Trycom Technology TRP-C41 User Manual
TRP-C41
User’s Manual
Ethernet To Fiber Media Converter
User’s Manual
Printed Oct. 2013 Rev 1.2
Trycom Technology Co.,Ltd
No.35, Zhongxing Rd., Guishan Township, Taoyuan County 333, Taiwan.
Tel : 886-3-350-3351 Fax: 886-3-350-3352
Web: www.trycom.com.tw
Copyright
Copyright Notice: The information in this manual is subject to change without notice to improve reliability, design and
function and does not represent a commitment on the part manufacturer. No part of this manual may be
reproduced, copied, or transmitted in any form, without prior written permission by the manufacturer. Products
mentioned in this manual are mentioned for identification purposes only. In this manual, product names appearing
may or may not be registered trademarks of their respective companies or copyright.
1. Introduction
TRP-C41 is a device for Ethernet extension over fiber, it supports point-to-point and networked
systems. The high fiber bandwidth connections solve problems with electrical noise and different
ground potentials over long transmission lines. TRP-C41 supports 10/100Base-TX transmissions
up to 100 meters and 100Base-FX transmissions up to 60KM. It is the perfect solution for wide
distance connections with high immunity to electrical noise.
1-1. Features
Wide input range DC power supply.
Plug-and-Play design for the installation within seconds.
Compact and Rugged Metal case capable of withstanding harsh environment.
Data rate: 10/100Mbps auto-negotiation and half-/Full-duplex mode on TX port.
Auto MDI-X/MDI-II for 10/100Base-TX port.
Provides media conversion from UTP to Fiber Optic media types
Supports link fault pass through function.
Supports far end fault function.
LED display to indicate the whole working status.
3 power input types: Direct USB power, external DC adapter and screw terminal.
Support IEEE Standard: 802.3u 100BaseTX & 100BaseFX.
1-2. Specification
Cable: Fiber cable (9/125um).
One 10/100Base-TX auto-negotiation Ethernet RJ-45 port.
One 100Mbps fiber port with Single-mode SC connector.
Built in 128Kb RAM for data buffer.
Wavelength: 1310 nM.
Fiber Power:-15 ~ -8 dBm.
LED indicator: Power and power and TX and fiber link/activity, full/half, 10/100MB.
Distance : 20KM can be up to 60KM (option).
Speed : Auto 10/100MB.
Power Consumption: 12V/160mA.
Power requirement: USB port power or DC input or screw terminal from +10 to 30V.
Operating temperature：0 to 50℃.
Storage temperature : -20 to 55℃.
Humidity: 10-90% Non-condensing.
Dimension: 151mm X 75mm X 26mm.
Weight: 400g.
Loading...