Truvox ORBIS OBF431500, ORBIS OBF501500 Original Instructions Manual

ORIGINAL INSTRUCTIONS

CAUTION – READ THESE INSTRUCTIONS BEFORE USING

THE MACHINE

Orbis

OBF431500, OBF501500

USER MANUAL EN

MANUEL D'UTILISATION FR

03-8229-0000 Issue 2 04-15

2

IMPORTANT

BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE

Introduction

The following instructions contain important information about
the machine and safety advice for the operator. Equipment
must be operated, serviced and maintained in accordance with
the manufacturer’s instructions. If in doubt contact the supplier
of your machine.

Read all instructions before using the
machine

Product information

These commercial floor treatment machines are designed for
the high speed polishing and burnishing of hard floors in indoor
areas. A passive dust control system is supplied as standard
with each model. This machine is for indoor use only. The
machine is intended for commercial use, for example in hotels,
schools, hospitals, factories, shops, offices, rental businesses
and other than normal housekeeping purposes.

Technical Specifications

Waste Electrical & Electronic Equipment
(WEEE)

Do not dispose of this device with unsorted waste.
Improper disposal may be harmful to the
environment and human health. Please refer to your
local waste authority for information on return and
collection systems in your area.

IMPORTANT SAFETY ADVICE

The safety information described in this manual provides basic
precautions and supplements standards in force in the country
where the machine is used.

This symbol warns the operator of hazards and unsafe
practices which could result in severe personal injury
or death.

WARNING – to reduce the risk of injury, electric
shock or fire.

1. This machine must only be used for the manufacturer’s
approved application as described in this manual.

2. The machine must be unpacked and assembled in
accordance with these instructions before connecting to the
electrical supply.

3. Operators must be fully trained in the use of the machine in
accordance with these instructions, able to perform regular
user maintenance and the correct selection of accessories.

4. Operators should be physically capable to manoeuvre,
transport and operate the machines.

5. Operators should be able to recognise unusual operation of
the machine and report any problems.

6. Only genuine accessories and spare parts provided with
the machine or those approved by the manufacturer should
be used. All repairs must be performed by a qualified
service agent.

7. Do not use without filters in place.

8. Do not modify the machine from its original design.

9. Only use the machine on firm level surfaces. DO NOT use
on a gradient or more than 2% slopes.

10. DO NOT use on rough uneven surfaces e.g. industrial or
coarse concrete surfaces.

11. DO NOT use outdoors e.g. on patios, decks or rough
surface.

12. DO NOT use diesel/petrol or corrosive detergents to wash
floors, even if diluted.

13. This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the machine by a person responsible for their safety.

14. Keep children and unauthorised persons away from the
machine when in use. Do not use as a toy.

15. The machine must be kept clean and in good condition with
regular inspections of the power cord lead and plug for
signs of any damage. If any parts are damaged they shall
only be replaced by an approved part by the manufacturer,
its service agent or a similar qualified person in order to
avoid a hazard.

ELECTRICAL HAZARD

Model OBF431500 OBF501500

Voltage AC (~)/
Frequency

V/ Hz 230 / 50 230/50

Motor Power W 1100 1100
Productivity rate m²/h 900 900
Pad / brush speed rpm 1500 1500
Pad / brush pressure g/cm² 5.5 4
Pad / brush diameter cm 43 50
Sound pressure level dB(A) 65.7 65.7

Sound pressure level
(with vacuum)

dB(A) 69 69

Dimensions (L x W x
H) with handle

cm

65 x 47 x

125

72 x 55 x

125

Weight kg 34 34.5
Cable length m 15 15
Warranty 2 Years subject to conditions

•

Noise levels measured at a distance of 0.25 meter from machine

and 1.5 metres above floor, when washing a hard floor.
Measurements recorded using a hand held meter.

• Handle vibration does not exceed 2.5 m/s², when operating on a
smooth hard surface.

•

Above dimensions are approx. Since the company’s policy is to
continuously improve the product, there could be changes without
prior notice.

EC DECLARATION OF CONFORMITY

Machine Type: Floor Cleaning Machine
Model: OB4F31500…, OBF501500
This machine is in conformity with the following EU directives:

• Machinery Directive: 2006/42/EC

• The EMC Directive: 2004/108/EC

Applied harmonised standards:

EN60335-1, EN60335-2-67, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN62233

Truvox International Limited
Unit C (East), Hamilton Business Park,
Manaton Way, Botley Road, Malcolm Eneas
Hedge End, Southampton, Operations Manager
SO30 2JR, UK Southampton, 09/04/2015

3

16. CAUTION - This machine is for dry indoor use only and

should not be used or stored outdoors in wet conditions.

17. DO NOT use where hazardous dust is present.

18. DO NOT use in an explosive atmosphere.

19. DO NOT pick up or use near flammable or combustible

fluids, hazardous dusts or vapours.

20. Do not use to pick up moisture or any liquids

21. CAUTION - If it is suspected that there is hazardous dust or

flammable materials stop cleaning the area immediately
and consult your superior.

22. DO NOT use to clean up any burning or lighted materials

such as cigarettes, matches, ashes or other combustible
objects.

23. Take care when using a machine near the top of stairs to

avoid overbalancing.

24. DO NOT put any object into openings. DO NOT use with

any opening blocked; keep free of dust, debris and anything
that may reduce airflow.

25. DO NOT cover the machine when in use.

26. Keep hair, loose clothing, hands, feet and all other parts of

the body away from openings and moving parts.

27. DO NOT use if it has been damaged, left outdoors or

dropped in water.

28. Do not operate the machine with a damaged supply lead or

plug, or after the machine malfunctions or is damaged in
any way. Contact an authorised Service Agent for repair or
adjustment.

29. Only replace the supply cord with the type specified in the

instruction manual.

30. This machine should always be connected to a fully earthed

power supply of the right voltage and frequency.

31. DO NOT leave machine running unattended.

32. Do not leave the machine connected to the electricity

supply when not in use, always remove the plug from the
socket-outlet.

33. Switch off the machine before removing the plug.

34. When unplugging, pull the plug, not the supply cord.

35. The machine shall be disconnected from its power source

when not in use and before commencing cleaning of the
machine or maintenance and when replacing parts or
accessories, by removing the plug from the socket-outlet.

36. DO NOT pull or carry by the supply cord. DO NOT use cord

as a handle, close door on cord or pull cord around sharp
edges or corners.

37. WARNING: Keep the supply cord clear of moving parts.

38. DO NOT kink or twist the supply cord and keep cord away

from heated surfaces.

39. DO NOT operate switches or touch the mains plug with wet

hands as this may cause electric shock.

40. The power supply cord plus any extension leads should not

exceed 30 metres in total. The cross section of an
extension cable wiring must be at least 2.5mm².

CONTROLS ON THE MACHINE

Fig 1

The operating controls for all models are located on the handle
(Fig 1 ).

1 - Switch trigger, left hand

Used to switch motor ON and OFF. Can only be operated with
handle in working position, and if left hand interlock button (2)
has previously been depressed

2 - Interlock button, left hand

This must be depressed initially to enable left hand switch
trigger to switch motor on.

3 - Switch trigger, right hand

Used to switch motor ON and OFF. Can only be operated with
handle in working position, and if right hand interlock button (4)
has previously been depressed.

4 - Interlock button, right hand

This must be depressed initially to enable right hand switch
trigger to switch motor on.

5 - Handle adjustment lever

Used to adjust handle to comfortable working height. Note: For
safety reasons the machine cannot be operated unless the
handle is moved to a working height.

Cable winder

Used to hold supply cord in place on handle when machine is
not in use.

Neon indicator (on handle)

Lights when the machine is connected to the power supply.

Fitting pads

WARNING - This appliance has been designed for
use with the pads specified by the manufacturer.
The fitting of other pads may affect its

performance and safety.

Always ensure machine is unplugged before fitting or removing
parts.

• Raise cleaning head by pulling handle backwards to rest on
the floor.

• Unscrew central pad lock and remove.

Fig 2

• Press cleaning pad onto drive disc, refit pad lock and tighten
(Fig 2).

• Return machine to upright position.

• IMPORTANT - Never allow the cleaning head to rest on

the pad when not in use.

Adjusting the handle height

Select the most comfortable handle height using the
adjustment lever as previously described (see Controls) and
lock in position.

Operation
Starting the machine

• Fully unwind the supply cord from the handle and plug in to
a convenient socket outlet. The neon indicator on the handle
should light showing that power is available.

• With the handle set at a convenient working height and with
both left and right hands on the handle, depress both
interlock buttons with the thumbs and squeeze both switch
triggers to start the machine (Fig 2).