Trust START-LINE ACD-2400 User Manual

START-LINE

RECEIVER ACD-2400

MAINS SOCKET SWITCH

USER MANUAL

SMART Home

Version 1.0

Visit www.trustsmarthome.com

for the most recent user manuals

2

ACD-2400 MAINS SOCKET SWITCH

COMPATIBILITY

This receiver works with all

trust smart h

ome

transmitters.

FUNCTIONALITY

Mains socket switch to switch lights or electronic
devices on/o up to 2400 Watt.

WIRELESS RADIO SIGNAL

• The 433.92 MHz radio signal passes through walls, windows and doors.

• Indoor range: up to 30 m. Outdoor range: up to 70 m. (optimal conditions)

• The range is strongly dependent on local conditions, such as the presence of metals. For example,
the thin metal coating in Low-emissivity (Low-E) glass has a negative impact on the range of radio
signals.

TECHNICAL SPECIFICATIONS

Power supply input 220-240 VAC 50 Hz

Maximum load 2400 Watt

RF frequency 433,92 MHz

RF range Up to 30m indoor/ 70m outdoor (optimal conditions)

Memory addresses 6

3

ACD-2400 MAINS SOCKET SWITCH

MAXIMUM LOAD

Never connect lights or equipment that exceed
the maximum load of the receiver, as it can result
in defects.

SHOCK HAZARD

Caution when installing a receiver. Voltage may
be present, even when a receiver is switched o.

LIFE-SUPPORT

Never use

trust smart h

ome products for life­support systems or other applications in which
equipment malfunctions can have life-threatening
consequences.

INTERFERENCE

All wireless devices may be subject to
interference, which could aect reception. The
minimum distance between 2 receivers should be
at least 50 cm.

REPAIRING

Do not attempt to repair this product. There are
no user-serviceable parts inside.

WATER-RESISTANCE

This product is not water-resistant. Keep it dry.
Moisture will corrode the inner electronics and
can result in a short circuit, defects and shock
hazard.

CLEANING

Use a dry cloth to clean this product. Do not use
harsh chemicals, cleaning solvents, or strong
detergents.

HANDLING

Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.

ENVIRONMENT

Do not expose the product to excessive heat
or cold, as it can damage or shorten the life of
electronic circuit boards.

Read this manual carefully. Not following them may be dangerous and faulty installation will invalidate
any warranty that may apply to this product.