Page 1
SUBMERSIBLE PROJECT DEWATERING
KTVE
3 PHASE AUTO
The KTVE pumps offer an automatic option to the KTV series, without the need for external
control panels and cumbersome oat switches. A sensor probe is mounted in a durable, moulded
rubber bracket and, for added protection, it is positioned within the footprint of the pump base.
Once the water level reaches the probe, the pump will start and continue to operate for one
minute after the water falls below it. However, if the water level touches the probe within this
time, the “stop” signal is cancelled and the pump continues to run until the water is cleared.
All models are supplied with 20 metres of heavy duty rubber power cable, except the 0.75kW
models which are supplied with 10 metres. All models are supplied with a threaded outlet and
a hose connector. IDS (individually screened cable) is available, at an extra cost, on 3.7kW and
5.5kW models, for quarry and mining applications.
●
Mines & quarries
●
Construction
●
Hire fleets
●
Tunneling
●
Industry
●
Processing
KTVE22.2
model
KTVE2.75 A 2" & 50 0.75 400 320 15 6 Ø200x417 204 65 12.70 18.20 1,039.00 1
KTVE21.5 A 2" & 50 1.5 400 425 20 8.5 Ø240x486 235 80 22.00 28.30 1,588.00 1
KTVE22.2 A 2" & 50 2.2 400 525 24 8.5 Ø240x486 235 80 25.00 30.75 1,746.00 1
KTVE33.7 A 3" & 80 3.7 400 830 26 8.5 Ø285x585 297 90 40.00 46.90 2,499.00 1
KTVE35.5 A 3" & 80 5.5 400 980 35 8.5 Ø300x620 327 90 52.00 65.00 3,111.00 1
Manual
or Auto
outlet
(BSPM & mm)
kW volt
flow
(l/min)
head
(mtrs)
free passage
(mm)
dia x h
(mm)
on level
(mm)
off level
(mm)
dry weight
(kgs)
packing weight
(kgs)
Price
(£)
code
33
Loading...