Page 1
Digital voice recorder
Edic-mini Plus A32
Operation Manual
Page 2
Description
Digital recorder Edic-mini Plus A32 - 300h is a professional device intended for making
high quality record of voice messages into built-in flash memory. The recorder can be
used simultaneously both as a voice recorder and a flash drive to store and transfer data
of any s tandards .
Functional Characteristics
• Plastic case;
• VAS (Voic e Ac ti vat ion S ys t em);
• Circular and Li near Record Modes;
• Built-in real time clock;
• Timer s to start recording at the pr eset tim e;
• Indication of B attery C harge Level and Free Memory C apacit y.
Supplied software is located in the built-in memory of the
Recorder and makes it possible to:
• Save t he recorded messages on the PC as standard sound files (WAV);
• Restore compressed pauses when uploading files onto the dr ive;
• Set th e Recorder’s parameters;
• Apply password protection of th e access t o the recorder’s settings and
information;
• Update software.
• Randomly delete records.
Page 3
The main components of the device and control layout:
Technical Characteristics
Battery life in record mode (8 kHz, without compression) . . . . . . . . . . . . up to 30 hours;
Battery life in Stand-by Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . up to 5 months;
Battery life in VAS Mode (audio signal below threshold) . . . . . . . . . . . . . up to 120 hours;
Last digits in the model's name specify recording duration in hours (built-in memory
Connector for USB adapter
Rec-Stop button
(Mode)
Service buttons
RESET button
LEDs
Microphone
Page 4
capacity) for the Mode: 8 kHz, and compression 2-bit ADPCM):
300h. . . . . 300 hours . . . . . 2 Gb
600h. . . . . 600 hours . . . . . 4 Gb
1200h. . . . 1200 hours . . . . 8 Gb
2400h. . . . 2400 h ours . . . . 16 Gb
Exchange rate (USB 1.1 Interface) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . up to 1,5 Mb/s
Frequ ency band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0,7-6 kHz
Signal-to-noise r atio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 dB
Built-in microphone sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9 m
Battery type, capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 mAh
Operating temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0÷40 ºС
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52х24x11 mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 g
Operat ing lifetime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 years
PC system requirements: operational systems Windows
XP, Windows Vista, Windows7, 8.
Recorder's Functional Testing
Recording. To start recording, make sure the device is in Stand-by Mode. Press the Rec
button twice - after a series of flashes, the Recorder starts recording, with red LED
flashing. The Recorder continues recording till it switches to Stand-by Mode back again
by double pressing the R ec button.
To pause recording, press the Rec button once - recording will be paused, and the red
LED starts flashing more frequently. To resume recording, press the Rec button again recording will continu e and red LED flashing mode will be res tored.
Page 5
Connection to the PC. Go to www.ts-market.com
> Recorders > Edic-mini Pro A32 >
Product files and download, then unzip RecManager file to set the Recorder's parameters
and operate the recorded files (Version 1.0.28). It is also necessary to install CDM20824
driver for FTDI232 adapter's microcircuit.
Connect the adapter to the PC, second connector to the Recorder. If the Recorder's
rechargeable battery is not fully charged, red LED will indicate charging process. To
switch from charging to transfer mode, keep the Mode button (on the Recorder being
connected to the PC) pressed until blue LED starts flashing. Then run RecManager for
EM-LCD program and make sure connection interface is USB 1.1, for that, select
Recorder - Connecti on Type - Adapter USB 1.1.
In Box
1. Rec order
2. USB-S PI adapter
3. Short Operating Instruction
4. Warranty
5. Packa ge Box
Technical Support
Technical support is available by e-mail: support@ts-market.com. We are constantly
working to improve the software and documentation. You can always download the
latest version of the software for free and get information on products on our website:
http://www.ts-market.com.
Loading...