TT electronics OVSR9ABCR8 Technical data

查询OVSR9ABCR8供应商

Amber Side-Emitting SMD LED

(4 x 4 mm, 120° Viewing Angle)

OVSR9ABCR8

x Compact size allows use in space conscious devices
x Thin profile offers unlimited design flexibility
x Long life span reduces maintenance cost
x Suitable for all SMT assembly methods
x Amber (591 nm)

The OVSR9ABCR8 is a side-looking amber 4.0 mm x 4.0 mm 120° surface-mounted LED that can be used as a
light source in many applications. Its compact size and thin profile offer maximum design flexibility, while its long
life span reduces maintenance cost.

Applications

x Optical indicators
x Coupling into light guides
x Back lights (LCD switches, keys, displays, illuminated advertising, general lighting)
x Interior automotive lighting (dashboard backlighting, etc.)
x Automobile applications
x Marker lights (e.g., steps, exit ways, etc.)
x Signal and symbol luminaire

Product Photo Here

Part Number Material Emitted Color Intensity Typ. mcd

OVSR9ABCR8

Moisture

RoHS

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

AlInGaP Amber 350

Lens Color

Water Clear

DO NOT LOOK DIRECTLY

AT LED WITH UNSHIELDED

EYES OR DAMAGE TO

RETINA MAY OCCUR.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Issue A 10/05

Page 1 of 4

Amber Side-Emitting SMD LED

OVSR9ABCR8

Absolute Maximum Ratings

TA = 25o C unless otherwise noted

Storage Temperature Range -40 ~ +100° C

Operating Temperature Range -40 ~ +100° C

Junction Temperature 110° C

Junction/Ambient1 500° C/W

Junction/Solder Point 350° C/W

Reverse Voltage 5 V
Continuous Forward Current 50 mA
Peak Forward Current (10% Duty Cycle, PW VHF 200 mA
Power Dissipation 130 mW

Note:

1. Rth test condition: Mounted on PCBoard FR 4 (pad size

Electrical Characteristics

TA = 25o C unless otherwise noted

SYMBOL

PARAMETER MIN TYP MAX UNITS CONDITIONS



2

).

I

Luminous Intensity 224 350 ---- mcd I

V

V

Forward Voltage ---- 2.3 2.6 V I

F

I

Reverse Current ---- ---- 10 µA V

R

Dominant Wavelength 584 591 596 nm IF = 20 mA

D

2 ½ 50% Power Angle ---- 120 ---- deg I

Standard Bins (I

= 20mA)

F

Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown.
Orders for OVSR9ABCR8 may be filled with any or all bins contained as below.

560

450 U1

355 T2

(mcd)

280 T1

224 S2

Luminous Intensity

584 596

Dominant Wavelength (nm)

Notes:

1. All ranks will be included per delivery. Rank ratio will be based on the chip distribution.

2. To designate luminous intensity ranks, please contact OPTEK.

= 20 mA

F

= 20 mA

F

= 5 V

R

= 20 mA

F

Luminous intensity is at
S2 bin or above.

Issue A 10/05
Page 2 of 4

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com