True TA1HRT-1S-1S User Manual

TRUE FOOD SERVICE

EQUIPMENT, INC.

St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366

[phone] • FAX [phone] • [phone] • www.truemfg.com

Parts Dept. (800)424-TRUE • Parts Dept. FAX# [phone]

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

Model:

TA1HRT-1S-1S

TA Specication Series:

Roll-Thru Solid Door Heated Cabinet

TA1HRT-1S-1S

Provides cabinet holding
temperature of 80˚F to 180˚F
(26.67˚C to 82.22˚C).

Internal fan provides low velocity,
forced-air heat distribution
to assure even temperatures
throughout the cabinet.

(2) stainless steel 1000 watt nned
tube heating elements per section
for uniform generation of electric
heat. Cabinet comes with a total of
2000 watts.

300 series stainless steel exterior
front, sides, back, and bottom.
The very nest stainless; higher
tensile strength for fewer dents and
scratches.

Anodized aluminum interior
cabinet liner. 300 series stainless
steel door liner and oor with
coved corners.

(3) lifetime guaranteed, cam-lift
hinges per door. Full 180 degree
open capability with a stay open
feature at 120 degrees.

Designed to accept roll-in racks
(inboard castors) with a maximum
dimensions of 27"L x 29"D x 66"H
(686 mm x 737 mm x 1677 mm). (1)
heavy gauge stainless steel ramp
standard per door.

Entire cabinet structure and solid
doors are foamed-in-place using
high density, CFC free, polyurethane
insulation.

ROUGH-IN DATA

Capacity

Solid

Model

Doors

TA1HRT-1S-1S 2 37

(Cu. Ft.)

(liters)

1048

Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).

Cabinet Dimensions

(inches)

(mm)

L D H*

35

889

36 7/8

937

83 3/4

Watts Voltage Amps

2000 115/208-240/1 8.3 14-20P

2128

Specications subject to change without notice.

Crated

NEMA

Cong.



Cord Length

(total ft.)

(total m)

9

2.74

Weight

(lbs.)

(kg)

400

182

* Height does not include 1" (26 mm) for system mechanical components.  Plug type varies by country.
Requires 115/208 -240/60 Hz, single phase, 3 pole, 4 wire circuit.

N

E

S

A

V

3/04

R

E

G

Y

S

S

I

G

N

R

®

C

Printed in U.S.A.

APPROVALS:

US

Model:

TA1HRT-1S-1S

TA Specication Series:

Roll-Thru Solid Door Heated Cabinet

STANDARD FEATURES

DESIGN

True’s solid door roll-thru heated

•
cabinets are designed with enduring
quality that protects your long term
investment.

HEATER SYSTEM

Cabinet is designed to provide

•
holding temperatures of 80˚F to 180˚F
(26.67˚C to 82.22˚C). Heating system
controlled by exterior on/off switch
and temperature control dial.

•

(2) stainless steel, nned tube heating
elements (1000 watts each) per section
for uniform generation of electric
heat. Cabinet comes with a total of
2000 watts.

•

Cabinet equipped with low-velocity
fan to assure even temperature
distribution throughout the cabinet.
Fans are controllable by exterior on/
off switch.
Manually controlled vent located

•
on top of the cabinet for positive
humidity control.
Exterior dial thermometer; accurate

•
direct reading of internal cabinet
temperature.

CABINET CONSTRUCTION

Exterior - 300 series stainless steel

•
doors, front, back and bottom.
Stainless steel sides.
Interior- anodized aluminum liner. 300

•
series stainless steel oor with coved
corners.

•

Stainless steel breaker caps.

Insulation - entire cabinet structure

•
and solid door is foamed-in-place
using high density, CFC free,
polyurethane insulation.
(1) heavy gauge stainless steel ramp

•
standard per door.

Designed to accept roll-in racks

•
(inboard castors) with a maximum
dimensions of 27"L x 29"D x 66"H
(686 mm x 737 mm x 1677 mm).

DOORS

300 series stainless steel door liner.

•
Doors open within cabinet dimension.
Door locks standard.
(3) lifetime guaranteed, cam-lift

•
hinges per door. Full 180 degree open
capability with a stay open feature at
120 degrees.

•

Lifetime guaranteed recessed door
handles. Each door tted with 12"
(305 mm) long recessed handle that
is foamed-in-place with a sheet
metal interlock to insure permanent
attachment.
Magnetic door gaskets of one piece

•
construction, removable without tools
for ease of cleaning.
Door is eld reversible.

•

LIGHTING

•

Incandescent interior lighting; safety
shielded.

MODEL FEATURES

True heated cabinets are designed

•
to hold warm baked or cooked food.

Cabinets are not designed to heat
ambient or cold product.

ELECTRICAL

•

Unit completely pre-wired at factory
and ready for nal connection to a
115/208-240/60 Hz. Single phase - 20
amp dedicated outlet.
Cord and plug set included.

•

115/208-240/1
NEMA-14-20R

OPTIONAL FEATURES/ACCESSORIES

Metal door handle.



Export units - consult factory.



Prison package options - consult



factory.

Remote cabinets (condensing units



supplied by others), consult factory
technical service department for BTU
information.

PLAN VIEW

30"

(762 mm)

7

/

8"

96

(2461 mm)

3

83

/4"

(2128 mm)

3

/4

84

"

(2153 mm)

FRONT OF CABINET

35"

(889 mm)

TOP VIEW

Model Front Side Plan 3D

TA1HRT-1S-1S

WARRANTY

One year warranty on all parts

& labor (U.S.A. only)

FRONT VIEW

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

KCL

TRUE FOOD SERVICE EQUIPMENT

St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • FAX [phone] • [phone] • www.truemfg.com

7

36

/8"

(937 mm)

30"

(762 mm)

TFQY82E

TFQX61S

TFQX61P

TFQY843