Page 1
ENGINE DRIVEN PETROL
TD Series
TD
DIAPHRAGM - TRASH
The TD series are automatic priming, diaphragm pumps powered by OHV Honda petrol engines
(with oil alert). They are tted with nitrile rubber diaphragms, so priming is unnecessary and
indenite dry running is permissible. They can handle site water containing sand, silt and solids
up to 30mm. The inlet and outlet ports, pump casings and surge reduction chambers are all
constructed from aluminium. The rubber diaphragm and check valves are replaceable for easy
on site repair, while the gear unit is maintenance free and is grease lled during factory assembly.
Each model has a protective tubular steel, easy carry, frame with anti-vibration rubber mounts.
A site trolley is available as an optional extra. All models are supplied with a suction strainer, hose
couplings, washers and clips, but hoses are extra. A quick release cam coupling kit, with heavy
duty hose clamps, is an optional extra for operator convenience. Maximum suction lift is 8 metres,
however 6 metres, or less, is recommended. This popular series of pumps is widely used by utilities
and regularly found on hire eets.
A dual fuel LPG conversion kit will enable a Honda engine driven pump (tted with GX120,
GX160, GX240 or GX340) to run on a propane cylinder bottle, but with the option to switch back
to petrol if required. Using gas reduces running costs and lowers emissions without any loss of
performance. Gas also avoids the problems caused by stale fuel in an engine left unused for long
periods and the hazards of petrol storage and refueling. Supplied in kit form, with step-by-step
instructions, they are easy to t without any special tools.
●
Hire fleets
●
Construction
●
Utilities
●
Drainage
●
Waste removal
●
Submerged litter
Speed - 3600 rpm
TD200 with trolley
Quick release coupling kit
TD300
inlet
model
TD200 50 50 GX120 petrol 4 yes 120 17 610x620x510 30 39 42 1,245.00 3
TD300 80 80 GX160 petrol 5.5 yes 240 18 740x660x510 30 46 52 1,495.00 3
optional extra: 50mm quick release coupling kit (2 x Part C, 2 x Part A, 3 x hose clamps) 1.4 2.4 28.00 3
optional extra: 80mm quick release coupling kit (2 x Part C, 2 x Part A, 3 x hose clamps) 2.4 3.4 43.00 3
optional extra: site trolley (TD200 & TD300) 12.4 12.4 180.00 3
LPG gas conversion kit 2.0 2.2 172.00 3
(mm)
outlet
(mm)
engine fuel HP oil alert
LPG conversion kit
flow
(l/min)
head
(mtrs)
w x l x h
(mm)
solids
(mm)
dry weight
(kgs)
packing weight
(kgs)
Price
(£)
code
155
Loading...