TT electronics OVLGY0C6B9, OVLGY0C7B9, OVLGY0C8B9, OVLGY0C9B9 Technical data

High-Intensity Yellow LED in Plastic
T-1¾ Package

OVLGY0CxB9

x Narrow Beam Angle
x High Luminous Intensity
x Water Clear Plastic Package
x Yellow (589nm)

The OVLGY0CxB9 is a high intensity AlInGaP LED mounted in a clear plastic T-1¾ package. The device incorpo­rates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed
to produce light over a wide range of drive currents, this LED is useful in applications requiring higher on-axis
brightness than that achievable with standard lamps.

Applications

x Indoor/Outdoor Applications
x Message Boards
x Store Front Signage
x Indicators

Product Photo Here

Part Number Material Emitted Color Intensity Typ. mcd Lens Color

OVLGY0C6B9
OVLGY0C7B9
OVLGY0C8B9
OVLGY0C9B9

AlInGaP Yellow

10000
12500
16000
20000

Water Clear

RoHS

1 ANODE 2 CATHODE

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Issue 1.0 0505

Page 1

T-1¾ High-Intensity Yellow LED

OVLGY0CxB9

Absolute Maximum Ratings

TA = 25oC unless otherwise noted

Storage Temperature Range -40 ~ +100 °C

Operating Temperature Range -40 ~ +85 °C
Reverse Voltage 5 V
Continuous Forward Current2 50 mA
Peak Forward Current (10% Duty Cycle, 1KHz) 100 mA
Power Dissipation 120 mW
Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 260 °C

2000 V Electrostatic Discharge

Note:

1. Solder time less than 5 seconds at temperature extreme.

Electrical Characteristics

TA = 25oC unless otherwise noted

SYMBOL

PARAMETER

MIN TYP MAX UNITS CONDITIONS

x = 6 6300 10000 ----

7 8000 12500 ----

I

Luminous Intensity

v

8 10000 16000 ----

mcd

IF = 20mA

9 12500 20000 ----

V

Forward Voltage ---- 2.0 2.4 V I

F

I

Reverse Current ---- ---- 10 µA V

R

Peak Wavelength ---- 591 ---- nm IF = 20mA

P

Dominant Wavelength ---- 589 ---- nm IF = 20mA

D

= 20mA

F

= 5V

R

2 ½H-H 50% Power Angle ---- 6 ---- deg IF = 20mA

Issue 1.0 0505
Page 2

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006