Trueheat RCT6-6G, RCT, RCT3-2, RCT-3G, RCT9-6 Installation & Operation Manual

Trueheat RCT & RCR IO Manual Page 1 of 20

Open Burner,

Griddle & Oven Range

INSTALLATION & OPERATION MANUAL

RCT
RCR

Trueheat RCT & RCR IO Manual Page 2 of 20

CONGRATULATIONS!

Thank you for choosing Trueheat.

This product has been specifically designed by Comcater to meet a wide range of applications
and represents the best quality and highest value equipment.

Please read the Instruction Manual carefully to ensure the safe and reliable operation and
performance of your equipment.

Should you require service, you will be supported by Comcater’s trained and qualified service
network.

COMCATER AUSTRALIA

www.comcater.com.au

National Head Office

156 Swann Drive, Derrimut, VIC 3030
Phone: [phone]
Fax: [phone]
Email: [e-mail]

Technical Services Group

Phone: [phone]
Fax: [phone]

Email:

Equipment Servicing (24/7)

[e-mail]

Equipment Spare Parts

[e-mail]

Technical Support

[e-mail]

Comcater QR Codes

Comcater Website Log a Service Call Online Spare Parts Store

Reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorised in writing by Comcater. Comcater reserves the
right to change design and specifications without prior notice. © Copyright Comcater Pty Ltd, August 2017.

Trueheat RCT & RCR IO Manual Page 3 of 20

TABLE OF CONTENTS

INTRODUCTION

Warranty ...........................................................................................................................4

Date Plate Location ..........................................................................................................4

WARNINGS ................................................................................................................................ 5

GENERAL INFORMATION ......................................................................................................... 6

SPECIFICATIONS

Dimensions, Weight & Installation Drawings .................................................................... 7

Accessories & Optional Accessories ............................................................................... 7

Gas Configuration ........................................................................................................... 8

Gas Consumption by model ............................................................................................ 9

INSTALLATION

Gas Connection .............................................................................................................. 10

Installation Clearances ................................................................................................... 11

Levelling .......................................................................................................................... 11

COMMISSIONING / BURNER ADJUSTMENT

Leak Test ....................................................................................................................... 12

Test Point Pressure ........................................................................................................ 12

Pilot Adjustment ............................................................................................................. 12

Target Adjustment .......................................................................................................... 12

GAS CONVERSION

Gas Conversion Kits ........................................................................................................ 13

OPERATION

First Time Use ................................................................................................................ 14

Daily Operation ............................................................................................................... 14

Lighting instructions ......................................................................................................... 14

MAINTENANCE

Griddle Seasoning and Maintenance .............................................................................. 15

Daily Cleaning, Stainless Steel, Enamel coated surfaces ............................................... 16

Recommended Service Plan .......................................................................................... 17

TROUBLESHOOTING

Burner will not light ......................................................................................................... 18

Pilot will not light .............................................................................................................. 18

Trueheat RCT & RCR IO Manual Page 4 of 20

NOTE: Data Plate is located behind the control panel on Counter­Top models, and behind the kicker plate on Oven Range Models.

MODEL: RCT9-9G
SERIAL NO: 1709TT9001

INTRODUCTION

GENERAL

The Trueheat RC Series is designed for commercial catering purposes only and incorporates a
wide range of design features. It is designed to deliver high-end performance to fulfill the busy
demands within a commercial kitchen. It is available in various appliances and configurations
including: Ranges with open burners, griddles with oven or as Counter-Top unit.
Broilers, salamanders, pasta cookers and deep fryers.
This versatility will satisfy a wide range of customer needs.

WARRANTY

12 months replacement of parts including labour, for goods found to be faulty due to defective
materials, manufacture and/or workmanship. This warranty is void if installation, operation and/or
maintenance of the equipment are not in accordance with manufacturer’s instructions and
recommendations.
Unauthorised modifications to the equipment will void the warranty and product certification.
All warranty work will be undertaken in normal working hours from Monday – Friday 8:00am to
4:00pm

Warranty does not extend to:
Damages caused in shipment
Damage as a result of incorrect installation
Damage as a result of incorrect operation
Damages caused by Unauthorised service and use of non-original parts
Gas supply issues to the equipment
Calibration of thermostats after 90 days
Failure resulting from improper maintenance
Failure as a result of tampering with, removal of, or changing any pre-set control or
safety device
After hours Service - Penalty rates apply for afterhours service.
Conditions as defined in Comcater terms and condition of sale, a copy of Comcater’s terms and
conditions of sale can be found at www.comcater.com.au/terms

For all warranty work, authorized service, genuine and authorized spare parts, please contact
Comcater Service 1800 810 161.
Please ensure you quote the Model and Serial Number of the unit.
The Model and Serial Number of the unit is recorded on the sales invoice, and also shown on
the top right side of the front control panel on Counter-Top models and on the data plate.
The data plate is located behind the front control panel.

Trueheat RCT & RCR IO Manual Page 5 of 20

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE

OR MAINTENANCE CAN CAUSE INJURY OR DEATH. THE

INSTRUCTION MANUAL MUST BE READ CAREFULLY BEFORE

INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.

TO BE INSTALLED ONLY BY AN AUTHORISED PERSON IN

ACCORDANCE WITH AS 5601, LOCAL AUTHORITY, GAS,

ELECTRICITY, ANY APPLICABLE STATUTORY REGULATIONS AND

MANUFACTURER REQUIREMENTS.

THIS EQUIPMENT IS DESIGNED FOR COMMERCIAL CATERING

PURPOSES AND WILL GENERATE SIGNIFICANT HEAT. HOT

SURFACES WILL CAUSE BURNS. A HAZARD AND RISK

ASSESSMENT MUST BE UNDERTAKEN BY OWNERS AND ALL

OPERATORS MADE AWARE OF THESE.

DO NOT STORE OR USE FLAMMABLE LIQUIDS NEAR THIS

APPLIANCE.

DO NOT SPRAY AEROSOLS NEAR THIS APPLIANCE WHILE IT IS IN

OPERATION.

INSTALLATION CLEARANCES AS SPECIFIED MUST BE OBSERVED.

IF YOU SMELL GAS, TURN THE UNIT OFF AND THE MAIN GAS

SUPPLY VALVE TO THE UNIT. CONTACT YOUR GAS SUPPLIER OR

AN AUTHORISED PERSON.

BEFORE TURNING ON THE MAIN GAS SUPPLY, CHECK THE UNIT TO

BE CERTAIN THAT ALL THE VALVES ARE IN THE “OFF” POSITION.

WARNINGS

Trueheat RCT & RCR IO Manual Page 6 of 20

GENERAL INFORMATION

INSPECTION

Please inspect the unit on receipt. If the unit is damaged, contact the carrier immediately and le a damage
claim with them. Save all packing materials when ling a claim. Freight damage claims are the responsibility
of the purchaser and are not covered under warranty.

OPERATOR MANUAL

This manual contains important informaon for your safety and the installaon, operaon, maintenance
and service of this equipment. Please read the manual carefully and ensure all operators of the
equipment are aware of the contents and safety requirements. You must also assess all hazards and
risks associated with the operaon of the equipment in your environment and advise all operators of
these.

INSTALLATION

This equipment must be installed by an authorized person in accordance with AS 5601, local authority,
gas, electricity, any applicable statutory regulaons and manufacturer requirements.

GAS CONNECTION

The appliance must be connected by an authorized person to the gas type specied on the unit. The gas
type is shown adjacent to the rear gas connecon point and on the data plate. Connect to and use only
the correct type of gas.

GAS PRESSURE

The authorized person installing this equipment must ensure that the gas operang pressure is the same as shown
on the rang plate and that there is sucient gas volume for the appliance to operator correctly.

COMMISSIONING

The authorized person installing this equipment must commission the equipment in accordance with AS 5601 - gas
leakage, operaonal checking, adjustments and instrucng the owner on use of the equipment are prescribed
requirements.