True TA2DT-2S User Manual
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Specification Series
TA-Series - Dual Temperature
Reach-In Refrigerator/Freezer
SPECIFICATIONS / FEATURES
DOORS:
• 300 series stainless steel exterior with 300 series stainless steel interior
door liner. Doors extend full width of cabinet shell. Door gaskets of one
piece construction.
• Lifetime guaranteed adjustable torsion type closure system with extruded
aluminum and stainless steel supports. The face of each door fitted with
a 12" long recessed handle with interlock (lifetime guarantee on all
handles and door hardware). Handles are foamed-in-place to insure
permanent attachment.
INSULATION:
• Entire cabinet structure and doors insulated using foamed-in-place CFC
free polyurethane foam.
SHELVING:
• (3) heavy duty, vinyl coated wire shelves per section (shipped separately).
(3) different interior kits available. See “optional accessories” section.
(field installation required).
• Optional interior kit must be indicated at time of order.
TA2DT-2S
True introduces its latest offering designed specifically
to meet the needs of consultants.
SPECIFICATIONS / FEATURES
CABINET CONSTRUCTION:
• Exterior - 300 series stainless steel front, shroud and doors. 300 series
stainless steel exterior ends, top, back, and bottom.
• Interior - NSF approved, white vinyl coated aluminum interior side
walls and back. 300 series stainless steel interior door liner and 300
series stainless steel floor. Construction of liner in accordance with
NSF standards.
• Barrel lock standard for each door. Locks keyed alike.
• Dual, digital exterior temperature monitors with manual defogger
control, large LED display for quick and easy temperature
identification.
• Cabinet mounted on a welded, galvanized frame rail, enamel dipped
and baked for permanent bond on all surfaces, provides additional
corrosion protection. Frame rail fitted with 4" diameter polyolefin
castors, (front castors include brakes).
Note: Tray slide sets and shelves can also be ordered individually.
• Standard backguard in freezer compartment improves airflow.
LIGHTING:
• Compartmentalized, incandescent interior lighting (one for each door).
Lights activated by rocker switch mounted above door(s).
REFRIGERATION SYSTEM:
• Two independent, self-contained refrigeration systems CFC free
environmentally friendly and factory balanced. 134A refrigerator (left
side) refrigerant - R404A freezer (right side) refrigerant.
• Top mounted condensing unit.
• Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain 33°F to 38°F (refrigerator) and -10°F (freezer) interior cabinet
temperature.
• Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
ELECTRICAL CHARACTERISTICS:
• Unit completely pre-wired at factory, and ready for final connection. A
cord and plug set to be included.
• A sole use circuit is required.
Project Name:
Location:
Item #: Qty:
Model #:
Dual Temperature Reach-In
Refrigerator/Freezer
❒ TA2DT-2S
115/208-230/1
NEMA 14-20
AIA #
SIS #
Remote cabinets available 14% off list
(condensing units supplied by others).
Consult factory technical service dept. for BTU information.
Printed in
U.S.A.
10/03
5
YEAR
COMPRESSOR
Exceptions:
R
E
G
N
Y
E
APPROVALS:
S
S
A
S
V
I
G
N
Curb mountable units for
TR/TA/TG series only. (5% list upcharge)
Specifications subject to change without notice.
®
TA-Series: Dual Temperature Reach-In Refrigerator/Freezer
12
9
/16"
5
1
35
-10
/16"
51
3
/8"
18
1
/16"
L - 131 cm
D - 89 cm
H - 199 cm
34
23
3
/4"
5
/8"
58
3
/8"
63
3
/8"
77"
83
Door
Swing - 61 cm
1
/4
5"
1
1
/4"
Rough-In Data
Capacity Dimensions Cord
Swing (Cu. Ft) (inches) HP NEMA Length Crated
Model Doors Ref. - Frzr L D† H* Ref. - Freezer Volts PH Amps Config. (feet) Weight
TA2DT-2S 2 26 24 51 3/8 34 3/4 78 1/4 1/3 1/2 115/208/230 1 12.2 14-20 9 725
Requires 115/208-230/60 Hz, single phase, 3 pole, 4 wire.
* Height does not include 5” for castors or 6” for optional legs.
† Depth does not include 1 5/16” for upper rear condensate enclosure.
Specifications subject to change without notice.
Standard Features ___________________________________________________________________________________________
• Two, independent, self-contained,
oversized and balanced, environmentally
friendly refrigeration systems
(refrigerator 134A; freezer R404A) left side refrigerator holds 33°F to 38°F;
right side freezer holds -10°F.
• Exterior - 300 series stainless steel exterior
front, sides, top, bottom and back (the
finest stainless available).
• Interior - NSF approved, white vinyl
coated aluminum sides. 300 series
stainless floor and door liner.
• 300 series stainless steel doors with
recessed handles (lifetime guaranteed).
• Door locks standard.
• Two exterior mounted digital electronic
thermometers with manual defogger.
• Single power cord for two compressors.
• Foamed-inplace polyurethane high
density cell insulation (CFC free).
• Standard backguard - improves airflow
in freezer compartment.
KCL
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Model Front Right Plan 3D
TA2DT-2S TFQY93E TFQY54S TFQY93P TFQY933
• (3) heavy duty, vinyl coated shelves per
section (shipped separately) (3) different
interior kits available. Kit selection must
be indicated at time of order.
(field installation required).
• Epoxy coated evaporator.
• Compartmentalized, Incandescent interior
lighting (one for each door).
• 4" diameter swivel castors standard
equipment - locking castors provided for
front set.
• Hot gas condensate for energy efficiency.
• Positive seal self-closing doors with factory
tested (over 1,000,000 times) lifetime
guaranteed door hinges and torsion type
closure system.
• Top mounted unit positioned out of food
zone to maximize storage capacity.
• Self-contained system.
• 1 year parts and labor warranty (USA).
• 5 year compressor warranty (USA).
TRUE FOOD SERVICE EQUIPMENT
Optional Accessories______________
❒ 6" stainless steel legs.
❒ Seismic/Flanged legs.
❒ Kit #1 (9 sets of #1 type tray slides).
❒ Kit #2 (rod type 1 set covers 1/2 section).
❒ Kit #3 (6 sets of universal type tray slides).
❒ Kit #4 (3 chrome shelves and shelf supports)
❒ Stainless steel (electro polished) shelves.
❒ Chrome shelves.
❒ Metal handle (solid doors only).
❒ Cam lift hinge (solid door models only).
❒ Electronic temperature control.
❒ Universal pan slides.
❒ #1 pan slides.
❒ #2 or rod style pan slides.
❒ Curb mountable units.
❒ Export units available - consult factory.
❒ Correctional facility options - consult factory.
❒ Remote cabinets available (contact factory
technical services for BTU information).
R
E
G
N
Y
YEAR
COMPRESSOR
5
E
S
S
A
S
V
I
G
N
Printed in U.S.A.
Loading...