True TG2RPT-4HG-2S User Manual

TRUE FOOD SERVICE EQUIPMENT, INC.

St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366

(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com

Specification Series

TG Series

Glass Front Half Doors/

Solid Rear Doors Pass-Thru Model

Glass Front Half Doors/Solid Rear

Doors Deep Pass-Thru Refrigerator

SPECIFICATIONS / FEATURES

DOORS:

• Glass doors: Double pane, “Low-E”, thermal insulated glass. Glass assembly within extruded aluminum frame, with reinforcing backing plates in each corner. Glass assembly replaceable without removing the door from hinges. Lifetime guaranteed adjustable torsion type closure system with aluminum block supports. The face of each door fitted with a 15" long handle of same material as door frame.

Solid doors: 300 series stainless steel exterior with 300 series stainless steel interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction. The face of each door fitted with a 12" long recessed handle with interlock (lifetime guarantee on all handles and door hardware). Handles are foamed-in-place to insure permanent attachment.

• Lifetime guaranteed adjustable torsion type closure system with extruded aluminum and stainless steel supports.

INSULATION:

• Entire cabinet structure and solid doors insulated using foamed-in-place CFC free polyurethane foam.

TG2RPT-4HG-2S

True introduces its latest offering designed specifically

to meet the needs of consultants.

SPECIFICATIONS / FEATURES

CABINET CONSTRUCTION:

• Exterior - 300 series stainless steel front, shroud, solid doors & bottom. Anodized quality aluminum finished ends and top.

• Interior - NSF approved, white vinyl coated aluminum interior side walls. 300 series stainless steel interior solid door liner and 300 series stainless steel floor. Construction of liner in accordance with NSF standards.

• Barrel locks standard. Locks keyed alike.

• Digital exterior temperature monitor with manual defogger control, large LED display for quick and easy temperature identification.

• Cabinet mounted on a welded, galvanized frame rail, enamel dipped and baked for permanent bond on all surfaces, provides additional corrosion protection. Frame rail fitted with 4" diameter polyolefin castors, (front castors include brakes).

model pictured with optional shelving.

SHELVING:

• (3) heavy duty, vinyl coated wire shelves per section (shipped separately). (3) different interior kits available. See “optional accessories” section. (field installation required).

• Optional interior kit must be indicated at time of order. Note: Tray slide sets and shelves can also be ordered individually.

LIGHTING:

• Safety shielded fluorescent interior lighting. Integrated door light standard on glass doors.

REFRIGERATION SYSTEM:

• Oversized refrigeration system factory balanced using CFC free 134A refrigerant.

• Top mounted condensing unit.

• Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain food safe 33° to 38°F interior cabinet temperature.

• Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.

ELECTRICAL CHARACTERISTICS:

• Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.

• A sole use circuit is required.

Project Name:

Location:

Item #: Qty:

Model #:

❒ TG2RPT-4HG-2S

115/60/1 NEMA-5-15R

AIA #

SIS #

Remote cabinets available 14% off list (condensing units supplied by others).

Consult factory technical service dept. for BTU information.

Printed in

U.S.A.

10/03

YEAR

COMPRESSOR

Exceptions:

APPROVALS:

Curb mountable units for

TR/TA/TG series only. (5% list upcharge)

Specifications subject to change without notice.

TG-Series: Deep Pass-Thru Refrigerator (glass front half doors/solid rear doors)

L - 131 cm D - 95 cm

H - 199 cm

/2"

Door Swing - 61 cm

77"

/2"

Rough-In Data

Dimensions Cord

Capacity (inches) NEMA Length Crated Model Doors (Cu. Ft) L D † H* HP Volts PH Amps Config. (feet) Weight TG2RPT-4HG-2S 6 56 51 3/8 37 1/4 78 1/4 1/2 115 1 13.1 5-15 9 N/A

* Height does not include 5” for castors or 6” for optional legs. † Depth does not include 1 3/8” for glass door handle.

Standard Features____________________________________________________________________________________________

• Oversized and balanced, environmentally friendly 134A refrigeration system - holds food safe 33°F to 38°F.

• Exterior - 300 series stainless steel exterior solid doors, front and bottom (the finest stainless available). Anodized quality aluminum sides and top.

• Interior - NSF approved, white vinyl coated aluminum sides. 300 series stainless floor and solid door liner.

• Recessed handles on solid rear doors (lifetime guaranteed).

• Glass half-doors allow product segmentation and high visibility for easy access.

• Door locks standard.

• Exterior mounted digital electronic

thermometer with manual defogger.

• Fluorescent interior lighting; patented, integrated door light (IDL) standard on glass doors.

• Wide door openings.

• Glass condensate pan to prevent

electrolysis.

• Magnetic door gaskets.

• Epoxy coated evaporator.

• (3) heavy duty, vinyl coated shelves per

section (shipped separately) (3) different interior kits available. Kit selection must be indicated at time of order. (field installation required).

• Extruded, aluminum door frames on swing glass doors.

• Double pane, “Low-E” thermal insulated glass front doors.

• 4" diameter swivel castors standard equipment - locking castors provided for front set.

• Hot gas condensate for energy efficiency.

• Positive seal self-closing doors with factory

tested (over 1,000,000 times) lifetime guaranteed door hinges and torsion type closure system.

• Foamed-in-place polyurethane high density cell insulation (CFC free).

Specifications subject to change without notice.

• Top mounted unit positioned out of food zone to maximize storage capacity.

• Self-contained system.

• 1 year parts & labor warranty (USA).

• 5 year compressor warranty (USA).

Optional Accessories ______________

❒ 6" stainless steel legs. ❒ Seismic/Flanged legs. ❒ Kit #1 (9 sets of #1 type tray slides). ❒ Kit #2 (rod type 1 set covers 1/2 section). ❒ Kit #3 (6 sets of universal type tray slides). ❒ Kit #4 (3 chrome shelves and shelf supports) ❒ Stainless steel (electro polished) shelves. ❒ Chrome shelves.

❒ Metal handle (solid doors only).

❒ Electronic temperature control. ❒ Universal pan slides. ❒ #1 pan slides. ❒ #2 or rod style pan slides. ❒ Curb mountable units. ❒ Export units available - consult factory. ❒ Correctional facility options - consult factory. ❒ Remote units available (contact factory

technical services for BTU information).

KCL

St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com

Model Front Right Plan 3D TG2RPT-4HG-2S

TRUE FOOD SERVICE EQUIPMENT

YEAR

COMPRESSOR

Printed in U.S.A.