TT electronics OVLBB4C7, OVLBG4C7, OVLBR4C7, OVLBY4C7 Technical data

Round Through-Hole LED Lamp
(3 mm)

OVLBx4C7 Series

• High brightness with well-defined spatial radiation patterns

• UV-resistant epoxy lens

• Choice of blue, green, red or yellow

• No stand-offs

Each OVLBx4C7 series device is a high-intensity LED mounted in a clear plastic T-1 package. The LED provides

a well-defined and even emission pattern. Its UV-resistant epoxy lens makes this device an optimal solution for
outdoor applications.

Applications

• Pedestrian signals

• Signage and architectural lighting

• Backlighting

• Automotive

• Outdoor/indoor displays

Part Number Material Emitted Color Intensity Typ. mcd

InGaN Blue 900

InGaN Green 2000 Water Clear

AllnGaP Red 1800 Water Clear

AllnGaP Yellow 2400 Water Clear

[MILLIMETERS]

DIMENSIONS ARE IN:

INCHES

RoHS

OVLBB4C7

OVLBG4C7

OVLBR4C7

OVLBY4C7

Moisture

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Lens Color

Water Clear

DO NOT LOOK DIRECTLY

AT LED WITH UNSHIELDED

EYES OR DAMAGE TO

RETINA MAY OCCUR.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Issue A .1 07/06

Page 1 of 9

Round Through-Hole LED (3 mm)

OVLBx4C7 Series

Absolute Maximum Ratings

TA = 25o C unless otherwise noted

Storage Temperature Range -40 ~ +100 °C

Operating Temperature Range -40 ~ +85 °C

Reverse Voltage 5 V

Continuous Forward Current

Peak Forward Current (10% Duty Cycle, 1 kHz)

Power Dissipation

Current Linearity vs Ambient Temperature

LED Junction Temperature

Lead Soldering Temperature (3 mm from the base of the epoxy bulb)

Note:

1. Solder time less than 5 seconds at temperature extreme.

1

260° C

Blue, Green 20 mA

Yellow

Red,

Blue, Green 50 mA

Yellow

Red,

Blue, Green 80 mW

Red, Yellow

Blue, Green -0.2 mA/° C

Red, Yellow

30 mA

100 mA

78 mW

-0.5 mA/° C

125° C

Electrical Characteristics

TA = 25o C unless otherwise noted

SYMBOL

I

Luminous Intensity

V

V

Forward Voltage

F

I

Reverse Current

R

λ

Peak Wavelength

P

λ

Dominant Wavelength

D

2Θ½H-H 50% Power Angle ---- 45 ---- deg I

PARAMETER COLOR MIN TYP MAX UNITS CONDITIONS

Blue

Green

Red

Yellow

Blue

Green

Red

Yellow

Blue

Green

Red

Yellow

Blue

Green

Red

Yellow

Blue

Green

Red

Yellow

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

525 900 ----

1285 2000 ----

1135 1800 ----

1440 2400 ----

---- 3.4 4.0

---- 3.4 4.0

---- 2.2 2.6

---- 2.2 2.6

---- ---- 50

---- ---- 50

---- ---- 10

---- ---- 10

---- 466 ----

---- 521 ----

---- 633 ----

---- 593 ----

465 470 475

519 525 531

619 623 630

585 589 595

mcd

V IF = 20 mA

µA VR = 5 V

nm IF = 20 mA

nm IF = 20 mA

IF = 20 mA

= 20 mA

F

Issue A .1 07/06
Page 2 of 9

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Round Through-Hole LED (3 mm)

OVLBx4C7 Series

Standard Bins (I

Lamps are sorted to luminous intensity (I

= 20 mA)

F

) and dominant wavelength (λD) bins shown.

V

Orders may be filled with any or all bins contained as below.

OVLBB4C7 (BLUE)

1440
1025

735

(mcd)

525

Luminous Intensity

Forward Voltage (VF)

Rank H J K L

Voltage 2.6–3.0 3.0–3.3 3.3–3.6 3.6–4.0

Forward Voltage (VF)

Rank H J K L

Voltage 2.6–3.0 3.0–3.3 3.3–3.6 3.6–4.0

465 470 475

3530
2520
1800
1285

Luminous Intensity

519

Dominant Wavelength (nm)

OVLBG

6T
6S

4C7 (GREEN)

523

Dominant Wavelength (nm)

BM BJ

7R
7Q
7P

Luminous intensity is
at 7P bin or above.

F7 F5 F6

527 531

6U

Luminous intensity is
at 6S bin or above.

OVLBR

3115
2225
1590

(mcd)

1135

Luminous Intensity

619 626 630 623

Dominant Wavelength (nm)

4C7 (RED)

R3 R1 R2

0U
0T
0S

Forward Voltage

Rank G H J 6

Voltage 1.8–2.0 2.0–2.2 2.2–2.4 2.4–2.6

Important Notes:

1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.

2. To designate luminous intensity ranks, please contact OPTEK.

3. Pb content <1000 PPM.

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Luminous intensity is
at 0S bin or above.

Issue A .1 07/06

Page 3 of 9