Trust TV-1800 Product Information

TV-1800 PCTV Tuner

1

UK

Product information
Connections

Connection Description

VGA IN Connection from computer (VGA card).

PC AUDIO IN Connection from sound card.

VGA OUT Connection to the monitor.

STEREO OUT Connection for the speakers.

TV OUT Connection for the output (to the TV) video signal (yellow).

ANTENNA Aerial connection.

DC-IN Power adapter connection (12VDC/1A/12VA).

AUDIO-L IN Connection for the AUDIO signal input (left).

AUDIO-R IN Connection for the AUDIO signal input (right).

VIDEO IN Connection for VIDEO input signal.

S-VIDEO IN Connection for S-VIDEO input signal.

Control Panel

Description

CH+/UP Channel up/Menu up.

CH-/DOWN Channel down/Menu down.

VOL- Decrease volume.

VOL+/ENTER Increase volume/Menu confirmation.

MENU/ESC Opens the menu.

FINE TUNE Fine tuning.

POP SOUND
SEL

Selects the sound source (Computer sound or sound from the POP windows).

Note: This function only works if the POP window has been activated.

POP - Picture On Picture mode.

- Activates the POP window.

- Alters the size of the POP window when this is active.

SOURCE Source (PC/TV/VIDEO/S-VIDEO).

POWER Turns the device on/off.

Installation

Buttons described in the instruction manual correspond to buttons on the remote control.

Other buttons are detailed below.

1 Open the battery case by pressing on the cover and sliding it down and insert the batteries as indicated.
2 Switch off the computer.

TV-1800 PCTV Tuner

2

UK

3 Removes the VGA monitor cable of the VGA card.

4

A. Connect the provided VGA cable to the VGA IN and connect the other end to the VGA card of your

computer.

B. Connect one end of the 3.5 mm audio cable to PC AUDIO IN and connect the other end to your

computer’s speaker output. In newer sound cards this is green.
C. Connect the VGA monitor cable to VGA OUT.
D. Connect your speakers to the device’s STEREO OUT connection.
E. Connect the aerial cable.
F. Connect the power adapter and plug it in to an electrical outlet.

5 Switch the PC on and TRUST COMBI TV-PC POP VIEW.

The TRUST COMBI TV-PC POP VIEW will turn on in the TV mode by default. As a result, the computer

image will be replaced by a snowy image.

Selecting the TV system

The TRUST COMBI TV-PC POP VIEW is set to PAL B/G by default.

Please carry out the steps below if you would like to change the system.

6

Press the MENU/ESC button on the device. A menu will appear on the screen.

7

Use the CH-/DOWN button to scroll to option 3 (TV FUNCTION) and press the VOL+/ENTER button to
go to the next menu.

8

Press the VOL+/ENTER button again to go to the next menu.

9

In this new menu, use the CH-/DOWN button to select the system you wish to use.
Press the VOL+/ENTER button to save your choice.
Press the MENU/ESC button to close the menu.

Country Colour TV Country Colour TV

United Kingdom PAL I Denmark PAL B
Germany * PAL B/G Sweden PAL B/G
France SECAM E/L Hungary PAL B/G + D/K
Italy PAL B/G Czech SECAM / PAL D/K
Spain PAL B/G Slovakia SECAM / PAL D/K
Poland PAL D/K Finland PAL B/G
Netherlands PAL B/G Norway PAL B/G
Portugal PAL B/G Turkey PAL B
Greece PAL B/G

Russia SECAM D/K

* Germany (previously East: SECAM / PAL B/G)

Find TV channels

Repeat step 6+7

10

Use the CH-/DOWN button to scroll to option 4 (AUTO SCAN) and press the VOL+/ENTER button to
start searching for channels.

Fine tuning of TV channels