查询OVSR9RBCR8供应商
Red Side-Emitting SMD LED
(4 x 4 mm, 120° Viewing Angle)
OVSR9RBCR8
x Compact size allows use in space conscious devices
x Thin profile offers unlimited design flexibility
x Long life span reduces maintenance cost
x Suitable for all SMT assembly methods
x Red (624 nm)
The OVSR9RBCR8 is a is a side-looking red 4.0 mm x 4.0 mm 120° angle surface-mounted LED that can be used
as a light source in many applications. Its compact size and thin profile offer maximum design flexibility, while its
long life span reduces maintenance cost.
Applications
x Optical indicators
x Coupling into light guides
x Back lights (LCD switches, keys, displays, illuminated advertising, general lighting)
x Interior automotive lighting (dashboard backlighting, etc.)
x Automotive applications
x Marker lights (e.g., steps, exit ways, etc.)
x Signal and symbol luminaire
Product Photo Here
Part Number Material Emitted Color Intensity Typ. mcd
OVSR9RBCR8
Moisture
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
AlGalnP Red 400
Lens Color
Water Clear
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 10/05
Page 1 of 4
Red Side-Emitting SMD LED
OVSR9RBCR8
Absolute Maximum Ratings
TA = 25o C unless otherwise noted
Storage Temperature Range -40 ~ +100° C
Operating Temperature Range -40 ~ +100° C
Junction Temperature 110° C
Junction/Ambient1 500° C/W
Junction/Solder Point 350° C/W
Reverse Voltage 5 V
Continuous Forward Current 50 mA
Peak Forward Current (10% Duty Cycle, PW VHF 200 mA
Power Dissipation 130 mW
Note:
1. Rth test condition: Mounted on PC board FR 4 (pad size
Electrical Characteristics
TA = 25o C unless otherwise noted
SYMBOL
PARAMETER MIN TYP MAX UNITS CONDITIONS
2
).
I
Luminous Intensity 280 400 ---- mcd I
V
V
Forward Voltage ---- 2.3 2.6 V I
F
I
Reverse Current ---- ---- 10 µA V
R
Dominant Wavelength 620 628 635 nm I
D
2 ½ 50% Power Angle ---- 120 ---- deg I
Standard Bins (I
= 20mA)
F
Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown.
Orders for OVSR9RBCR8 may be filled with any or all bins contained as below.
560
450 U1
355 T2
(mcd)
280 T1
Luminous Intensity
620 628
Dominant Wavelength (nm)
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
= 20 mA
F
= 20 mA
F
= 5 V
R
= 20 mA
F
= 20 mA
F
Luminous intensity is at
T1 bin or above.
Issue A 10/05
Page 2 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Red Side-Emitting SMD LED
OVSR9RBCR8
Typical Electro-Optical Characteristics Curves
100.0
VR
-60 -50 -40 -30 -20 -10
0.0
80.0
60.0
mA
40.0
20.0
0.0
2.0 2.2 2.4 2.6 2.8 3.0
V
Forward Current vs Forward Voltage
500
400
300
%
200
100
0
0 20 40 60 80 100
mA
Relative Luminous Intensity vs Forward Current
-10.0
-20.0
mA
-30.0
-40.0
-50.0
Reverse Current vs Reverse Voltage
Half Power WL = 23 nm
100
75
%
50
25
0
400 500 600 700 800
nm
Relative Luminous Intensity vs Wavelength
50% Power Angle: 120°
50% Power Angle: 120°
100
80
60
mA
40
20
0
0 20 40 60 80 100
°C
Maximum Forward Current vs Ambient
-90 -60 -30 0 30 60
Far Field Pattern
Temperature
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
100
80
60
%
40
20
0
90
°C
Issue A 10/05
Page 3 of 4
Red Side-Emitting SMD LED
OVSR9RBCR8
Reel Dimensions: 7-inch reel
Carrier Tape Dimensions: Loaded quantity 500 pieces per reel
Moisture Resistant Packaging
Label Aluminum Moisture-proof Bag Desiccant Bar Code Label
Issue A 10/05
Page 4 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Loading...