True TG1R-1HG-1HS User Manual

TRUE FOOD SERVICE EQUIPMENT, INC.

St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366

(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com

Specification Series

TG (Deep Reach-In) Series

Combination Door Model

Combination Half Solid/Half Glass Door Deep Reach-In Refrigerators

SPECIFICATIONS / FEATURES

DOORS:

• Glass doors: Double pane, “Low-E”, thermal insulated glass. Glass assembly within extruded aluminum frame, with reinforcing backing plates in each corner. Glass assembly replaceable without removing the door from hinges. Lifetime guaranteed adjustable torsion type closure system with aluminum block supports. The face of each door fitted with a 15" long handle of same material as door frame.

Solid doors: 300 series stainless steel exterior with 300 series stainless steel interior door liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction. The face of each door fitted with a 12" long recessed handle with interlock (lifetime guarantee on all handles and door hardware). Handles are foamed-in-place to insure permanent attachment.

• Lifetime guaranteed adjustable torsion type closure system with extruded aluminum and stainless steel supports.

INSULATION:

• Entire cabinet structure and solid doors insulated using foamed-in-place CFC free polyurethane foam.

SHELVING:

TG1R-1HG/1HS

True introduces its latest offering designed specifically

to meet the needs of consultants.

• (3) heavy duty, vinyl coated wire shelves per section (shipped separately). (3) different interior kits available. See “optional accessories” section. (field installation required).

• Optional interior kit must be indicated at time of order. Note: Tray slide sets and shelves can also be ordered individually.

Project Name:

Location:

Item #: Qty:

Model #:

❒ TG1R-1HG/1HS

AIA #

SIS #

SPECIFICATIONS / FEATURES

CABINET CONSTRUCTION:

• Exterior - 300 series stainless steel front, shroud, solid doors & bottom. Anodized quality aluminum finished ends, top and back.

• Interior - NSF approved, white vinyl coated aluminum interior side walls and back. 300 series stainless steel interior door liner (solid door) and 300 series stainless steel floor. Construction of liner in accordance with NSF standards.

• Barrel lock standard.

• Digital exterior temperature monitor with manual defogger control, large LED display for quick and easy temperature identification.

• Cabinet mounted on a welded, galvanized frame rail, enamel dipped and baked for permanent bond on all surfaces, provides additional corrosion protection. Frame rail fitted with 4" diameter polyolefin castors, (front castors include brakes).

Remote cabinets available 14% off list

Consult factory technical service dept. for BTU information.

(condensing units supplied by others).

Printed in

U.S.A.

10/03

YEAR

COMPRESSOR

Exceptions:

TR/TA/TG series only. (5% list upcharge)

APPROVALS:

LIGHTING:

• Safety shielded fluorescent interior lighting. Integrated door light standard on glass doors.

REFRIGERATION SYSTEM:

• Oversized refrigeration system factory balanced using CFC free 134A refrigerant.

• Top mounted condensing unit.

• Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain food safe 33° to 38°F interior cabinet temperature.

• Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.

ELECTRICAL CHARACTERISTICS:

• Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.

• A sole use circuit is required.

115/60/1 NEMA-5-15R

Curb mountable units for

Specifications subject to change without notice.

TG-Series: Deep Reach-In Refrigerator (combo half doors)

29"

L - 74 cm D - 89 cm H - 199 cm Door Swing - 68 cm

77"

Rough-In Data

Dimensions Cord

Capacity (inches) NEMA Length Crated Model Doors (Cu. Ft) L D† H* HP Volts PH Amps Config. (feet) Weight TG1R-1HG/1HS 2 31 29 34 3/4 78 1/4 1/3 115 1 9.0 5-15 9 465

* Height does not include 5” for castors or 6” for optional legs. † Depth does not include 1 3/8” for glass door handle.

Specifications subject to change without notice.

Standard Features ____________________________________________________________________________________________

• Oversized and balanced, environmentally friendly 134A refrigeration system - holds food safe 33°F to 38°F.

• Exterior - 300 series stainless steel front, solid doors & bottom. Anodized quality aluminum finished ends, back & top.

• Interior - NSF approved, white vinyl coated aluminum sides. 300 series stainless floor and door liner (solid door).

• Double pane, “Low-E” thermal insulated glass doors.

• 300 series stainless steel solid doors feature recessed handles (lifetime guaranteed).

• Glass half-door allows product segmentation and high visibility for easy access.

• Exterior mounted digital electronic thermometer with manual defogger.

• Fluorescent interior lighting; patented, integrated door light (IDL) standard on glass doors.

• Door locks standard.

• Magnetic door gaskets.

KCL

St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com

Model Front Right Plan 3D TG1R-1HG/1HS

• (3) heavy duty, vinyl coated shelves per section (shipped separately) (3) different interior kits available. Kit selection must be indicated at time of order. (field installation required).

• Wide door openings.

• Glass condensate pan to prevent electrolysis.

• Epoxy coated evaporator.

• 4" diameter swivel castors standard

equipment - locking castors provided for front set.

• Hot gas condensate for energy efficiency.

• Positive seal self-closing doors with factory

tested (over 1,000,000 times) lifetime guaranteed door hinges and torsion type closure system.

• Extruded aluminum door frames on glass doors.

• Foamed-in-place polyurethane high density cell insulation (CFC free).

• Top mounted unit positioned out of food zone to maximize storage capacity.

TRUE FOOD SERVICE EQUIPMENT

• Self-contained system.

• 1 year parts & labor warranty (USA).

• 5 year compressor warranty (USA).

Optional Accessories ______________

❒ 6" stainless steel legs. ❒ Seismic/Flanged legs. ❒ Kit #1 (9 sets of #1 type tray slides). ❒ Kit #2 (rod type 1 set covers 1/2 section). ❒ Kit #3 (6 sets of universal type tray slides). ❒ Kit #4 (3 chrome shelves and shelf supports) ❒ Stainless steel (electro polished) shelves. ❒ Chrome shelves. ❒ Metal handle (solid doors only). ❒ Electronic temperature control. ❒ Universal pan slides. ❒ #1 pan slides. ❒ #2 or rod style pan slides. ❒ Curb mountable units. ❒ Export units available - consult factory. ❒ Correctional facility options - consult factory. ❒ Remote cabinets available (contact factory

technical services for BTU information).

YEAR

COMPRESSOR

Printed in U.S.A.