T & S Brass & Bronze Works B-1200 Installation Manual

Installation and

Maintenance

Limited One Year Warranty

T&S warrants to the original purchaser (other
than for purposes of resale) that such product
is free from defects in material and workman­ship for a period of one (1) year from the date
of purchase. During this one-year warranty
period, if the product is found to be defective,
T&S shall, at its options, repair and/or replace
it. To obtain warranty service, products must
be returned to…

T&S Brass and Bronze Works, Inc.
Attn: Warranty Repair Department

2 Saddleback Cove

Travelers Rest, SC 29690

Shipping, freight, insurance, and other
transportation charges of the product to T&S
and the return of repaired or replaced product
to the purchaser are the responsibility of the
purchaser. Repair and/or replacement shall be
made within a reasonable time after receipt by
T&S of the returned product. This warranty does
not cover Items which have received secondary
fi nishing or have been altered or modifi ed after
purchase, or for defects caused by physical
abuse to or misuse of the product, or shipment
of the products.

Any express warranty not provided herein,
and any remedy for Breach of Contract which
might arise, is hereby excluded and disclaimed.
Any implied warranties of merchantability or
fi tness for a particular purpose are limited to
one year in duration. Under no circumstances
shall T&S be liable for loss of use or any special
consequential costs, expenses or damages.

Some states do not allow limitations on
how long and implied warranty lasts or the
exclusion or limitation of incidental or conse­quential damages, so the above limitations or
exclusions may not apply to you. Specifi c rights
under this warranty and other rights vary from
state to state.

Instructions

B-1200 Series

Push-Back Glass
Fillers

Deutsch: Installations- und

Wartungsanleitungen

Español: la Instalación y las

Instrucciones de Man­tenimiento

P/N: 098-003148-45 Rev.2
Date: 04-24-98
Drawn: CW
Checked: MVW 06-10-98
Approved: MAB 06-10-98

Français: les Instructions

d’Installation et
d’Entretien

14

15

Exploded View

B-1202

22

7

8

23

24

25

26

19

18

10

11

10

12

9

B-1200
B-1202
B-1206

20

27

B-1210

21

B-1200
B-1206

28

29

30

31

16

17

1

2

3

4

5

6

13

* Some items are listed for instructional purposes

and may not be sold as separate parts.

Part Number Guide

Glass Filler Assemblies

Asm, Glass Filler (B-1200 thru B-1210)
1
2
3
4
5
6
7
8
9

10
11
12
13
14
15
16
17
18
19
20
21

22
23
24
25
26

27
28
29
30
31

Asm, Body - Glass Filler & Pin
Washer
Tip, Glass Filler
Screw, Handle
Nut, Handle
Lever Arm, Blue Lexan
Nut, Volume Control
Stem, Volume Control
Washer, Volume Control
Washer, Bonnet
Packing Stem
Spring
Pushbutton
Hexcap
O-Ring
Asm, Stem

Holder, Seat Washer
Stem

Washer, Seat
Flange (B-1200, B-1202, B-1206)
Locknut (B-1200, B-1206)

(Items 22 thru 26 used on B-1202 model)

Nipple
Locknut
Washer
Tailpiece
Coupling Nut

(Items 27 thru 27 used on B-1210 model)

Pedestal Cube
Pedestal - 8”
Flange
Washer, Pedistal
Locknut

*
001030-45
003090-45
003199-45
003198-45
001145-45
000714-25
000834-25
001031-45
000974-45
001100-45
000894-45
000752-25
000623-40
001062-45
*
000664-20
000826-20
001094-45
000023-40
000713-20

000379-20
000716-20
001032-45
000852-20
000715-20

*
000425-40
000024-40
001033-45
002954-45