True Manufacturing TR2HPT-2S-2S General Manual

TRUE FOOD SERVICE

EQUIPMENT, INC.

St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366

[phone] • FAX [phone] • [phone] • www.truemfg.com

Parts Dept. (800)424-TRUE • Parts Dept. FAX# [phone]

Model: Description:

TR2HPT-2S-2S

TR Series: Solid-Door Pass-Thru Heated Cabinets

Project Name:

Location:

Item #: Qty:

Model #:

TR2HPT-2S-2S

Provides cabinet holding
temperature of 80˚F to 180˚F
(26.67˚C to 82.22˚C).

Internal fan provides low
velocity, forced-air heat
distribution to assure even
temperatures throughout the
cabinet.

(2) stainless steel 1000 watt
nned tube heating elements
per section for uniform
generation of electric heat.
Cabinet comes with a total of
4000 watts.

AIA #

SIS #

ROUGH-IN DATA

Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).

Cabinet Dimensions

Capacity

Solid

Model

Doors

TR2HPT-2S-2S 4 56

* Height does not include 5" (127 mm) for castors and 1" (26 mm) for system mechanical components.
Requires 115/208 -240/60 Hz, single phase, 3 pole, 4 wire circuit.

(Cu. Ft.)

(liters)

1586

51 3/8

1305

(inches)

(mm)

L D H*

37 1/4

947

78 1/4

1988

Watts Volts PH Amps

4000 115/208-240 1 16.8 9

300 series stainless steel exterior
and interior. The very nest
stainless; higher tensile strength
for fewer dents and scratches.

Cabinet comes equipped with
(1) interior kit option per
full section standard, factory
installed. (4) different interior
kits available.

Entire cabinet structure and
solid doors are foamed-in-place
using high density, CFC free,
polyurethane insulation.

Positive seal self-closing doors
with 120 degrees stay open
feature. Lifetime guaranteed
door hinges and recessed door
handles.

Specications subject to change without notice.

Crated

Cord Length

(total feet)

(total m)

Weight

(lbs.)

(kg)

600

2.74

273

2/04

R

E

G

N

Y

E

S

S

A

S

V

I

G

N

R

®

C

Printed in U.S.A.

APPROVALS:

US

Model: Description:

TR2HPT-2S-2S

TR Series: Solid-Door Pass-Thru
Heated Cabinets

STANDARD FEATURES

DESIGN

• True’s solid door pass-thru heated
cabinets are designed with enduring
quality that protects your long term
investment.

HEATER SYSTEM

• Cabinet is designed to provide
holding temperatures of 80˚F to 180˚F
(26.67˚C to 82.22˚C). Heating system
controlled by exterior on/off switch
and temperature control dial.

• (2) stainless steel, nned tube heating
elements (1000 watts each) per section
for uniform generation of electric
heat. Cabinet comes with a total of
4000 watts.

• Cabinet equipped with low-velocity
fans to assure even temperature
distribution throughout the cabinet.
Fans are controllable by exterior on/
off switch.

• Manually controlled vent located
on top of the cabinet for positive
humidity control.

• Exterior dial thermometer; accurate
direct reading of internal cabinet
temperature.

CABINET CONSTRUCTION

• Exterior - 300 series stainless steel
door, front, sides, back and bottom.

• Interior- 300 series stainless steel liner
and oor.

• Insulation - entire cabinet structure
and solid door is foamed-in-place
using high density, CFC free,
polyurethane insulation.

• Cabinet mounted on a welded, heavy
duty galvanized frame rail. Rail dipped
in rust inhibiting enamel paint for
corrosion protection inside and out.

• Frame rail tted with 4" (102 mm)
diameter stem castors. Locks provided
on front set.

DOORS

• Front and rear doors are constructed
with a 300 series stainless steel door
liner. Doors open within cabinet
dimension. Door locks standard.

• Lifetime guaranteed recessed door
handles. Each door tted with 12"
(305 mm) long recessed handle that
is foamed-in-place with a sheet
metal interlock to insure permanent
attachment.

• Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.

SHELVING

• (1) factory installed, interior kit option
per full section standard. (4) different
interior kits available. See Kit Options.

LIGHTING

• Incandescent interior lighting; safety
shielded.

ELECTRICAL

• Unit comes with 4 feed wires
(including ground) to be hardwired
at installation site to a 115/208-240/60
Hz. Single phase - 20 amp dedicated
outlet.

OPTIONAL FEATURES/ACCESSORIES

 6" (153 mm) stainless steel legs.
 Seismic/anged legs.
 Metal door handle.
 Stainless steel (electro polished)

shelves.

 Chrome shelves.
 Universal pan slides.
 #1 pan slides.
 #2 rod style pan slides.
 Curb mountable units.
 Export units - consult factory.
 Prison package options - consult

factory.

KIT OPTIONS

 Kit #1: Nine sets of #1 type tray slides,

bottom support of one 18" x 26"
(456 mm x 661 mm) pan or two
14" x 18" (356 mm x 456 mm) pans.

 Kit #2: One set half-section #2 steel

rod tray slides, rim support of one
18" x 26" (456 mm x 661 mm) pan.

 Kit #3: Six sets of universal type tray

slides, bottom support of one
18"x 26"(456 mm x 661 mm) pan, two
14"x18" (356 mm x 456 mm) pans or
two 12" x 20" (305 mm x 508 mm)
pans.

 Kit #4: Three chrome shelves

23 1/2"x 28 13/16"(597 mm x 732 mm)
and plated shelf supports.

PLAN VIEW

2717/32"

(700 mm)

845/16"

793/16"

(2012 mm)

843/16"

(2139 mm)

513/8"

(1305 mm)

WARRANTY

One year warranty on all parts

& labor (U.S.A. only)

FRONT VIEW

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

5"

(127 mm)

KCL

TOP VIEW

Model Front Side Plan 3D

TR2HPT-2S-2S TFQY80E TFQY96S TFQY96P TFQY963

TRUE FOOD SERVICE EQUIPMENT

St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • FAX [phone] • [phone] • www.truemfg.com

371/4"

(947 mm)

2717/32"

(700 mm)

(2142 mm)