TS line TS010, TS050, TS040, TS020 Operating Instructions Manual

2

Index

IndexIndex

Index

TECHNICAL SPECIFICATIONS 4

MECHANICAL MOUNTING 4

ELECTRICAL CONNECTIONS 5

TERMINAL BOARD DESCRIPTION 5

CONNECTION WITH EXTERNALLY POWERED ENCODER 6

CONNECTION WITH SELF-POWERED HALL SENSOR 6

OUTPUTS CONNECTION WITH NPN LOGIC 6

AC OUTPUTS CONNECTION 6

USE 7

KEYBOARD DESCRIPTION 7

SETUP PROCEDURE 7

WORKING PARAMETERS SETTING 9

WORKING DIAGRAM 10

ERROR MESSAGES 11

WARRANTY 11

3

This device allows you to monitor speed of axis motion and to compare this
value to two setpoints you can pre-program according to your needs. Every
setup setting and work parameter are stored in EEPROM module to guarantee
reliability and working assurance.

This manual provides all the necessary information for a correct installation and use of this device; it is strictly
recommended to read carefully the following instructions.

Entity Elettronica does not assume any responsibility for injuries or damages for persons or things deriving from non­compliance with the instructions in this manual; It does not assume any responsibility for eventual inaccuracy and
reserves the right to modify partially or totally the device features and documentation.

Technical data in this manual include a tolerance of +/- 10%.

Version Changes Date of changes

0 New Operating Manual; October 1997

1 Aesthetic and text changes; March 2001

2 New keyboard images; text structure remake. November 2002

4

TECHNICAL SPECIFICAT

TECHNICAL SPECIFICATTECHNICAL SPECIFICAT

TECHNICAL SPECIFICATIONS

IONSIONS

IONS

Electrical Specifications

Power supply

24 – 115 – 230 Vac +/- 10%
50/60Hz

Power consumption 5 VA

Output power supply 12 Vdc 60 mA +/- 5%

Step frequency 1 MHz
Electromagnetic

immunity

In accordance with EN 50082-2

Electromagnetic
emissions

In accordance with EN 50081-2

Memory EEPROM

Display

6 digit h=14mm
+ 1 digit h=8mm

Mechanical Specifications

Container

Self-extinguishing plastic

DIN 48 x 96 x 124 mm
Container protection
degree

IP20

Front panel protection
degree

IP62 (device mounted on a panel)

Weight 370 gr

Keyboard

Vetronite covered with Scratch-resistant

polycarbonate
Operating Temperature 0÷40 °C
Transport and storage

temperature

-25 ÷ +70 °C

Operating Humidity 90%

MECHANICAL MOUNTING

MECHANICAL MOUNTINGMECHANICAL MOUNTING

MECHANICAL MOUNTING

This device container has been designed for panel mounting: make an hole as described in the picture at the bottom of
the page, insert the device and fix it with provided brackets.
Avoid to place the instrument in wet and dirty areas. Be sure that the device slot is not subjected to vibrations and big
temperature variations.
Install the device as far as possible from electromagnetic disturbances to avoid bad device working.

frontal view

side view

back view

mounting hole dimensions