True TR1RPT-1HG-1HS-1S User Manual
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Specification Series
TR Series
Combo Front Half Doors/
Solid Rear Door Pass-Thru Model
Combo Front Half Doors/Solid Rear
Door Deep Pass-Thru Refrigerator
SPECIFICATIONS / FEATURES
DOORS:
• Glass doors: Double pane, “Low-E”, thermal insulated glass. Glass assembly
within extruded aluminum frame, with reinforcing backing plates in each
corner. Glass assembly replaceable without removing the door from
hinges. Lifetime guaranteed adjustable torsion type closure system with
aluminum block supports. The face of each door fitted with a 15" long
handle of same material as door frame.
Solid doors: 300 series stainless steel exterior with 300 series stainless
steel interior to match cabinet liner. Doors extend full width of cabinet
shell. Door gaskets of one piece construction. The face of each door
fitted with a 12" long recessed handle with interlock (lifetime guarantee
on all handles and door hardware). Handles are foamed-in-place to insure
permanent attachment.
• Lifetime guaranteed adjustable torsion type closure system with extruded
aluminum and stainless steel supports.
INSULATION:
• Entire cabinet structure and solid doors insulated using foamed-in-place
CFC free polyurethane foam.
TR1RPT-1HG/1HS-1S
True introduces its latest offering designed specifically
to meet the needs of consultants.
SPECIFICATIONS / FEATURES
CABINET CONSTRUCTION:
• Exterior - 300 series stainless steel front, shroud and solid doors.
300 series stainless steel exterior ends, top, and bottom.
• Interior - 300 series stainless steel interior cabinet side walls, solid
door liner and floor. Construction of liner in accordance with NSF
standards.
• Barrel locks standard. Locks keyed alike.
• Digital exterior temperature monitor with manual defogger control,
large LED display for quick and easy temperature identification.
• Cabinet mounted on a welded, galvanized frame rail, enamel dipped
and baked for permanent bond on all surfaces, provides additional
corrosion protection. Frame rail fitted with 4" diameter polyolefin
castors, (front castors include brakes).
Remote cabinets available 14% off list
Consult factory technical service dept. for BTU information.
(condensing units supplied by others).
Printed in
U.S.A.
10/03
5
YEAR
COMPRESSOR
Exceptions:
R
E
G
N
Y
E
S
S
A
S
V
I
G
N
TR/TA/TG series only. (5% list upcharge)
APPROVALS:
SHELVING:
• Heavy gauge full or half height pilasters and tray slides/shelving factory
installed at no charge.
• Interior kit must be indicated at time of order.
Note: Tray slide sets and shelves can also be ordered individually.
• (1) interior kit option included per section at no charge.
(4) different interior kits available. See “optional accessories” section.
LIGHTING:
• Safety shielded fluorescent interior lighting. Integrated door light standard
on glass doors.
REFRIGERATION SYSTEM:
• Oversized refrigeration system factory balanced using CFC free 134A
refrigerant.
• Top mounted condensing unit.
• Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain food safe 33° to 38°F interior cabinet temperature.
• Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
ELECTRICAL CHARACTERISTICS:
• Unit completely pre-wired at factory, and ready for final connection to
a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be
included.
• A sole use circuit is required.
Curb mountable units for
Project Name:
Location:
Item #: Qty:
Model #:
❒ TR1RPT-1HG/1HS-1S
Specifications subject to change without notice.
AIA #
SIS #
115/60/1
NEMA-5-15R
31
TR-Series: Deep Pass-Thru Refrigerator (combo front half doors/solid rear door)
®
9
12
/
16
"
35
3
26
/
4
"
L - 74 cm
1
/
2
"
77"
1
83
/
4
"
D - 95 cm
H - 199 cm
Door
Swing - 68 cm
37
1
/
4
3
"
90
/
4
"
31
1
/
2
"
5"
1
1
/
4
"
29"
26
3
/
4
"
Rough-In Data
Dimensions Cord
Capacity (inches) NEMA Length Crated
Model Doors (Cu. Ft) L D† H* HP Volts PH Amps Config. (feet) Weight
TR1RPT-1HG/1HS-1S
* Height does not include 5” for castors or 6” for optional legs.
† Depth does not include 1 3/8” for glass door handle.
3 31 29 37 1/4 78 1/4 1/3 115 1 9.4 5-15 9 N/A
Specifications subject to change without notice.
Standard Features____________________________________________________________________________________________
• Oversized and balanced, environmentally
friendly 134A refrigeration system - holds
food safe 33°F to 38°F.
• Exterior - 300 series stainless steel front,
solid doors, sides, top and bottom (the
finest stainless available).
• Interior - 300 series stainless steel side
walls, solid door liner & floor.
• Recessed handles on solid doors (lifetime
guaranteed).
• Door locks standard.
• Exterior mounted digital electronic
thermometer with manual defogger.
• Fluorescent interior lighting; patented,
integrated door light (IDL) standard on
glass doors.
• Wide door openings.
• Glass condensate pan to prevent
electrolysis.
• Magnetic door gaskets.
• Epoxy coated evaporator.
• (1) interior kit option included per section
at no charge. (4) different interior kits
available.
• Pilasters and tray slides/shelving factory
installed at no charge. Kit selection must
be indicated at time of order.
• Extruded, aluminum door frames on swing
glass doors.
• Energy efficient “Low-E” thermal glass
doors.
• 4" diameter swivel castors standard
equipment - locking castors provided for
front set.
• Hot gas condensate for energy efficiency.
• Positive seal self-closing doors with factory
tested (over 1,000,000 times) lifetime
guaranteed door hinges and torsion type
closure system.
• Foamed-in-place polyurethane high density
cell insulation (CFC free).
• Top mounted unit positioned out of food
zone to maximize storage capacity.
KCL
Model Front Right Plan 3D
TR1RPT-1HG/1HS-1S
TFQX68E TFT006S TFT001P TFT0063
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
• Self-contained system.
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty (USA).
Optional Accessories ______________
❒ 6" stainless steel legs.
❒ Seismic/Flanged legs.
❒ Kit #1 (9 sets of #1 type tray slides).
❒ Kit #2 (rod type 1 set covers 1/2 section).
❒ Kit #3 (6 sets of universal type tray slides).
❒ Kit #4 (3 chrome shelves and shelf supports)
❒ Stainless steel (electro polished) shelves.
❒ Chrome shelves.
❒ Metal handle (solid doors only).
❒ Electronic temperature control.
❒ Universal pan slides.
❒ #1 pan slides.
❒ #2 or rod style pan slides.
❒ Curb mountable units.
❒ Export units available - consult factory.
❒ Correctional facility options - consult factory.
❒ Remote units available (contact factory
technical services for BTU information).
R
E
G
N
Y
YEAR
COMPRESSOR
5
E
S
S
A
S
V
I
G
N
Printed in U.S.A.
Loading...