Tt eSport X COMFORT AIR, X FIT, GT FIT Installation Manual
INSTALLATION GUIDE
ACCESSORIES
Please make sure the angle of the adjuster on the seat base is set at 90 degrees (As shown in )Attention
STEP by STEP
1.Install the caster wheels, gas lift piston and
piston covers onto the 5-star base.
Please note: when installing the caster
wheels, hold the wheels at a 90-degree
with a firm grip of the hand; and do not
use tools to knock it into place or the
ground as to prevent damage.
2.Mount the Z-support mechanism
underneath the seat base using 4x M8
screws. Please note: The screws for the
mechanism have been tightened
underneath the seat base and need to
be removed and reattached via the
provided allen key upon mechanism
placement.
3.Attach the 5-star base with gas list piston
onto the notch of the Z-support mechanism that has now been attached to the
seat base.
4.Install the seat back onto the seat base.
5.Take out the 2x M8 screws from each side
of the seat back with the allen key and
align with seat base. Reinsert M8 screws
and tighten with allen key.6.Attaching the
side covers. Keep the hole sites of the
side covers aligned with the M8 screws of
the seat back; and then slowly, but firmly
press to fix the side covers. Please note:
to prevent accidental damage, do not
bang it into place with force.
www.ttesports.com
Seat Back x 1 Seat Base x 1 Mechanism x 1
Five-star base x 1 Caster wheels x 5
Gas lift piston x 1
Piston cover x 1
Side Cover x 2 Allen key x 1 M8 screw x 8
Pre-mounted
INSTALLATION GUIDE
1.SEAT BACKREST ADJUSTMENT 2.ADJUSTMENT OF ARMRESTS
3.SEAT HEIGHT ADJUSTMENT
For your safety, do not lift up your feet
whilst lying flat on the chair.
Attention
1.Max load : GT FIT/X FIT-120kg/264.55lb, GT COMFORT/ X COMFORT - 150kg/330.69lb
2. Do not use chair for other purposes other than originally intended by the manufacturer.
3. During installation, it is recommended that a soft covering is placed on the floor to prevent any accidental
damage to it during the setup process.
4. Chair is designed for flat surface use.
5. Product is for single person use.
6. Do not place near flammables for risk of catching fire.
7. To prevent damage, keep away from direct sunlight.
8. Do not dismantle parts outside of original installation procedures.
9. Use a soft dry cloth for general cleaning and maintenance of the chair.
10. For harder to remove stains, use a soaked cloth with mild detergent and gently wipe the affected area. After that,
wipe it again with a dry cloth.
For your safety, do not push your head back on the
headrest area whilst lying flat on the chair.
www.ttesports.com
Backward of seat backrest: lift up the
handle and adjust it to the most
comfortable angle.
Retract the backrest: pull the handle
upwards, lean against the seat back
gently and it automatically goes back.
Lift up the armrest: press button
under it and then pull up the armrest.
Lower the armrest: press button
under it and then lower down the
armrest leftwards and rightwards.
Press button and pull the armrest
leftwards and rightwards.
Press button and pull the armrest
frontwards and backwards.
Lower the seat: sit down on the seat
and lift up the right handle, seat will
lower down automatically. (refer to
picture )
Lift the seat: stand up and pull up the
right handle, it goes back automatically. (refer to picture )
Lock back posture: pull the left handle
downwards. (refer to picture )
Unlock back posture: pull the left
handle upwards. (refer to picture )
Loading...