True TA2RPT-4HG-2G User Manual
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Specification Series
TA Series
Glass Front Half Doors/Glass Rear Doors
Pass-Thru Model
Glass Front Half Doors/Glass Rear
Doors Deep Pass-Thru Refrigerator
SPECIFICATIONS / FEATURES
DOORS:
• 300 series stainless steel exterior with 300 series stainless steel interior
door liner. Doors extend full width of cabinet shell. Door gaskets of one
piece construction.
• Lifetime guaranteed adjustable torsion type closure system with extruded
aluminum and stainless steel supports. The face of each door fitted with
a 12" long recessed handle with interlock (lifetime guarantee on all
handles and door hardware). Handles are foamed-in-place to insure
permanent attachment.
INSULATION:
• Entire cabinet structure insulated using foamed-in-place CFC free
polyurethane foam.
SHELVING:
• (3) heavy duty, vinyl coated wire shelves per section (shipped separately).
(3) different interior kits available. See “optional accessories” section.
(field installation required).
• Optional interior kit must be indicated at time of order.
Note: Tray slide sets and shelves can also be ordered individually.
TA2RPT-4HG-2G
True introduces its latest offering designed specifically
to meet the needs of consultants.
SPECIFICATIONS / FEATURES
CABINET CONSTRUCTION:
• Exterior - 300 series stainless steel front, shroud. 300 series stainless
steel exterior ends, top, and bottom.
• Interior - NSF approved, white vinyl coated aluminum interior side
walls. 300 series stainless steel floor. Construction of liner in
accordance with NSF standards.
• Barrel locks standard. Locks keyed alike.
• Digital exterior temperature monitor with manual defogger control,
large LED display for quick and easy temperature identification.
• Cabinet mounted on a welded, galvanized frame rail, enamel dipped
and baked for permanent bond on all surfaces, provides additional
corrosion protection. Frame rail fitted with 4" diameter polyolefin
castors, (front castors include brakes).
LIGHTING:
• Incandescent interior lighting. Light(s) activated by rocker switch mounted
above door(s).
REFRIGERATION SYSTEM:
• Oversized refrigeration system factory balanced using CFC free 134A
refrigerant.
• Top mounted condensing unit.
• Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain food safe 33° to 38°F interior cabinet temperature.
• Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
ELECTRICAL CHARACTERISTICS:
• Unit completely pre-wired at factory, and ready for final connection to
a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be
included.
• A sole use circuit is required.
Project Name:
Location:
Item #: Qty:
Model #:
❒ TA2RPT-4HG-2G
115/60/1
NEMA-5-15R
AIA #
SIS #
Remote cabinets available 14% off list
(condensing units supplied by others).
Consult factory technical service dept. for BTU information.
Printed in
U.S.A.
10/03
5
YEAR
COMPRESSOR
Exceptions:
R
E
G
N
Y
E
APPROVALS:
S
S
A
S
V
I
G
N
Curb mountable units for
TR/TA/TG series only. (5% list upcharge)
Specifications subject to change without notice.
12
TA-Series: Deep Pass-Thru Refrigerator (glass front half doors/glass rear doors)
®
5
/
8
"
9
/
16
"
35
23
L - 131 cm
D - 95 cm
84
1
/
2
"
H - 199 cm
31
1
/2"
Door
Swing - 61 cm
37
1
/
4
"
77"
1
/
4
"
83
5
/
8
"
23
31
1
/2"
51
3
/
8
"
5"
1
1
/
4
"
Rough-In Data
Dimensions Cord
Capacity (inches) NEMA Length Crated
Model Doors (Cu. Ft) L D† H* HP Volts PH Amps Config. (feet) Weight
TA2RPT-4HG-2G 6 56 51 3/8 37 1/4 78 1/4 1/2 115 1 11.1 5-15 9 N/A
* Height does not include 5” for castors or 6” for optional legs.
† Depth does not include 1 3/8” for glass door handle (front and back).
Standard Features____________________________________________________________________________________________
• Oversized and balanced, environmentally
friendly 134A refrigeration system - holds
food safe 33°F to 38°F.
• Exterior - 300 series stainless steel exterior
front, sides, top, bottom and back (the
finest stainless available).
• Interior - NSF approved, white vinyl coated
aluminum sides. 300 series stainless floor.
• Door locks standard.
• Exterior mounted digital electronic
thermometer with manual defogger.
• Fluorescent interior lighting; patented,
integrated door light (IDL) standard.
• Wide door openings.
• Glass condensate pan to prevent
electrolysis.
• Magnetic door gaskets.
• Epoxy coated evaporator.
• Hot gas condensate for energy efficiency.
• Extruded, aluminum door frames on
swing glass doors.
• Energy efficient “Low-E” thermal glass
doors.
• (3) heavy duty, vinyl coated shelves per
section (shipped separately) (3) different
interior kits available. Kit selection must
be indicated at time of order.
(field installation required).
• 4" diameter swivel castors standard
equipment - locking castors provided for
front set.
• Positive seal self-closing doors with factory
tested (over 1,000,000 times) lifetime
guaranteed door hinges and torsion type
closure system.
• Foamed-in-place polyurethane high density
cell insulation (CFC free).
• Top mounted unit positioned out of food
zone to maximize storage capacity.
• Self-contained system.
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty (USA).
Specifications subject to change without notice.
Optional Accessories ______________
❒ 6" stainless steel legs.
❒ Seismic/Flanged legs.
❒ Kit #1 (9 sets of #1 type tray slides).
❒ Kit #2 (rod type 1 set covers 1/2 section).
❒ Kit #3 (6 sets of universal type tray slides).
❒ Kit #4 (3 chrome shelves and shelf supports)
❒ Stainless steel (electro polished) shelves.
❒ Chrome shelves.
❒ Electronic temperature control.
❒ Universal pan slides.
❒ #1 pan slides.
❒ #2 or rod style pan slides.
❒ Curb mountable units.
❒ Export units available - consult factory.
❒ Correctional facility options - consult factory.
❒ Remote units available (contact factory
technical services for BTU information).
KCL
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Model Front Right Plan 3D
TA2RPT-4HG-2G
TRUE FOOD SERVICE EQUIPMENT
YEAR
COMPRESSOR
R
E
G
N
Y
5
E
S
S
A
S
V
I
G
N
Printed in U.S.A.
Loading...