True Fitness Atlas 201, Atlas 200 Owner's Manual

Atlas 200/201
Group Training System
Model # XFT-200 or XFT-201
Revision 040519
OWNER’S
MANUAL
Strength
Atlas 200/201
IMPORTANT: All products shown are prototype. Actual product delivered may vary. Product specications, features & soware are subject to change without notice. For the most up-to-date owner’s manual please visit www.truetness.com. For documents in additional languages please visit www.truetness.com/resources/document-library/
IMPORTANTE: Todos los productos mostrados son prototipos. La realidad el producto suministrado puede diferir. Especicaciones de productos, características y soware están sujetas a cambios sin previo aviso. Para la más actualizada de este manual del propietario, por favor visite www.truetness.com Para los documentos en otros idiomas, por favor visite www.truetness.com/resources/document-library/
IMPORTANT: Tous les produits présentés sont prototype. Le produit réel livré peut varier. Spécications du produit, caractéristiques et logiciels sont sujettes à modication sans préavis. Pour la plus à jour le manuel du propriétaire s'il vous plaît visitez www.truetness.com. Pour documents dans des langues supplémentaires, veuillez www.truetness.com/resources/document-library/ de visite
重要提示: 显示所有产品的原型。实际交付的产品可能有所不同产品规格,功能和软件如有更改,恕不另 行通知迄今为止对于大多数的使用说明书,请访问www.true󽘀tness.com 对于其他语言的文档,请访问 www.true󽘀tness.com/resources/document-library/
ھام: جمیع المنتجات المعروضة ھي النموذج. قد تختلف المنتج الفعلي تسلیمھا. مواصفات المنتج، والمیزات والبرامج قابلة للتغییر دون إشعار. لمعظم ما یصل حتى الآن دلیل المالك یرجى زیارة www.truetness.com. للمستندات في لغات إضافیة، یرجى زیارة www.truetness.com/resources/document-library/
WICHTIG: Alle hier gezeigten Produkte sind Prototypen. Das tatsächliche Produkt ausgeliefert wird, kann variieren. Produkt-Spezikationen, Funktionen und Soware können sich ohne vorherige Ankündigung ändern. In den meisten Fällen bis zu Bedienungsanleitung Bisher besuchen Sie bitte www.truetness.com. Für Dokumente in weiteren Sprachen nden Sie unter www.truetness.com/resources/document-library/
BELANGRIJK: Alle getoonde producten zijn prototype. Daadwerkelijke product geleverd kan verschillen. Product specicaties, eigenschappen & soware zijn onderhevig aan verandering zonder kennisgeving. Voor de meest actuele handleiding van de eigenaar kunt u terecht www.truetness.com. Voor documenten in andere talen kunt u terecht op www.truetness.com/resources/document-library/
:    .  ,   .  ,          .           ,  www.truetness.com .    , ,  www.truetness.com/resources/document-library/
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Strength
Atlas 200/201
A MESSAGE TO OUR CUSTOMERS
Frank Trulaske began TRUE Fitness® over thirty-ve year ago with the simple philosophy of delivering superior tness products, service, and support. Today, TRUE is the global leader in premium tness equipment for the commercial and residential markets. Our goal is to be the leader in technology, innovation, performance, safety and style. TRUE has received many awards for its product over the years and remains the benchmark for the industry. Fitness facilities and consumers invest in TRUE products for their durable commercial platforms used in all its products, both commercial and residential alike.
e proud manufacturing tradition of quality and the culture of innovation at TRUE have given rise to a full line of extraordinary cardio and strength equipment. As a result, people all over the world are beneting from the TRUE experience. Innovation across the full product line has made TRUE successful and is a trademark of the TRUE heritage. TRUE’s patented Heart Rate Control technology is just one of the remarkable ways we deliver simple and superior performance every user can enjoy, and most importantly, use to achieve personal health and tness goals.
At the heart of our success is the relentless and systematic life testing of both our products and their components. We have dedicated employees who understand our philosophy is to deliver the best products in the world.
Our goal is to deliver the world’s best premium equipment for our customers’ health and tness solutions.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Strength
Atlas 200/201
Table of Contents
CHAPTER 1: SAFETY INSTRUCTIONS ..........................................................................................................................5
ANCHORING: ................................................................................................................................9
COMMERICAL MAINTENANCE SCHEDULE: ...................................................................10
CHAPTER 2: ASSEMBLY GUIDE ...................................................................................................................................11
MACHINE SPECIFICATIONS: .................................................................................................11
COMPLIANCES: ..........................................................................................................................11
REQUIRED TOOLS: ....................................................................................................................12
LABELS: .........................................................................................................................................12
PRE-ASSEMBLY CHECKLIST: ..................................................................................................13
XFT-200/201 ASSEMBLY OVERVIEW: ....................................................................................17
ASSEMBLY STEPS: ......................................................................................................................18
CHAPTER 3: CARE & MAINTENANCE .......................................................................................................................45
CARE & MAINTENANCE: ........................................................................................................45
DAILY INSPECTION & MAINTENANCE: .............................................................................45
WEEKLY INSPECTION & MAINTENANCE: ........................................................................45
OTHER SCHEDULED PREVENTIVE MAINTENANCE: ...................................................46
CLEANING THE EQUIPMENT: ..............................................................................................46
CABLE INSPECTION & MAINTENANCE: ............................................................................ 47
CHAPTER 4: CUSTOMER SERVICE ..............................................................................................................................49
CONTACTING SERVICE: .......................................................................................................... 49
CONTACTING SALES: ...............................................................................................................49
REPORTING FREIGHT OR PARTS DAMAGE: .....................................................................50
CHAPTER 5: WARRANTY INFORMATION: ..............................................................................................................51
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
CHAPTER 1: SAFETY INSTRUCTIONS
F
ACILITY AND USER SAFETY PRECAUTIONS
exiting the machine. Be certain members are instructed on how to operate and adjust
S
AFETY
1. Review and understand all of the warning labels affixed to this machine and on the facility safety sign.
2. Be certain that the machine operation is understood before it is used. Refer to the instructional procedure label affixed to the machine.
3. Make sure all users are properly trained on how to use this equipment. If this machine is being used in a commercial setting, end users may not have access to this owners manual. It is the responsibility of the facility to instruct users as to the proper usage of the equipment as well as making them aware of potential hazards. Maximum user weight is 300 lbs (136 kg) unless
otherwise stated in the manual.
4. Use each machine only for the intended exercise. Do not allow anyone to invent exercises not
included on the instructional procedure label or the intended use Label.
Strength
Atlas 200/201
5. Do not modify the machine.
6. This equipment meets industry safety standards for stability when used for the intended
exercise. Do not allow straps, resistance bands or other means to be attached to the framework of this machine to perform stretching or body weight exercises. This can result in machine instability and lead to serious crushing injuries.
7. Keep children away from this equipment. Adults should closely supervise use by teenagers.
8. It is recommended that users receive a thorough medical exam before commencing an
exercise program. All medical issues should be reviewed to ensure that weight training will not aggravate pre-existing medical conditions.
9. If the machine appears damaged or inoperable, contact a facility staff member to place an “OUT OF ORDER, DO NOT USE” sign on the machine until it is repaired. Only use TRUE supplied replacement components to service this machine.
I
10. when using this equipment.
11. Do not attempt to free any jammed assemblies by yourself as this may cause injury.
12. On Plate Loaded and Free Weight machines:
12a. Use of spotter(s). Instruct users to seek the advice of the facility staff as to the
nstruct users not to wear loose or dangling clothes or have headphone wires hanging
appropriate use of spotters when lifting. More than one spotter may be required
depending upon the amount of weight being lifted.
12b. Instruct users to load weight plates evenly and carefully to avoid tipping equipment and crushing injuries. 12c. If the machine is equipped with safety stops or catches, inspect them and verify their
proper operation before use and make sure they are securely in place before using or
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
CHAPTER 1: SAFETY INSTRUCTIONS
12d. This equipment is designed for standard olympic size weight plates with a 50mm bore
S
AFETY
(1.9”).
12e. Do not exceed the maximum weight capacity of the machine. Maximum plate size is
13. On Selectorized and Cable equipped machines:
I
NSTALLATION SAFETY PRECAUTIONS
45 lbs. (25 kg.).
13a. Do not allow users to perform any exercise by holding the end of the cable and/or the
cable end fitting. Use only appropriate handles or attachments properly connected to the cable end.
13b. Do not high-pin or double-pin the weight stack. Do not allow the machine to be used if
the top plate or weight stack is pinned in a raised position. Use an assistant and carefully return the machine to the proper position with the cap plate resting on the top weight. Inspect the entire length of the cable to ensure that it is properly seated in all of the pulley grooves.
13c. Do not allow the use of weight plates or dumbbells to be used as a means to add
additional weight to the weight stacks. Use only the TRUE adder weight system specifically designed for the machine.
Strength
Atlas 200/201
1. Read this installation manual entirely before assembling this equipment.
2. Verify that there is adequate space surrounding this piece of equipment for safe access and
operation. Installation must meet ADA requirements for accessibility.
3. Install this piece of equipment on a solid level surface that does not deviate more than 1/8” over a 10’ distance (or as defined and required by local building and architectural codes.)
4. TRUE strongly recommends that all equipment be anchored to the floor to prevent movement and increase stability.
Due to the wide variation of flooring on which the unit can be installed, contact a qualified contractor to determine an appropriate fastening system for your floor.
Use 3/8” diameter hardware (10 mm) to anchor the machine. Anchors should have a minimum pull out force of 220 lb (110 kg) for each position.
When attaching the machine to the floor, if there is a gap between the machine foot and the floor, do not use the anchor to remove the gap as this can cause the machine frame to deform. Instead, place a shim between the bottom of the foot and the floor, then tighten the anchor.
Anchoring holes are provided on the feet of the frame. All anchoring locations must be used when anchoring the equipment to the floor.
5. DO NOT install any fitness equipment near a pool, hot tub or other damp locations. Corrosion caused by installation in these locations can lead to premature failure of components.
6. Be sure all hardware is tight before using this machine.
7. Some assembly materials may come preassembled in the carton. Refer to Chapter 2: Assembly Guide for instructions on disassembling assembly materials where appropriate before beginning assembly.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
S
AFETY
CHAPTER 1: SAFETY INSTRUCTIONS
M
AINTENANCE SAFETY PRECAUTIONS
1. Refer to the maintenance schedule table in this manual for when to perform maintenance.
2. Check the function of your machine DAILY by verifying the following:
If equipped with cables, inspect cables and end fittings for any signs of wear. Replace if worn, frayed, or damaged with TRUE replacement components.
Verify that all adjustments are possible and carried out with ease. Make sure that each adjustment pin inserts completely into each position without binding.
Verify that safety catches and stops are in proper working order and engaged.
Verify that the exercise is performed smoothly, free of noise, and/or binding.
If equipped with a weight stack, verify that the proper weight selector pin is in place.
3. Check the function of your machine WEEKLY by verifying the following:
Nuts, Bolts, and Fasteners: check tightness weekly. If any hardware has become loose, retighten it, use Loctite
Threadlocker 242, or both.
Strength
Atlas 200/201
Frames and Lifting Arms: Inspect weekly for integrity and function. Replace any component at first signs of wear. Use only TRUE supplied components.
4. Replace any warning label at the first sign of wear. Labels and the facility safety sign may be obtained from TRUE.
B
OLT LENGTH MEASURING GUIDE
FLAT HEAD SCREW
BUTTON HEAD SCREW
HEX HEAD SCREW
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
SOCKET HEAD SCREW
1
23
4
5
IMPORTANT
Preventative maintenance is crucial to maintaining the function and safety of this equipment. Your
G
ENERAL CARE AND
M
AINTENANCE
facility must establish written guidelines for preventative maintenance and keep written or online records of the maintenance performed on these products. As a minimum, the items presented in the SAFETY section of this document and the items that follow here, should be included in your maintenance program.
Strength
Atlas 200/201
CHAPTER 1: SAFETY INSTRUCTIONS
1. Cables (If equipped): inspect end fittings daily for wear. Inspect the entire length of the cable weekly. Replace cables at the first sign of wear and on an annual basis. If the cable tension has been adjusted, be certain that the cable nut is tight.
2. Nuts, Bolts, and Fasteners: check tightness weekly. If any hardware has become loose, retighten and/or use Loctite
using the machine.
3. Safety Catches: inspect catches, stop rods and their associated fasteners weekly. Tighten any loose hardware and replace any components at first signs of wear.
4. Frames: sweat, disinfecting sprays and spills can lead to corrosion which may lead to premature failure of components. Wipe all machines down with a damp cloth and dry completely each day. This includes painted parts, chrome parts and upholstered pads.
5. Painted and chrome plated parts: use Simple Green with a dilusion of 32:1 or similar cleaner for light dirt and grime. Use Turtle Wax Polishing Compound or a good car polish to remove heavier dirt and grease as well as for polishing. DO NOT use solvents, lacquer thinner, acetone or finger nail polish remover. For scuffs and marks that are not removed by the above methods use a soft scrub cleanser. Make sure all parts are dry upon completion.
6. Weight stack enclosures (shrouds)(If Equipped): wipe down with a damp cloth as needed.
7. Exercise instruction labels: clean with soap and water as needed.
8. Guide rods (If equipped): wipe all dirt and dust from th
application of Tri-Flow then wipe the guide rods with the rag. DO NOT use oil lubricants such as WD-40. Caution: Tri-
TM
Flow
9. Bronze bushings: check monthly for signs of wear and replace as needed.
10. Linear Bearing Shafts: wipe any accumulation of dust or other contaminants from the
shafts on a weekly basis. Apply a thin layer of a Teflon TRUE recommends Magnalube
11. When replacing any component, use only TRUE supplied parts.
12. Be sure all hardware is tight before using the machine.
will stain carpet and clothing.
TM
brand Threadlocker 242. Be sure all hardware is tight before
TM
or other teflon spray lubricant. Spray the Tri-FlowTM on a rag and
® brand.
e guide rods before applying a light
® (PTFE) grease on a weekly basis.
Retain these instructions for future reference.
If you have any questions, do not hesitate to contact your TRUE dealer or TRUE Fitness Technology
at (800)883-8783 or service@truefitness.com.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
ANCHORING
CHAPTER 1: SAFETY INSTRUCTIONS
0RXQWLQJ
$
KROH IRU >PP@ KDUGZDUH
63
108“
Strength
Atlas 200/201
1. Install this piece of equipment on a solid level surface that does not deviate more then 1/8” mm] over a 10’ [305 cm] distance (or as defined and required by local building and
[3 architectural codes.
2. Paramount strongly recommends that all equipment be anchored to the floor to prevent
movement and increase stability.
3. Paramount is not responsible for the actual anchoring of equipment. Due to the wide
variation of flooring on which the unit may be installed, contact a qualified contractor that is familiar with the building to determine an appropriate fastening system for your floor.
4. Use 3/8” (10 mm) diameter hardware to anchor the machine. Anchors should have a
minimum tensile force of 500 pounds [227 kg] and a minimum pull out force of 220 lbs (100 kgs) for each position.
5. When attaching the machine to the floor, if there is a gap between the machine foot and
the floor, do not use the anchor to remove the gap as this can cause the machine frame to deform. Instead, adjust the foot down to the floor, then anchor.
6. Four anchoring holes are provided on the leveling feet as shown above. A miniumum of one anchor should be used at each foot on the column assemblies as illustrated above. Install the anchors after the Paramount Zone
TM
has been installed and positioned in the room.
7. DO NOT allow the machine to be used if it is not sitting solidly on the floor at all leveling feet
locations.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
CHAPTER 1: SAFETY INSTRUCTIONS
COMMERICAL MAINTENANCE SCHEDULE
DAILY WEEKLY MONTHLY 6 MONTHS ANNUALLY
Strength
Atlas 200/201
INSPECT: Cables for wear, tension, and proper connection if equipped.
INSPECT: All nuts and bolts and tighten if needed.
INSPECT: All anti-slip surfaces and replace as needed.
INSPECT: All adjustment pins, weight stack pins, set screws, gas shocks, snap links, and pulleys if equipped.
INSPECT: All accessory bars and handles. X
INSPECT: All safety and instructional decals.
INSPECT: All weight stack shields if equipped.
CLEAN: Guide rods and lubricate with a teon lubricant if equipped.
CLEAN: Upholstery X
X
X
X
X
X
X
X
LUBRICATE: Pivot bearings and linear bearings.
REPLACE: Cables if equipped. X
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
X
Page # 10 of 53
Strength
Atlas 200/201
CHAPTER 2: ASSEMBLY GUIDE
CHAPTER 2: ASSEMBLY GUIDE
MACHINE SPECIFICATIONS:
Features
Weight of assembled machine: 493.8 lb. (223.98 kg.) for XFT-200 and 494.1 lb. (224.12 kg.) for XFT-201.
Floor loading:
For machine weight without counterweights and free weights, it is 267 lb/2 (1304 kg/m)
Maximum user weight is 400 lb. (182 kg.)
Note: e following dimensions do not include the required functional trainer (XFT-100, FS-100, XFT-900, FT­900, or Half Rack) attached to the center column assembly or optional attachments listed in this manual.
63“
108“
95“
COMPLIANCES:
is equipment complies with all tness product standards. For a complete list of compliances, please visit www. TrueFitness.com.
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 11 of 53
CHAPTER 2: ASSEMBLY GUIDE
REQUIRED TOOLS:
Strength
Atlas 200/201
Ratchet Handle
Socket Head
9/16”
1/2”
Hex Bit Socket
5/16”
1/4”
9/16” wrench and 1/2 wrench” OR Open Ended wrench
LABELS:
Allen wrench (supplied):
5/16”
1/4”
Rubber Mallet
Step Ladder
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 12 of 53
CHAPTER 2: ASSEMBLY GUIDE
PRE-ASSEMBLY CHECKLIST:
XFT-200/201 Carton One Contents
Strength
Atlas 200/201
Note: Hardware item numbers on the tooling card may not match the hardware item numbers shown in the owner’s manual.
Note: Either the XFT-100/FS-100 or XFT-900/FT-900 Attachment Brackets will be used based on whether you order the XFT-100, FS­100, XFT-900, or FT-900.
Item Part Number Description Quantity
1 XFT200-CLM160X Rack Station 1 2 XFT200-CLM110X Center Column Assembly 1 3 XFT000-ATT100X XFT-100/FS-100
Attachment Bracket
4 XFT000-ATT900X XFT-900/FT-900
Attachment Bracket
5 XFT-MDR Medicine Ball Ring 5
2
2
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 13 of 53
CHAPTER 2: ASSEMBLY GUIDE
PRE-ASSEMBLY CHECKLIST:
XFT-200 Carton Two Contents
Strength
Atlas 200/201
Note: Hardware item numbers on the tooling card may not match the hardware item numbers shown in the owner’s manual.
Item Part Number Description Quantity
1 XFT000-CBR000X Strap Rack 1 2 XFT000-KBR010X XFT-200/201 Tray 2 3 XFT000-CLM130X Tall End Column 1
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 14 of 53
CHAPTER 2: ASSEMBLY GUIDE
PRE-ASSEMBLY CHECKLIST:
XFT-201 Carton Two Contents
Strength
Atlas 200/201
Note: Hardware item numbers on the tooling card may not match the hardware item numbers shown in the owner’s manual.
Item Part Number Description Quantity
1 XFT000-KBR010X XFT-200/201 Tray 3 2 XFT000-CLM120X Short End Column 1
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 15 of 53
CHAPTER 2: ASSEMBLY GUIDE
PRE-ASSEMBLY CHECKLIST:
XFT-200/201 Cartons ree, Four, and Five Contents
Strength
Atlas 200/201
Note: Hardware item numbers on the tooling card may not match the hardware item numbers shown in the owner’s manual.
Item Carton Part Number Description Quantity
1 3 XFT-DIP Dip Station 1 2 4 XFT-RRC Battle Rope Hanger
Assembly
3 5 XFT-SPL Step Platform 1
1
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truetness.com
Page # 16 of 53
Loading...
+ 37 hidden pages