TTE Technology L26HD31R Users Manual

contents

connections 6

remote 19

features 20

menus 25

FAQs 30

warranty 36

user’s guide

LCD FLAT PANEL HDTV

For use with models: L22HD41/L26HD41/L26HD31R

L32HD41/L32HD31R

Table of contents

Important Information

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury.

WARNING

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the component.

This symbol indicates that this product contains mercury. Special disposal of this product for environmental reasons may be required under the laws applicable to your jurisdiction. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org.

This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts.

This symbol indicates important instructions accompanying the product.

WARNING

The TV is unstable if it is not properly attached to the base or mounted to the wall. Please follow the base or wall mounting instructions provided in

the User’s Guide to ensure your safety.

Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC regulations state that changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical. Important: This television is a table model and is designed to sit on a firm, flat surface. Don’t place the TV on soft carpeting or a similar surface, as the ventilation slots on the bottom of the unit may be blocked, resulting in reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 4 inches from the top and sides of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces. Also, make sure the surface or stand is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the TV. Refer to the Important Safety Instructions on the next page. There is not any indication to show the stand-by mode for this apparatus, but in the mode of stand-by, the apparatus is still connected to the mains. Unplug the power cord set is the only way to make this apparatus be completely disconnected from the mains.

Product Registration

Please fill out the product registration card (packed separately) and return it immediately. For US customers: Your RCA Consumer Electronics product may also be registered at www.rca.com/television. Registering this product allows us to contact you if needed.

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product.

Model No. ___________________________ Serial No.______________________ Purchase Date __________________ Dealer/Address/Phone ______________________________________________________________________________

Important Safety Instructions

1. Read and follow all instructions.

2. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

3. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

4. Do not negate the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.

5. Protect the power cord from being walked on or pinched particularly at plugs, receptacles, and the point where it exits from the component.

6. Do not use this component near water.

7. Only use the attachments/accessories specified by the manufacturer.

8. Clean only with dry cloth.

9. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the component. When the TV is placed on a cart, use caution when moving the cart to avoid injury from tip-over.

10. Unplug this component during lightning storms or when unused for long periods of time.

11. Refer all servicing to qualified service personnel. Service is required when the component is damaged in any way, such as power supply cord or plug damage, liquid spilled on or objects falling onto the component, rain or moisture exposure, abnormal operation, or if the component has been dropped.

12. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See following example:

ELECTRIC SERVICE EQUIPMENT

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PARTH)

Table of Contents

Important Information................................................................................................................................. i

Important Safety Instructions ...................................................................................................................... i

Chapter 1 I Connections and Setup

Before Initial Setup .......................................................................................................................... 6

Protect Against Power Surges............................................................................................................ 6

Safety Information .............................................................................................................................. 6

Avoid Audio Interference .................................................................................................................... 6

Avoid Direct Light ............................................................................................................................... 6

Check Supplied Parts ........................................................................................................................ 6

Removing the Table Stand .............................................................................................................. 7

Mounting Your TV to the Wall .......................................................................................................... 7

Obtain the Signal.............................................................................................................................. 8

What You Need .................................................................................................................................. 8

What You Need to Know .................................................................................................................... 8

Choose Your Connections ............................................................................................................... 9

Connecting a Component with Composite Video (Good) ................................................................... 10

Connecting a Component with Component Video (Better) ................................................................ 10

Connecting a Component with HDMI (Best) ...................................................................................... 11

Connecting a PC Component ........................................................................................................... 12

Viewing the Picture from the Connected Component ........................................................................ 13

Viewing a PC..................................................................................................................................... 13

Plug in the TV .................................................................................................................................. 14

Put Batteries in the Remote ........................................................................................................... 14

Turn on the TV ................................................................................................................................. 14

Using the Remote Control to Complete Initial Setup .................................................................... 14

Complete the Initial Setup .............................................................................................................. 15

Set the Menu Language .................................................................................................................... 15

Set the TV Location Mode ................................................................................................................. 15

Complete Channel Setup .................................................................................................................. 15

What To Expect ............................................................................................................................... 16

Watching TV- Analog Channels ......................................................................................................... 16

Watching TV – Digital Channels ......................................................................................................... 16

Changing Channels ........................................................................................................................... 16

Explanation of Jacks (in alphabetical order).................................................................................. 17

Buttons and Other Jacks on Your TV ............................................................................................. 18

Side Input Jacks ............................................................................................................................... 18

Side Panel Buttons............................................................................................................................ 18

4 Table of Contens

Chapter 2 I Using the Remote Control

Remote Control Buttons ................................................................................................................. 19

Chapter 3 I Using TV Features

Channel Banner............................................................................................................................... 20

Parental Controls and V-Chip ......................................................................................................... 20

V-Chip – US and Canada .................................................................................................................. 20

Create Password .............................................................................................................................. 21

Lock/Unlock Parental Controls .......................................................................................................... 21

V-Chip Rating Screen ........................................................................................................................ 21

US V-Chip TV Ratings ....................................................................................................................... 22

Blocking Specific Content Themes .................................................................................................... 22

US V-Chip Movie Rating Limit ........................................................................................................... 23

Blocking Canada V-Chip Ratings....................................................................................................... 23

Reset Downloadable Data ................................................................................................................. 23

Blocking Unrated/Exempt Programs ................................................................................................. 23

Block Channel ................................................................................................................................... 23

Block Buttons ................................................................................................................................... 24

Change Password............................................................................................................................. 24

Additional Features ......................................................................................................................... 24

Screen Formats................................................................................................................................. 24

Chapter 4 I Using the TV Menu

Using the Menu System .................................................................................................................. 25

Picture Menu ................................................................................................................................... 25

Sound Menu .................................................................................................................................... 26

Setup Menu ..................................................................................................................................... 27

List & Labels Menu ......................................................................................................................... 29

Parental Control Menu .................................................................................................................... 29

Chapter 5 I Other Information

Frequently Asked Questions (FAQs) .............................................................................................. 30

Troubleshooting .............................................................................................................................. 31

V-Chip Rating Explanations............................................................................................................ 34

US V-Chip Rating System ................................................................................................................. 34

Canadian English V-Chip Rating System ...........................................................................................34

Canadian French V-Chip Rating System ............................................................................................35

Limited Warranty ............................................................................................................................. 36

Care and Cleaning .......................................................................................................................... 39

Table of Contens 5

1 Connections and Setup

Before Initial Setup

Protect Against Power Surges

• Connect all components before you plug any power cords into the wall outlet or power strip. NEVER plug your TV into an outlet that is controlled by a wall switch.

•Turn off the TV before you connect or disconnect any cables.

•Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions.

Safety Information

•Protect components from overheating.

•

Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely.

• Don’t stack components.

• If you place the component in a stand, make sure you allow adequate ventilation.

• If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t harm

other components.

Avoid Audio Interference

•Position cables properly; insert each cable firmly into the designated jack.

• If you place components above the TV, route all cables down one side of the back of the TV instead of

straight down the middle.

• If your antenna uses 300-ohm twin lead cables, do not coil the cables.

• Keep twin lead cables away from audio/video cables.

Avoid Direct Light

Don’t place the TV where sunlight or room lighting is directed toward the screen. Use soft or indirect lighting.

Check Supplied Parts

Check that the following parts were packed with your product.

Replacing your remote

If you need to replace

your remote, call

1-800-338-0376. A

shipping and handling

fee, and the appropriate

sales tax, will be charged

upon ordering. Have

your Visa, MasterCard,

or Discover Card ready.

6 Chapter 1 Connections and Setup

RC246

REMOTE CONTROL

PAR T # RC2463001/01

2 AAA BATTERIES

POWER CORD

only for models L26HD41/

L26HD31R

ST-SCREW

only for models L22HD41

/L32HD31R/L32HD41

STAND CAP

Graphics contained within this publication are presentation only.

STAND CAP

CABLE MANAGE-

MENT STRAP

Removing the Table Stand

Your TV comes with the table stand attached. If you want to mount your TV to the wall, remove the table stand by following the instructions below.

Step 1

Place the plastic bag off the TV and place it on a table or other flat surface. Place the TV set face down on the TV bag.

Step 3 (Only for models L22HD41/L32HD31R

/L32HD41)

Attach the stand cap to the TV cabinet.

Step 2

Remove the table stand from the TV cabinet. Use a screwdriver to remove the three M5 ST-screws. (Note: there are five M4 ST-screws for models L26HD41

/L26HD31R, and four M4 ST-screws for model L22HD41)

Step 3 (Only for model L26HD41 /L26HD31R)

Attach the stand cap to the TV cabinet using a M3 ST-screw and a screwdriver.

TV cabinet with stand cap attached.

Mounting Your TV to the Wall

To mount your TV to the wall, purchase a VESA wall

Models L22HD41/L26HD41/L26HD31R

Models L32HD41/L32HD31R

The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 200x100 refers to fact that the mounting measurements are 200mm horizontally and 100mm vertically. Follow the directions included with the wall mount to mount the TV to the wall.

Purchase a VESA 100 x100, Size M4 screw

Purchase a VESA 200 x100, Size M4 screw

Connections and Setup Chapter 1 7

Caution:

mount must be able to

bear a minimum of five

times the TV’s net

weight to avoid causing

damage.

Your wall

Obtain the Signal

The first step in connecting your TV is obtaining the signal. The back panel of your TV allows you to receive

analog and/or digital channels by using the ANTENNA/CABLE INPUT.

Before you connect your TV, you have to determine whether you will be using an antenna or a cable service

to obtain the signal.

What You Need

Antenna (Rabbit Ears) or Outdoor Antenna with Coaxial Cable

Plug the antenna or coaxial cable from the wall outlet into the ANTENNA/CABLE INPUT on the back of the

TV. You are ready to receive off-air local digital and analog channels.

Cable Service

Plug the coaxial cable from the wall outlet into the ANTENNA/CABLE INPUT on the back of the TV. You are

ready to receive your cable channels.

Set-Top Box

If you have a set-top box, you may need to call your cable company or satellite service provider. They may

recommend special cables to allow you to view digital channels.

What You Need to Know

•Visit www.antennaweb.org for help in deciding what type of antenna to use in order to receive the local

digital channels available to you. Enter your location, and the program will list local analog and digital

stations available using your antenna.

• When you watch TV, the Channel Banner displays the type of channel currently viewed. A “D” at the bottom

of the screen denotes digital channels and an “A” denotes analog channels. For more information on

Channel Banners, see page 20.

COAXIAL CABLE OUTDOOR OR INDOOR ANTENNA

8 Chapter 1 Connections and Setup

Choose Your Connections

There are several ways to connect components, such as DVD players and setup boxes, to your TV. Please use the following chart to determine which connections are best for you. Proceed to the appropriate pages to connect your components.

Jacks Used Cable Needed Go to...

page 10

Audio R and L Video

Audio R and L Y Pb Pr

Component Video Audio

Audio/Video

HDMI

pages 10-11

pages 11-12

Home Installation Note for US Customers: If you

prefer, we can provide

you with the name of an

Authorized Service

Representative who will,

for a fee, install your

electronic entertainment

system and instruct you

in its operation.

For details about this

service, call

1-888-206-3359.

Audio R and L HDMI/DVI

HDMI

+ HDMI/DVI Adapter +ORAudio

VGA

pages 12-13

VGAAudio

Audio

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

Input Signal Compatability

Ant/Cable 480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats)

Composite Video 480i

S-Video 480i

Component Video 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p

PC VGA, SVGA, XGA

Customer Support

For additional assistance

in using your RCA

product, please visit

www.rca.com/ customersupport.

HDMI 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz

Connections and Setup Chapter 1 9

Connecting a Component with Composite Video (Good)

To connect a component with a video output jack, such as a DVD player, follow these steps: Example: DVD Player

1. Connect the yellow video cable to the (VID 2) VIDEO jack on the side of the TV and to the video output jack on the DVD player.

2. Connect the red and white audio cables to the (VID 2) right and left audio jacks on the side of the TV and to the audio output jacks on the DVD player.

Composite Video Connection

This is an example of a connection using the composite video jack.

AUDIO/VIDEO INPUT2 (VID2)

Don’t forget:

If necessary, connect

antenna or cable to get

a picture. Go to page 8

for instructions.

Red

Yellow

White

COMPOSITE VIDEO CABLES ARE COLOR

CODED-YELLOW=VIDEO

RED=RIGHT AUDIO; WHITE=LEFT AUDIO

Connecting a Component with Component Video (Better)

To connect a component that has Y Pb Pr jacks, such as a DVD player, follow these steps:

Example: DVD Player

1. Connect three video cables or special Y Pb Pr cables to the COMPONENT INPUT (CMPT) Y Pb Pr

jacks on the back of the TV and to the Y Pb Pr outputs on the DVD player.

2. Connect your red and white audio cables to the COMPONENT INPUT (CMPT) right and left AUDIO

jacks on the back of the TV and to the audio output jacks on the DVD player.

10 Chapter 1 Connections and Setup

Component Video Connection

This is an example of a connection using the component video jacks. Go to page 10 for specific

instructions.

CMPT

Don’t forget:

If necessary, connect

antenna or cable to get

a picture. Go to page 8

for instructions.

Red

White

AUDIO CABLES ARE COLOR

CODED - RED= RIGHT AUDIO,

WHITE=LEFT AUDIO

COMPONENT VIDEO CABLES

(Y Pb Pr) ARE COLOR CODED-

GREEN, BLUE AND RED

Green

Red

Blue

Connecting a Component with HDMI (Best)

High-Definition Multimedia Interface (HDMI) technology is an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI), the jack on the back of your TV is also compatible with components that have a DVI output jack.

Example: Set-top box with HDMI jack:

1. Connect an HDMI cable to the HDMI INPUT 2 jack or the HDMI/DVI INPUT 1 jack on the back of the TV and to the HDMI output jack on the back of the set-top box.

Example: Set-top box with DVI jack:

To connect an HDMI cable and an HDMI/DVI adapter:

1. Connect an HDMI cable to the HDMI/DVI INPUT 1 jack on the back of the TV.

2. Attach an HDMI/DVI adapter to the end of the HDMI cable; then connect the adapter to the DVI output jack on the set-top box.

3. Since you’re using an HDMI/DVI adapter, you need to connect separate audio cables to the DVI AUDIO INPUT right and left DVI AUDIO jacks on the back of the TV and to the right and left audio jacks on the back of the set-top box.

Connections and Setup Chapter 1 11

Don’t forget:

If necessary, connect

antenna or cable to get

a picture. Go to page 8

for instructions.

HDMI/DVI Connection (Best)

This is an example of a connection using the HDMI/DVI INPUT 1 jack. Go to page 11 for specific instructions.

HDMI/DVI INPUT 1

AUDIO

PC INPUT

VIDEO

Red

White

HDMI Cable

HDMI Cable + HDMI/DVI Adapter +

Audio cables are color coded Red=right audio; white=left audio

Connecting a PC Component

To connect a personal computer and use your TV as a monitor, follow these steps:

1. Connect one end of a 15-pin monitor cable to the PC VIDEO jack on the TV and the other end to the PC's video output jack.

Note: If your PC's video output isn't 15-pin, you'll need an adapter that can connect to a 15-pin monitor cable.

2. Connect a 3.5mm stereo mini-pin audio cable (sometimes referred to as 1/8" stereo mini-pin) to the PC AUDIO jack on the back of the TV and the other end to the audio output jack on the PC.

12 Chapter 1 Connections and Setup

+ 28 hidden pages