True TR1HRI-1S User Manual

TRUE FOOD SERVICE

EQUIPMENT, INC.

St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366

[phone] • FAX [phone] • [phone] • www.truemfg.com

Parts Dept. (800)424-TRUE • Parts Dept. FAX# [phone]

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

Model:

TR1HRI-1S

TR Specication Series:

Roll-In Solid Door Heated Cabinet

TR1HRI-1S

Provides cabinet holding
temperature of 80˚F to 180˚F
(26.67˚C to 82.22˚C).

Internal fan provides low velocity,
forced-air heat distribution
to assure even temperatures
throughout the cabinet.

(2) stainless steel 1000 watt
nned tube heating elements per
section for uniform generation of
electric heat. Cabinet comes with
a total of 2000 watts.

300 series stainless steel exterior
front and interior. The very nest
stainless; higher tensile strength
for fewer dents and scratches.

(3) lifetime guaranteed, cam-lift
hinges per door. Full 180 degree
open capability with a stay open
feature at 120 degrees.

Designed to accept roll-in racks
(inboard castors) with a maximum
dimensions of 27"L x 29"D x 66"H
(686 mm x 737 mm x 1677 mm).
(1) heavy gauge stainless steel
ramp standard per door.

Entire cabinet structure and
solid door is foamed-in-place
using high density, CFC free,
polyurethane insulation.

ROUGH-IN DATA

Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).

Cabinet Dimensions

Capacity

Model

Solid

Doors

(Cu. Ft.)

(liters)

TR1HRI-1S 1 37

1048

* Height does not include 1" (26 mm) for system mechanical components.  Plug type varies by country.
Requires 115/208 -240/60 Hz, single phase, 3 pole, 4 wire circuit.

(inches)

(mm)

L D H*

35

889

34 1/2

877

83 3/4

Watts Voltage Amps

2000 115/208-240/1 8.3 14-20P

2128

Specications subject to change without notice.

Crated

NEMA

Cong.



Cord Length

(total ft.)

(total m)

9

2.74

Weight

(lbs.)

(kg)

325

148

N

E

S

A

V

3/04

R

E

G

Y

S

S

I

G

N

R

Printed in U.S.A.

®

C

APPROVALS:

US

Model:

TR1HRI-1S

TR Specication Series:

Roll-In Solid Door Heated Cabinet

STANDARD FEATURES

DESIGN

•

True’s solid door roll-in heated
cabinets are designed with enduring
quality that protects your long term
investment.

HEATER SYSTEM

•

Cabinet is designed to provide
holding temperatures of 80˚F to 180˚F
(26.67˚C to 82.22˚C). Heating system
controlled by exterior on/off switch
and temperature control dial.
(2) stainless steel, nned tube heating

•
elements (1000 watts each) per section
for uniform generation of electric
heat. Cabinet comes with a total of
2000 watts.

•

Cabinet equipped with low-velocity
fan to assure even temperature
distribution throughout the cabinet.
Fans are controllable by exterior on/
off switch.

•

Manually controlled vent located
on top of the cabinet for positive
humidity control.

•

Exterior dial thermometer; accurate
direct reading of internal cabinet
temperature.

CABINET CONSTRUCTION

•

Exterior - 300 series stainless steel
door, front, back and bottom. Stainless
steel sides.
Interior- 300 series stainless steel liner

•
and oor.

Stainless steel breaker cap.

•
Insulation - entire cabinet structure

•
and solid door is foamed-in-place
using high density, CFC free,
polyurethane insulation.

•

(1) heavy gauge stainless steel ramp
standard per door.
Designed to accept roll-in racks

•
(inboard castors) with a maximum
dimensions of 27"L x 29"D x 66"H
(686 mm x 737 mm x 1677 mm).

DOORS

300 series stainless steel door liner.

•
Door opens within cabinet dimension.
Door lock standard.
(3) lifetime guaranteed, cam-lift

•
hinges per door. Full 180 degree open
capability with a stay open feature at
120 degrees.

•

Lifetime guaranteed recessed door
handle. Each door tted with 12"
(305 mm) long recessed handle that
is foamed-in-place with a sheet
metal interlock to insure permanent
attachment.

•

Magnetic door gasket of one piece
construction, removable without tools
for ease of cleaning.
Door is eld reversible.

•

LIGHTING

Incandescent interior lighting; safety

•
shielded.

MODEL FEATURES

True heated cabinets are designed

•
to hold warm baked or cooked food.
Cabinets are not designed to heat
ambient or cold product.

ELECTRICAL

Unit completely pre-wired at factory

•
and ready for nal connection to a
115/208-240/60 Hz. Single phase - 20
amp dedicated outlet.

•

Cord and plug set included.

115/208-240/1
NEMA-14-20R

OPTIONAL FEATURES/ACCESSORIES

 Metal door handle.
 Export units - consult factory.

Prison package options - consult



factory.

Remote cabinets (condensing units



supplied by others), consult factory
technical service department for BTU
information.

PLAN VIEW

35"

(889 mm)

347/16

3

/

83

4"

(2128 mm)

843/4"

(2153 mm)

TOP VIEW

TFQY82E

WARRANTY

One year warranty on all parts

& labor (U.S.A. only)

FRONT VIEW

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

KCL

Model Front Side Plan 3D

TR1HRI-1S

TRUE FOOD SERVICE EQUIPMENT

St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • FAX [phone] • [phone] • www.truemfg.com

(875 mm)

30"

(762 mm)

TFQY51S

"

647/16"

(1637 mm)

TFQY51P

TFQY823