TruVue 70140WN Instruction Manual

TruVue Sony EFFIO-E CCD
700TVL Colour Camera

SPECIFICATION

PACKING LIST

No

Name

Model Number

2.

User Guide

NA

1

1. 700TVL Vandal proof IR Dome

Colour Camera

70140WN

1

3

Mounting Hardware

NA

1

Notes: Before attempting to connect or
operate this product, please read these
instructions carefully and save this manual
for future reference.

Do not attempt to disassemble the
camera. If the camera fails to work,
please contact your local Security
Merchants branch

Model

70140WN

Pick up Sensor

1/3" SONY EFFIO-E Exview HAD CCD II

Effective Picture Elements

(H×V)

PAL:1020(H)x596(V)

Horizontal Resolution

700 TV Line

Minimum Lux

0.001 Lux

0Lux (with IR LED ON)

S/N Ratio

52dB

Scanning System

PAL 2:1 interface

Synchronous System

Internal, Negative sync.

Auto Electronic Shutter

PAL: 1/50s~1/100,000s

Gama Characteristic

0.45

IR Distance

30 Meters (with ￠5X36 PCS Infrared LED)

Video Output

1Vpp, 75Ω

Auto Gain Control

Auto (adjustable)

Power

////

Current DC12V(+/-10%)/500mA

Lens/Angle

2.8~12mm Fixed Iris Manual Zoom Lens
/90~30 Degree

Dimension (mm)

131(Dia) x 93(H) (mm)

Weight (g)

800

IP Rating

IP66

Operating Temperature

-10~+45

℃

RH95% MAX

OSD Menu Joystick control

Min Illumination

CAUTIONS, WARRANTY TERMS & CONDITIONS

Thank you for purchasing this quality product. Before operating the product
please read the instruction manual carefully to ensure proper use of the
product. Please store this instruction manual in a safe place for future
reference. Camera will not be covered under warranty if the following is not
adhered to.

1. Power supply for camera
(1)Use recommended 12VDC regulated power supply only
(2)Be sure to connect each power lead from the 12VDC power
supply to the appropriate terminal marked with “+” and “-“. “+” is for
+12VDC and “-“is for -12VDC. Wrong c onnection will cause malfunction
and damage to the video camera and will not be c overed under manufacturers
warranty

2. Operating conditions and locations

1) Do not attempt to aim the camera at the sun or any other extremely
bright objects. This will cause smearing to app ear irrespective of whether the
camera is operating or not. This can and will damage the CCD (Charge
Coupled Device) sensor.
(2)Do not mount the camera in the following locations.
i) Subjected to extremely high or low temperatures. Make sure the
cameras’ operating temperature range does not exceed -10

℃

~ +45℃
ii) Subjected to high levels of humidity and dust. (Operating humi dity
range: maximum 95 % (non condensation))
iii) Where there are large amounts of water vapours and steam.
iv) Subjected to excessive vibrations.
v) Avoid installing near wireless communication devices which emit
strong electromagnetic fields, some irregularity such as noise on video image
may occur.

3. Do not allow th e camera to be subjected to stron g impacts or shocks. The
camera could be damaged by improper handling or storage.

If any of the above should occur, immediately turn off the camera p ower
supply and consult your dealer/installer.
NB: Never attempt to disassemble or modify the camera.

Alexandria Tel [phone],
Northmead Tel [phone]

Mt Waverley Tel [phone],

Tullamarine Tel [phone]

WA: Tel [phone]

QLD: Tel [phone]

SA: Tel [phone]

Vandal Proof Weather Proof Indoor/

Outdoor IR Colour/BW Dome

Camera with OSD menu

INTRODUCTION

Congratulations on your purchase. This User Guide
will help you setup up and look after your investment. This
Dome camera adopts the latest SONY EFFIO-E CCD
sensor and DSP technology. Some of the main features
include attractive design, small foot print, 700TVL
Resolution, built-in IR illuminator, true to life colour images
and easy to install in any indoor/outdoor application
making it a truly perfect camera for adding to any new or
existing CCTV system.

Please read this instruction manual carefully to
ensure proper operation of the product.

CAMERA CONNECTION

PRODUCT BRIEF

*

* *

*

Sensor (CCD) Adopt 700TVL SONY EFFIO-E 1/3" CCD

*

* *

*

(AGC) Built-in Auto Gain Control (AGC) circuitry.

*

* *

*

Scanning Mode- PAL format

*

* *

*

OSD SETTING- Joystick control

OSD(On Screen Display) Menu settings FOR DETAILED DESCRIPTION REFER
TO CD SUPPLIED

DC12V

Power Supply

Monitor/ DVR

TruVue Camera

TROUBLE SHOOTING

Note

:

: :

:

●

Please note the cameras' operating environment requirements.

Avoid using the camera at too high or too low temperatures.

●

Do not exceed operating temperature -10~+45℃.

●

Never install the camera facing directly at the sun or bright (sun

reflected) object. Otherwise, it will damage the CCD Sensor

●

Do not mount the camera near by heating elements or any form

of radiant heat, this will cause cameras components to fail.

1. No Picture after connecting power

* Power supply may be incorrect, please check the power suppl y voltage and
polarity is correct, confirm 12VDC, 1Amp regulated output.
* Please check all connecting cables are correctly conn ected and cables are
in perfect condition.
* Please check all monitors/DVRS are connected corre ctly to the camera's
BNC.

2. The image displaying direction flowing interference ri pples and lines

* Possibly caused by the power supply AC ripples (com mon in unregulated
Power supplies) replace with Regulated power supply.
* 50Hz interference from other AC circuits, install a 50Hz filte r (Video Isolation
transformer) to eliminate the 50Hz AC interference (50H z Hum).
* Check the monitor/DVR and peripheral equipments use d are not causing
the issue.

3. The picture background colour changes continuousl y
* Fluorescent lamp electromagnetic fields cause colour roll. This i s a

phenomenon of CCTV cameras.
* Increase the distance between the camera and the fl uorescent lamps will
improve the colour changes

4. The picture is washed out, ghosting or fluctuating

* Power supply voltage may be unstable.
* Replace power supply with 12VDC 1AMP Regulated t ype
* Connecting cables not connect correctly or high impedanc e not terminated
* Confirm cables are 100% and the end of line is terminated to 75ohm impedance

To prevent fire or shock hazarded. Do not expose the unit

The symbol is intended to alert the user to the presence of

The symbol is intended to alert the user to the presence of

to rain or moisture.

important operating and maintenance (servicing)

Instructions in the literature accompanying the appliance.

uninsulated ‘dangerous voltage’ within the product’s

enclosure that may be of sufficient Magnitude to constitute

a risk of electric shock to persons.

Video

DC12V

CAUTION:

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO OUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC. DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF

FIRE HAZARDS, DO NOT USE OTHER THAN

SPECIFIED POWER SOURCE.

Notes

：：：：

●The power supply output voltage, current, voltage polarity and
operating temperature must match the camera’s requirement.

●When using the camera in the prone lightning areas, pleas e note to
install lightning protection device to avoid damage to came ra and
periherial devices.

●In order to manitain high quality video images, the po wer supply’s
cable and RG59 coax cable should not exceed cable manuf actures
specifications

MENU

UP

DOWN

RIGHT

LEFT

PRESS TO ENTER

OSD Joystick Control

OSD SET

LENS

MANUAL

AUTO

TYPE:DC/VIDEO

MODE:CLOSE/AUTO/OPEN SPEED:0-255

SHUTTER/

AGC

AUTO

HIGH LUMINANCE MODE:SHUT+AUTO IRIS/AUTO

IRIS

BRIGHTNESS:0-255

LOW LUMINANCE MODE:OFF/AGC

BRIGHTNESS: ×0.25, ×0.5, ×0.75, ×1

MANUAL

MODE:SHUT+AGC

SHUTTER:1/50,1/120,1/250,1/500,1/1000,1/2000,

1/4000,1/10000

AGC:6,12,18,24,30,36,42,44.8

WHITE BAL

ATW SPEED/DELAY CNT/ATW FRAME/ENVIRONMENT

PUSH/ANTI CR/PUSH LOCK/USER1/USER2/MANUL

BACK LIGHT OFF/BLC/HLC

PICT

ADJUST

MORROR/BRIGHTNESS/CONTRAST/SHARPNESS/HUE/GAIN

ATR

OFF

ON LUMINANCE/CONTRAST

MOTION

DET

OFF

ON

DETECT SENCE/BLOCK DISP/MONITOR AREA/

AREA SEL/TOP/BOTTOM/LEFT/RIGHT

PRIVACY

OFF

ON

AREA SEL/TOP/BOTTOM/ LEFT/RIGHT/

COLOR/TRANSP/MOSAIC

DAY/NIGHT

COLOR

B/W BURST:OFF/ON

AUTO

BURST:OFF/ON

DELAY CNT/DAY-NIGHT/NIGHT-DAY

NR NR MODE:Y/C,OFF,Y,C

CAMERA ID OFF/ON

SYNC INT

LANGUAGE

CAMERA RESET/BACK/EXIT/SAVE ALL

ENGLISH/CHINESS/JAPANESS/ESPANOL/PORTUGUES/

PYCCKNN/FRANCAIS/DEUISCH

For detail OSD instructions refer to the user manual on the CD

NB: Specifications may change without notice