True TG1H-1S User Manual
TG S
ERIES
REACH-IN HEATED CABINETS
MODEL
SOLID DOORS
TG1H-1S ‡ 1 s/s 31 2000 350 29 x 34
TG2H-2S ‡ 2 s/s 56 4000 565 513/8 x 34
SOLID HALF DOORS
TG1H-2HS ‡ 2 s/s 31 2000 N/A 29 x 34
TG2H-4HS ‡ 4 s/s 56 4000 N/A 513/8 x 34
GLASS DOORS
TG1H-1G ‡ 1 gls 31 2000 N/A 29 x 34
TG2H-2G ‡ 2 gls 56 4000 N/A 513/8 x 34
GLASS HALF DOORS
TG1H-2HG ‡ 2 gls 31 2000 N/A 29 x 34
TG2H-4HG ‡ 4 gls 56 4000 N/A 513/8 x 34
† Depth does not include 13/8" for door handle on glass door models.
* Height does not include 6" for leg height or 5" for optional castors (castors available on single section
models only).
* Height does not include 1" for system mechanical components.
‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: Two section models require hard wiring.
DOORS
SWING
CU.
T.WA TTS
F
CRATE D
WEIGHT
CABINET DIME NSIONS
L D† H*
3
1
/
4
x 78
3
/
4
x 78
3
1
/
4
x 78
3
/
4
x 78
7
1
/
8
x 78
7
/
8
x 78
7
1
/
8
x 78
7
/
8
x 78
/
4
1
/
4
/
4
1
/
4
/
4
1
/
4
/
4
1
/
4
TG2H-2S
TG1H-1S
• Powerfully provides holding temperatures
of 80°F to 180°F throughout the cabinet for
uniform, forced-air, heating.
• Low velocity fan(s) provided to assure even
temperature throughout cabinet. A vent is
located at the top of the cabinet for positive
humidity control.
• Heater - stainless steel for corrosion resistance.
• Shelving - (3) heavy duty, chrome shelves
per section with wall mounted pilasters (3)
different interior kits available. See “spec.
series” accessory pages 70 or 134 for details
(field installation required).
• 300 series stainless steel solid doors and
rainshield (the finest stainless available).
Specifications subject to change without notice.
PASS-THRU HEATED CABINETS
MODEL
SOLID FRONT/SOLID REAR DOORS
TG1HPT-1S-1S ‡ 2 s/s 31 2000 400 29 x 37
TG2HPT-2S-2S ‡ 4 s/s 56 4000 600 513/8 x 37
GLASS FRONT/SOLID REAR DOORS
TG1HPT-1G-1S ‡ 1 gls - 1 s/s 31 2000 480 29 x 37
TG2HPT-2G-2S ‡ 2 gls - 2 s/s 56 4000 N/A 513/8 x 37
† Depth does not include 1
* Height does not include 6" for leg height or 5" for optional castors (castors available on single section
models only).
* Height does not include 1" for system mechanical components.
‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: Two section models require hard wiring.
True’s TG Series 1 and 2 section reach-in and pass-thru
heated cabinets can be built with any combination
of half & full doors in both stainless steel and glass.
Please contact your local True representative for
nomenclature, pricing and lead times.
DOORS
3
/8" for door handle on glass door models.
• Anodized quality aluminum sides, bottom and
back.
• Anodized aluminum interior.
• Foamed-in-place polyurethane high density
cell insulation (CFC free).
• Exterior, color coded, temperature display.
• Lifetime guaranteed recessed handles on
solid doors.
• Extruded, aluminum door frames on glass
doors.
• Door locks standard.
• Doors equipped with lifetime guaranteed
self-closing hinges with 120 degree stay
open feature standard.
• Humidity control - 12" x 20" pan standard.
All dimensions rounded up to the nearest 1/8".
SWING
CU.
F
T.WA TTS
CRATE D
WEIGHT
CABINET DIME NSIONS
L D† H*
1
1
/
4
x 78
/
1
/
4
x 78
1
1
/
4
x 78
/
1
/
4
x 78
4
1
/
4
4
1
/
4
True Heated Cabinets are
designed to hold warm
baked or cooked food.
Cabinets are not designed
to heat ambient or cold
product.
FEATURES/BENEFITS
• Manual humidity control is a standard feature (turn counterclockwise to ventilate).
• Incandescent interior lighting.
• Energy efficient, triple pane, thermal insulated glass on glass doors.
• 6" legs standard equipment. 4" diameter
swivel castors available for single section
models only.
• Pass-thru heated cabinet designed to
be rear-loaded from prep area and front
accessed.
• Self-contained system.
Curb mountable units for TR, TA & TG series only. (5% list upcharge)
Toll Free Number • 1-800-325-6152
Loading...