Installation and
Limited One Year Warranty
(Commercial Applications)
T&S warrants to the original purchaser (other
than for purposes of resale) that such product is
free from defects in material and workmanship for
a period of one (1) year from the date of purchase.
During this one-year warranty period, if the product
is found to be defective, T&S shall, at its options,
repair and/or replace it. To obtain warranty service,
products must be returned to...
T&S Brass and Bronze Works, Inc.
Attn: Warranty Repair Department
2 Saddleback Cove
Travelers Rest, SC 29690
Shipping, freight, insurance, and other
transportation charges of the product to T&S and
the return of repaired or replaced product to the
purchaser are the responsibility of the purchaser.
Repair and/or replacement shall be made within
a reasonable time after receipt by T&S of the
returned product. This warranty does not cover
Items which have received secondary fi nishing or
have been altered or modifi ed after purchase, or
for defects caused by physical abuse to or misuse
of the product, or shipment of the products.
Any express warranty not provided herein, and
any remedy for Breach of Contract which might
arise, is hereby excluded and disclaimed. Any
implied warranties of merchantability or fi tness
for a particular purpose are limited to one year in
duration. Under no circumstances shall T&S be
liable for loss of use or any special consequential
costs, expenses or damages.
Some states do not allow limitations on how
long and implied warranty lasts or the exclusion or
limitation of incidental or consequential damages,
so the above limitations or exclusions may not
apply to you. Specifi c rights under this warranty
and other rights vary from state to state.
Attention California Residents:
WARNING This product can expose
you to chemicals including Lead, Chromium
(hexavalent compounds) and Phthalates
(DEHP) which are known to the State of
California to cause cancer and birth defects or
other reproductive harm.
For more information go to
www.P65Warnings.ca.gov.
P/N: 098-011027-45 Rev.12
Date: 10-09-19
Drawn: TED
Checked: JRM 11-11-19
Approved: JHB 02-14-20
Maintenance
Instructions
PRE-RINSE SPRAY VALVE
B-0107
B-0107-035
B-0107-090
B-10K
B-10K-C
B-10K-J
B-0107-C
B-0107-C35
B-0107-C90
B-0107-J
B-0107-J90
Español:
Instrucciones de instalación y mantenimiento
Français:
Instructions pour l’installation et la maintenance
Deutsch:
Installations- und Wartungsanleitungen
Italiano:
Istruzioni di installazione e manutenzione
中文:
安装与维护说明
EB-0107
EB-0107-C
EB-0107-C35
EB-0107-J
EB-10K
EB-10K-C
EB-10K-J
Exploded View
Model
B-0107-C
B-0107-C35
B-0107-C90
B-10K-C
EB-0107-C
EB-0107-C35
EB-10K-C
Flow (gpm) [L/min]
0.65 [2.5]
0.65 [2.5]
0.65 [2.5]
0.65 [2.5]
0.65 [2.5]
0.65 [2.5]
0.65 [2.5]
Force (ozf) [N]
4.4 [1.2]
4.4 [1.2]
4.4 [1.2]
4.4 [1.2]
4.4 [1.2]
4.4 [1.2]
4.4 [1.2]
Model
B-0107-J 1.07 [4.1] 7.2 [2.0]
B-0107-J90 1.07 [4.1] 7.2 [2.0]
B-10K-J 1.07 [4.1] 7.2 [2.0]
EB-0107-J 1.07 [4.1] 7.2 [2.0]
EB-10K-J 1.15 [4.4] 7.5 [2.1]
B-0107 1.15 [4.4] 7.5 [2.1]
B-0107-035 1.15 [4.4] 7.5 [2.1]
B-0107-090 1.15 [4.4] 7.5 [2.1]
B-10K 1.15 [4.4] 7.5 [2.1]
EB-0107 5.60 [21.2] 8.3 [2.3]
EB-0107-035 5.60 [21.2] 8.3 [2.3]
EB-10K 5.60 [21.2] 8.3 [2.3]
Flow (gpm) [L/min]
Force (ozf) [N]
2
PARTS
KIT
1,2,3
Grey Part Number Guide
PARTS FOR ANY GREY T&S SPRAY VALVE
1
Ring, Hold Down
2
#27 Washer
3
Body, Spray Valve
4
Grey Handle
5
Nut, Handle
6
Screw, Handle
PARTS FOR ANY GREY BONNET ASSEMBLY
000907-45
010476-45
000065-40
001120-45
003198-45
003199-45
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1
1
1
2
3
Bonnet Assembly
12
Stem
13
Washer, Seat
14
Washer, Bonnet Binding
15
Bonnet
16
Washer, Bonnet Brass
17
Stem, Packing
18
Spring, Bonnet
19
Push Button
20
Grease Pack
21
GREY SPRAY VALVES
B-0107 (1.15 GPM 7.5 Ozf)
7
Nipple
8
Cup, Spray
9
Ring, Sprayhead
10
1.15 GPM Sprayface (1.15 Stamped on Face)
11
Screw, Sprayface
B-0107-C (0.65 GPM 4.4 Ozf)
22
Assembly, B-0107-C Spray Nozzle
23
0.65 GPM Grey Shield (No Outline Around Lettering)
24
0.65 GPM Spray Nozzle (0.65 Stamped on Face)
B-0107-J (1.07 GPM 7.2 Ozf)
22
Assembly, B-0107-J Spray Nozzle
23
1.07 GPM Grey Shield (Square Outline)
24
1.07 GPM Spray Nozzle (1.07 Stamped on Face)
25
Nozzle Holder
002856-40
009306-20
012915-45
001040-45
000608-25
000974-45
001100-45
000895-45
000753-25
012665-45
000694-40
000019-40
007861-45
001121-45
000913-45
002662-40
002659-45NS
N/A
N/A
018292-45NS
N/A
N/A
#1 Parts included in B-10K
#2 Parts included in B-10K-C
#3 Parts included in B-10K-J
3