022874-01 Issue 2.0 08/17
Model 34
Electronic totalizers and hour meters
34xx-0xxx
Two Hole Mount
34xx-1xxx
Three Hole Mount
34xx-2xxx
Rectan gular Flu sh Mount
34xx-3xxx
Round Flu sh Mount
34xx-5xxx
Rectangular Snap-in Mount
Common Specication
Display LCD 0.28” [7mm] high gures black on light background
Input Options
Power Self-powered battery life 10+ years
Terminations Standard 0.25 0” [6.4mm] spades
Approvals UL & cUL re cognized (le # ELIY2.E36 690), CE, SAE, NEMA 4/4X/IP66 compliant
Environmental Temperature (Storage & Operating): -40˚F to + 185˚F [-40˚C to +85˚C]
EMC Compliance EN61326:2012
Enclosure NEM A 4/4X, 12 & IP66 compliant from the front when properly mounted using the
Weight 1 oz. [28g]
Reset Options 34xx-x x0x - Non Reset
MODEL RANGE INPUT LOW INPUT HIGH
34x0
34x1 Dry Contact n/a n/a
34x3 3-30VDC <2VDC >=3VDC
Humidity: 95% RH per SAE J1378
Shock: 44 to 55g’s per SAE J1378
Dielectric: 10 00VAC 50/60 Hz for 1 minute (34x0 on ly)
Compliance: Compliant to the European WEEE and RoHS Directives
Protect ion Against: Alternator load dump 150V EMI (Elect romagnetic Interface) +400V
@ 500Hz inductive switching and reverse polarity (34x0 only)
optional gasket. (N ot applicable in t he Snap -In Model)
34xx-x x1x - Remote Reset / Dry Contact (switch)
10-300VDC
20-300VAC
<3VDC
<3VAC
>10VDC
>20VAC
3400 (Totalizer) Specication
Display 8 digits (99999999)
Max pulse rate 40 pulses per second (Hz)
3410 (Hour Meter) Specication
Display 9999999.9 (hours & 1/10’s)
Run Indicator Blinking decimal point
Accuracy ± 0.1% @ room temperature
Find Quality Products Online at: sales@GlobalTestSupply.com
± 0.2% over the specified temperature range
www.GlobalTestSupply.com
Dimensions
.118 [3.00]
.062 [1.57]
(All dimensions are nominal)
0.157
C
L
27.90
1.750
44.45
0.78
19.70
1.44
TWO HOLE MOUNT
36.6
4
1.09
27.6
(34xx-0xx)
2.87
72.90
1.26
32.13
0.94
23.9
2.19
55.65
0.78
19.70
THREE HOLE MOUNT
0.63
16.07
0.152
3.85
(34xx-1xx)
1.09
27.6
50.30
1.98
0.03
0.70
0.78
19.70
2.21
56.1
0.776
19.70
0.03
0.70
ROUND FLUSH
MOUNT
(34xx-3xx)
50.3
1.98
1.60
40.60
1.10
27.90
0.25
6.35
RECTANGULAR
FLUSH (34xx-2xx)
AND SNAP-IN
0.78
19.70
0.88
22.40
1.09
27.6
(34xx-5xx)
0.94
23.9
Panel Cut-out
0.965
0.949
24.50
24.10
Max panel thickness, snap-in housing: .125” [3.18]
Max panel thickness, without gasket: .375” [9.5]
Min panel thickness, with or without gasket: .04” [1.0]
Wiring Diagrams
Inputs do not have a polarity and can be wired either way round.
34x3-xxxx
1 2
3-30VDC Input
CAUTION: RISK OF ELECTRIC SHOCK. INSTALLATION
MUST BE CARRIED OUT BY SUITABLY QUALIFIED AND
COMPETENT PERSONEL ONLY. HAZARDOUS VOLTAGES
MAY BE PRESENT ON THE CONNECTION. THIS PRODUCT
CONTAINS AN INTERNAL LITIUM BATTERY. DISPOSE OF IN
ACCORDANCE WITH LOCAL REQUIREMENTS
34x0-xxxx
1 2
10-300VDC / 20-300VAC Input
1.476
1.461
37.50
37.10
34x1-xxxx
1 2
Dry Contact Input
Mounting Clip
Clip included
(not supplied with snap-in model)
Gaskets (Optional)
Gasket 5003-009
Max panel thickness: .275” [7.9]
Gasket thickness: .118” [3.00]
Gasket 5003-010
Max panel thickness: .275” [7.9]
Gasket thickness: .118” [3.00]
Gasket 5003-017
Max panel thickness: .313” [6.5]
Gasket thickness: .062” [1.57]
WITH RESET (4 TERMINAL)
34xx-xx1x
1 2
3 4
Note: Do not connect AC or DC
voltages to terminals 3 or 4
!
COMPLIANT
Reset
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Loading...