T&S Brass 00GG User Manual

UNION COUPLING INLETS

00AA
00BB

00GG

00CC 00EE

00JJ

00XX

00WW
W-W Flange
1/2” NPT

00KK
For use with deck at 45°
angle

Maximum countertop

00ZZ

00YY
Y-Y Flange
4” NPT

The following inlets are polished chrome plated and used on mixing faucets to meet varying conditions of
installation. All are interchangeable and are used in lieu of the "00AA" inlets which are ordinarily furnished
on faucets using union coupling inlets. All are available in rough chrome if specified. To order, add suffix
letter to faucet model number. For example: "B-0230-CC" sink mixing faucet with 1/2" NPT male inlet, 1" (25
mm) long.

00AA 1/2" NPT female eccentric flanged inlet
00BB 3/4" NPT female eccentric flanged inlet
00CC 1/2" NPT male inlet, 1" (25 mm) long
00EE 1/2" NPT male inlet with adjustable flange, 1" (25 mm) long
00GG 1/2" NPT female flanged adjustable inlet
00XX 1/2" NPT female flanged adjustable inlet with screwdriver stop
00JJ 1/2" NPT female inlet with loose key stop
00WW 1/2" NPT female flange 90° inlet
00YY 3/4" NPT female flange 90° inlet
00KK 1/2" NPT male inlet for use on 45° decks. Inlet is at 45° angle to mounting face.
00ZZ 1/2" NPT male inlet for use on 45° decks. Inlet is perpendicular to mounting face.

A special flange nut will be supplied when used for a single faucet.

45° angle flange

Maximum deck thick­ness 1-1/2”

thickness 1”