ASSEMBLY INSTRUCTIONS
HARDWARE LIST
ITEM DESCRIPTION
QTY
1 JCBB BOLT M8 x 16mm
8 PCS
2 JCBB BOLT M8 x 35mm
8 PCS
3 JCBB BOLT M8 x 50mm
2 PCS
4 JCBB BOLT M8 x 60mm
2 PCS
5 JCBB BOLT M8 x 70mm
4 PCS
6
M8 FLAT WASHER
16 PCS
7
M8 SPRING WASHER
16 PCS
8
WOOD SCREW M4 x 32mm
9 PCS
9 WOOD DOWEL M10 x 30mm
8 PCS
10
M5 ALLEN KEY (BALL SHAPE)
1 PC
STEP 1
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
PART LIST
ITEM DESCRIPTION
QTY
A
HEADBOARD 1 PC
B
HEADBOARD PANEL 1 PC
C
FOOTBOARD 1 PC
D
SIDE RAIL 2 PCS
E
CENTER RAIL 1 PC
F
CENTER SUPPORT LEG 3 PCS
G
BED SLAT 1 SET
H
BED LEG 4 PCS
I
HEADBOARD SUPPORT WOOD
2 PCS
STEP 2
B
9
C
9
E
F
10
5
7
6
I
A
2
7
10
6
H
D
Don't screw tied
x 2
x 4
x 2
x 2
L
R
QUEEN BED
1 of 3
ASSEMBLY INSTRUCTIONS
2 of 3
STEP 4 STEP 5
10
6
4
7
E
A
3
7
6
x 2
**Finish step 5,
Please screw tied the step 2 bolt.
10
1
B
D
x 4
x 4
STEP A
STEP B
ASSEMBLY INSTRUCTIONS
3 of 3
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
8
G
D
STEP 6 STEP 7
Loading...