Our EC-3100 deck-mounted or EC-3101 back splash-mounted
models allow you to specify any T&S rigid gooseneck you require
Our new EC-HARDWIRE and EC-EASYWIRE allow you to gang up
to eight ChekPoint faucets while using only one power supply
Our NEW EC-3119A and EC3119B Electronic Faucets have
internal above deck electronics for ease of installation
Our NEW EC-3106 Electronic Faucet has a unique dual mode
feature allowing for either electronic or manual operation
EC-3100
Deckmounted
gooseneck
EC-3101
Back splash-
mounted
gooseneck
EC-3102
Deckmounted
cast spout
ChekPoint Faucets – Reliable By Design
Standard Features
• Hands-free washing greatly
reduces risk of contamination
• Sensor-operated faucets
conserve water
• Water-resistant circuit control module
• Each model comes with the convenience of electric plug-in (AC)
and battery (DC) power options
• ADA-compliant
• Adjustable temperature control mixing valve
• Proven electronic technology
• Adjustable automatic time-out feature
• Adjustable water shut-off delay
• Chrome plated brass
• Troubleshooting LED indicator lights
• Scratch-resistant sensor lens
• Filtered solenoid valve with serviceable strainer filter
• Modular quick-release sensor connections
• Low battery indicator light
• Pre-assembled with appropriate mounting hardware included
• Vandal-resistant aerators (2.2 GPM)
• Check valves for cross-flow prevention in all models
• Requires no sealants for easy installation
* Standard ChekPoint under deck electronic components are not
compatible with these models
EC-3103
Deck-mounted
cast spout
EC-3106
Deck-
mounted
cast spout
NEW!
EC-3119A*
Above deck
electronics
deck-mounted
cast spout
EC-3119B*
Above deck
electronics
deck-mounted
cast spout and
side mount
temperature
control
NEW!
NEW!
Page 3
ChekPoint Faucet Gooseneck Options
For EC-3100 and EC-3101 models:
• Choice of any T&S Rigid Gooseneck on EC-3100 and
EC-3101 faucet body models
For example: Specify an EC-3100-LN with a 130X rigid
gooseneck
Note: The sensor range may not equal the spread of larger
goosenecks and requires consideration when installing
1
3
2
4
6
9
8
7
5
ChekPoint EC- faucets.
ChekPoint Faucet Components
These parts are included with all models:
1 Vandal-resistant Aerator Key
2 Installation tool – Tee Wrench (except EC-3101)
3 Faucet Body with sensor connection(plugged into
Control Module; EC-3101 faucet body shown)
4 Stainless Steel Braided Water Hose
5 Hot and Cold Stainless Steel Braided Water Hoses
with standard adjustable Mixing Valve(Thermostatic
Mixing Valve is optional)
6 Water resistant Control Module(with door open to show
standard DC battery)
7 Plug-in wall transformer (AC) is also standard
8 Mechanical Mixing Valve
9 EC-HYDROGEN Hydro-generator (-HG option, or retrofit to
existing ChekPoint by ordering EC-HYDROGEN)
NEW! ChekPoint Faucets Ganging Option
Gang-install up to eight faucets to one power
supply:
Our EC-HARDWIRE and EC-EASYWIRE installation
options allow you to gang-install multiple ChekPoint
models (up to eight) using only one power supply
Options include:
• EC-HARDWIRE – Electronic AC transformer to hardwire
up to eight (8) electronic ChekPoint faucets to a single
power supply
• EC-EASYWIRE – 100-240 VAC Plug-in transformer
allows up to eight (8) electronic ChekPoint faucets to be
ganged to a single power jack on the ChekPoint sensor
faucet control module (requires one EC-EASY WIRE4CC connector
per faucet)
• EC-EASYWIRE4CC – 4’ connector cables for EasyWire
AC transformer connections in a daisy chain circuit
(one EC-EASYWIRE4CC needed for each additional faucet in chain)
• EC-EASYWIRE5EXT – 5’ extension cables when
additional cable length is needed for connections
NEW!
EC-3119B
ChekPoint faucet
with flexible supplies
and side temperature
control
Page 4
1
ChekPoint Electronic Faucets
Typical Installation
Installation is simple with ChekPoint faucets:
1 Mount faucet (deck or wall mount)
2 Mount controller to wall below sink
3 Connect supply lines
4 Connect sensor cable from faucet to controller
Choose your power options:
5 Mount and attach EC-HYDROGEN hydro-generator
3
4
2
7
5
6
(-HG models only)
6Four ‘AA’ batteries (D/C, included)
7Electric plug-in wall transformer (AC, included)
How To Specify A ChekPoint Option
Add any of the following suffixes to your ChekPoint
faucet model number:
-HG Hydro-generator option
-LN Less nozzle option
(EC-3100 and EC-3101 faucet bodies)
-SM Side mount option
-SMT Side mount with thermostatic mixing
valve option
-TMVBelow deck thermostatic mixing valve option
-LF05 Laminar flow option, 0.5 GPM
-LF22 Laminar flow option, 2.2 GPM
Other Technical Data
Consult the T&S Brass “Installation and
Maintenance Instructions for ChekPoint Faucets”
booklet for a complete guide to installing and
maintaining your faucet.
Replacement Parts
A full range of replacement and repair parts
are available for ChekPoint faucets with a list
in the ChekPoint “Installation and Maintenance Instructions” booklet.
Limited One Year Warranty
T&S warrants ChekPoint faucets to be free from
defects in material and workmanship for a
period of one (1) year from the date of purchase.
Packaging For the ChekPoint
Electronic Faucet
All components are
clearly packaged for
ease of assembly.