True TG1HRI-1S User Manual

TRUE FOOD SERVICE

T

RUE

R

EFRIGERAT ION

MADE IN

SINCE 1945

U.S.A.

®

EQUIPMENT, INC.

2001 East Terra Lane • O’Fallon, Missouri 63366
[phone] • Fax [phone] • [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

Model:

TG1HRI-1S

TG Spec Series:

Roll-In Solid Swing Door Heated Cabinet

TG1HRI-1S

Provides cabinet holding



temperature of 80°F to 180°F (26.6°C
to 82.2°C).

Equipped with low-velocity fans to



assure even temperature distribution
throughout the cabinet. Fans are
controlled by exterior on/o switch.

Two (2) stainless steel 1000 watt



nned tube heating elements per
section for uniform generation of
electric heat. Cabinet comes with a
total of 2000 watts.

300 series stainless steel doors and



front. Anodized quality aluminum
exterior sides, back and bottom.

Anodized aluminum interior cabinet



liner. 300 series stainless steel door
liner and oor with coved corners.

Three (3) lifetime guaranteed, cam-lift



hinges. Full 180° open capability with
a stay open feature at 120°.

Designed to accept roll-in racks



(inboard castors) with a maximum
dimension of 27"L x 29"D x 66"H (686
mm x 737 mm x 1677 mm). One (1)
heavy gauge stainless steel ramp
standard (per door).

Entire cabinet structure and solid



door are foamed-in-place using
Ecomate. A new, innovative, high
density, polyurethane insulation that
has zero ozone depletion potential
(ODP) and zero global warming
potential (GWP).

Rough-In Data

Model Doors

TG1HRI-1S

1 35 34½ 83¾ 2000 115/208-230/60 14-20P 9 N/A

Chart dimensions rounded up to the nearest ⁄" (millimeters rounded up to next whole number).

Cabinet Dimensions

(inches)

(mm)

Watts Voltage

Specications subject to change without notice.

NEMA

Config.

Cord

Length
(total ft.)

(total m)

Crated

Weight

(lbs.)

(kg)L D H

889 877 2128 2.74 N/A

Requires 115/208-240/60Hz, single phase, 3 pole, 4 wire circuit. Note: Two Section models requre hard wiring

ApprovAls: AvAilAble At:

9/11

Printed in U.S.A.

Model:

TG1HRI-1S

TG Spec Series:

Roll-In Solid Swing Door Heated Cabinet

StanDaRD FeatuReS

DESIGN

True’s solid door roll-in heated cabinets are

•

designed with enduring quality that protects
your long term investment.

HEATER SYSTEM

Cabinet is designed to provide holding

•

temperatures of 80°F to 180°F (26.6°C to 82.2°C).
Heating system controlled by exterior on/o
switch and temperature control dial.
Two (2) stainless steel (for corrosion resistance),

•

nned tube heating elements (1000 watts each)
for uniform generation of electric heat. Cabinet
comes with a total of 2000 watts.
Equipped with low-velocity fans to assure

•

even temperature distribution throughout the
cabinet. Fans are controlled by exterior on/o
switch.
Manually controlled vent located on top of the

•

cabinet for positive humidity control.

CABINET CONSTRUCTION

Exterior - 300 series stainless steel door(s) and

•

rainshield. Anodized quality aluminum sides,
back and bottom.
Interior - NSF approved white aluminum side

•

walls and back liner. 300 series stainless oor
with coved corners.
Stainless steel breaker caps.

•

Insulation - entire cabinet structure and solid

•

door are foamed-in-place using Ecomate. A
new, innovative, high density, polyurethane
insulation that has zero ozone depletion
potential (ODP) and zero global warming
potential (GWP).
One (1) heavy gauge stainless steel ramp.

•

Designed to accept roll-in racks (inboard

•

castors) with a maximum dimension of 27"L x
29"D x 66"H (686 mm x 737 mm x 1677 mm).

DOOR

300 series stainless steel exterior and liner. Door

•

opens within cabinet dimension.
Door lock standard.

•

Lifetime guaranteed recessed door handle.

•

Door tted with 12" (305 mm) long recessed
handle that is foamed-in-place with a
sheet metal interlock to ensure permanent
attachment.
Three (3) lifetime guaranteed, cam-lift hinges.

•

Full 180°open capability with a stay open
feature at 120°.
Magnetic door gasket(s) of one piece

•

construction, removable without tools for ease
of cleaning.
Door is eld reversible.

•

LIGHTING

Incandescent interior lighting; lights activated

•

by exterior on/o switch, safety shielded.

MODEL FEATURES

Exterior, color coded, temperature display;

•

accurate direct reading of internal cabinet
temperature.
Designed to hold warm baked or cooked food.

•

Cabinet is not designed to heat ambient or cold
product.
Interior bumpers protect cabinet walls from

•

abuse caused by roll-in carts.
12" x 20" (305 mm x 508 mm) pan for water

•

included, if additional humidity is required.
NSF-4 compliant for open food product.

•

ELECTRICAL

True requires that a sole use circuit be dedicated

•

for the unit.
Unit completely pre-wired at factory and ready

•

for nal connection to a 115/208-240/60 Hz.
single phase, 20 amp dedicated outlet. Cord
and plug set included.

OPTIONAL FEATURES/ACCESSORIES

Upcharge and lead times may apply.

Metal door handle(s) (factory installed). ❑
Electronic temperature control (factory ❑
installed).
Correctional facilities options. ❑

Plan VIew

One year warranty on all parts

WARRANTY

and labor. (U.S.A. only)

2001 East Terra Lane • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

TRUE FOOD SERVICE EQUIPMENT

KCL

Model Elevation Right Plan 3D Back

TG1HRI-1S

TFQY82E TFQY51S TFQY51P TFQY823