ttaf PowerPort Installation Manual

Tel: [phone]

www.pow er-port.co m

Istanbu l Caddesi Kava kli Koyu,No. 21,Buyukce kmece,lsta nbul 34520,T urkey

TTAF Electronic Company Limited

3+5 Port Surge Protector Power Board

PowerPort

Description

The PowerPort is an energy conserving device that automatically detects power
consumption and turn off connected electrical appliances to save standby power
consumption. The PowerPort device is the best choice to help you make the energy
efficient, easy to save money and protect the environment for future generations. The
built-in surge protector inside this device will protect your valuable electrical
equipments from voltage spikes. The EMI/RFI noise filtration eliminates interference
from other electrical devices to improve the performance of connected electrical
appliances. This product does not have a power switch; it is powered on when the power
cord is plugged in and it receives the turn-on control signal from remote.

Features

• Energy Saving Progr am

Product design is to meet energy efficiency and energy saving goals.

• IR Remote Control

Use your own IR remote control to turn on this PowerPort.

• Loading Current Dis play

The digital display to show current consumption status.

• Automatically Shu t Down

The PowerPort will automatically detect current consumption of connected electrical
appliances. It shuts down the power of switched outlets once these connected
electrical appliances turn into standby model or reach the factory setting of power
saving level.

• Power Surge Protect ion

Protects your electrical equipments from voltage spikes.

• EMI/RFI Noise Filtr ation

Eliminates the interference and increases the performance of electrical appliance

• LED Indication

There are three LED to indicate device status (AC Power,Surge Protection, and IR
Status.LEDs to indicate device status - AC Power, Surge Protection, and IR Status.

IR receiver

IR can control the voltage/current/power

IR Control indicator

When the Indicator Light is on,It
means the Grounded Outlets are power on.

LED Display

LED Display shows
the voltage/current/power

Power indicator

If the Power Indicator Light is on It means
the PowerPort is at surge protection mode.

3+5 Port Surge Protector Power Board

Surge Protected High Current Outlets

These outlets provides continuous
power to the device that you plugged in.

Surge Protected Smart Outlets

When the energy consumption of the devices that plugged these
smart outlets decrease as %70 of total consumption The PowerPort
detects this energy consumption decrease and automatically turn itself off.

Surge Protected TV Antenna Ports

The PowerPort also protects your Satellite Receivers
and TVs from surges that can caused by TV Antenna Cable.
The PowerPort has two TV Antenna Set as 1 Input and 1 Output.

RJ45&RJ11 Ports

RJ45&RJ11 Ports are used to protect your PC,
Telephone,DSL Modems and Fax Machine from
surges can caused off voltage picks through
Telephone Line and Internet Line.

USB Ports

You can use USB Ports to charge your
Smartphones,Tablets and USB Powered Devices.

3+5 Port Surge Protector Power Board

PowerPort

Reset Button
If the circuit overload over than
16A the PowerPort turn off.And
by pressing this reset button you
can turn the PowerPort on.

3+5 Port Surge Protector Power Board

PowerPort