an HDMI cable to the HDMI/DVI INPUT 1 jack on the back (or the HDMI INPUT 2/HDMI INPUT 3
jacks on the back or HDMI INPUT 4 on the side panel of the TV) and to the HDMI output jack on the back
of the set-top box.
Example: Set-top box with DVI jack
To connect an HDMI cable and an HDMI/DVI adapter:
1. Connect an HDMI cable to the HDMI/DVI INPUT 1 jack on the back of the TV.
2. Attach an HDMI/DVI adapter to the end of the HDMI cable; then connect the adapter to the DVI output
jack on the set-top box.
3. Since you’re using an HDMI/DVI adapter, you need to connect separate audio cables to the DVI AUDIO
INPUT right and left jacks on the back of the TV and to the right and left audio jacks on the back of the
set-top box.
12 Chapter 1 Connections and Setup
HDMI/DVI Connection (Best)
This is an example of a connection using the HDMI/DVI INPUT 1 jack. Go to page 12 for
specific instructions.
AUDIO
PC INPUT
VIDEO
Don’t forget:
If necessary, connect
antenna or cable to get
a picture. Go to page 9
for instructions.
Red
White
HDMI Cable
OR
HDMI Cable + HDMI/DVI Adapter +
Audio cables are color coded
Red=right audio; white=left audio
Connecting a PC Component
To connect a personal computer and use your TV as a monitor, follow these steps:
1. Connect your cable and/or off-air antenna as described on page 9.
2. Connect one end of a 15-pin monitor cable to the PC VIDEO jack on the TV and the other end to the
PC's video output jack.
Note: If your PC's video output isn't 15-pin, you'll need an adapter that can connect to a 15-pin monitor cable.
3. Connect a 3.5mm stereo mini-pin audio cable (sometimes referred to as 1/8" stereo mini-pin) to the PC
AUDIO jack on the back of the TV and the other end to the audio output jack on the PC.
Note: The maximum
resolution is
1024x768. Be sure to
set your PC monitor
setting accordingly.
Connections and Setup Chapter 1 13
Don’t forget:
If necessary, connect
antenna or cable to get
a picture. Go to page 9
for instructions.
PC Connection
This is an example of a connection using the PC VIDEO jack. Go to page 13 for specific
instructions.
AUDIO
PC INPUT
VIDEO
Viewing the Picture from the Connected Component
1. Plug in the TV (see page 15 for details) and the component, such as a DVD player or a VCR.
2. Turn on the TV and the component you want to view.
3. Repeatedly press the INPUT button on the remote control to select VID 1 (if connected to the AUDIO/
VIDEO INPUT 1 jacks), CMPT (if connected to the COMPONENT INPUT jacks) or HDMI1 (if connected to
the HDMI/DVI INPUT 1 jack) displayed at the top left of the TV screen. To return to viewing TV channels,
use the number buttons to enter the channel you wish to view.
Note: If the picture from the DVD player appears black and white and your component is connected to the VIDEO
INPUT, you may be tuned to the wrong input. Make sure you press INPUT until you select VID 1, CMPT or HDMI 1
displayed at the top left of the TV screen.
Note: When you have connected all additional components to your TV, go to page 16 for initial setup instructions.
Viewing a PC
1. Plug in the TV and the computer.
2. Turn on the TV and the computer.
3. Repeatedly press the INPUT button on the remote control until you select PC displayed at the top left of
the TV screen. To go back to viewing TV channels, use the digit keys to enter the channel or press CH+
or CH- buttons continuously.
Note: When you have connected all additional components to your TV, go to page 16 for initial Setup Instructions.
14 Chapter 1 Connections and Setup
Plug in the TV
Plug the end of the power cord into the back of the TV. Plug the other end into an outlet, inserting the plug
completely. Do not plug the TV into an outlet controlled by a light switch.
Put Batteries in the Remote
• Remove the battery compartment cover from the back of the remote control by pushing the tab and lifting
off the cover.
• Insert 2 AA batteries, making sure the polarities (+ and -) are aligned correctly.
• Replace the cover.
Turn on the TV
Turn on your TV by pressing the Power button ( ) on the side of the TV or the ON•OFF button on the
remote control.
Using the Remote Control to Complete Initial Setup
You will need to use the remote control to complete the setup of your TV. The remote control allows you to
navigate through and select items that appear in the on-screen menus. The process works the same on all
menu screens: highlight your choice and select it.
To select a menu item, press the arrows to highlight one of the items listed on the screen. Use the up or
down arrows to move up or down. Use the right or left arrow to view other selections for a menu choice or
to display a sub-menu.
Note: Highlighted
items stand out from
other menu items on
the list (appear darker,
brighter, or a different
color).
Connections and Setup Chapter 1
15
Loading...