True TA1HRI89-1S User Manual

TRUE FOOD SERVICE

T

RUE

R

EFRIGERAT ION

MADE IN

SINCE 1945

U.S.A.

®

EQUIPMENT, INC.

2001 East Terra Lane • O’Fallon, Missouri 63366
[phone] • Fax [phone] • [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

Model:

TA1HRI89-1S

TA Spec Series:

Roll-In Solid Swing Door 89" High Heated Cabinet

TA1HRI89-1S

Provides cabinet holding



temperature of 80°F to 180°F (26.6°C
to 82.2°C).

Equipped with low-velocity fans to



assure even temperature distribution
throughout the cabinet. Fans are
controlled by exterior on/o switch.

Two (2) stainless steel 1000 watt



nned tube heating elements per
section for uniform generation of
electric heat. Cabinet comes with a
total of 2000 watts.

300 series stainless steel exterior



front, back and bottom. The very
nest stainless with higher tensile
strength for fewer dents and
scratches.

Anodized aluminum interior cabinet



liner. 300 series stainless steel door
liner and oor with coved corners.

Three (3) lifetime guaranteed, cam-lift



hinges. Full 180° open capability with
a stay open feature at 120°.

Designed to accept roll-in racks



(inboard castors) with a maximum
dimension of 27"L x 29"D x 66"H (686
mm x 737 mm x 1677 mm). One (1)
heavy gauge stainless steel ramp
standard (per door).

Entire cabinet structure and solid



door are foamed-in-place using
Ecomate. A new, innovative, high
density, polyurethane insulation that
has zero ozone depletion potential
(ODP) and zero global warming
potential (GWP).

Rough-In Data

Model Doors

TA1HRI89-1S

1 35 34½ 88¾ 2000 115/208-230/60 14-20P 9 N/A

Chart dimensions rounded up to the nearest ⁄" (millimeters rounded up to next whole number).

Cabinet Dimensions

(inches)

(mm)

Watts Voltage

Specications subject to change without notice.

NEMA

Config.

Cord

Length
(total ft.)

(total m)

Crated

Weight

(lbs.)

(kg)L D† H*

889 877 2255 2.74 N/A

† Depth does not include 4 1/4" (7 mm) for ramp.
Height does not include 1" (26 mm) for system mechanical components.
Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.

ApprovAls: AvAilAble At:

9/11

Printed in U.S.A.

Model:

TA1HRI89-1S

TA Spec Series:

Roll-In Solid Swing Door 89" High Heated Cabinet

StanDaRD FeatuReS

DESIGN

True’s solid door roll-in heated cabinets

•

are designed with enduring quality that
protects your long term investment.

HEATER SYSTEM

Cabinet is designed to provide holding

•

temperatures of 80°F to 180°F (26.6°C to

82.2°C). Heating system controlled by
exterior on/o switch and temperature
control dial.
Two (2) stainless steel (for corrosion

•

resistance), nned tube heating elements
(1000 watts each) for uniform generation of
electric heat. Cabinet comes with a total of
2000 watts.
Equipped with low-velocity fans to assure

•

even temperature distribution throughout
the cabinet. Fans are controlled by exterior
on/o switch.
Manually controlled vent located on top of

•

the cabinet for positive humidity control.

CABINET CONSTRUCTION

Exterior - 300 series stainless steel door(s),

•

front, back and bottom. Stainless steel
sides.
Interior - NSF approved white aluminum

•

side walls and back liner. 300 series
stainless oor with coved corners.
Stainless steel breaker caps.

•

Insulation - entire cabinet structure and

•

solid door are foamed-in-place using
Ecomate. A new, innovative, high density,
polyurethane insulation that has zero
ozone depletion potential (ODP) and zero
global warming potential (GWP).
One (1) heavy gauge stainless steel ramp.

•

Designed to accept roll-in racks (inboard

•

castors) with a maximum dimension of
27"L x 29"D x 66"H (686 mm x 737 mm x
1677 mm).

DOOR

300 series stainless steel exterior and liners.

•

Doors open within cabinet dimension.
Door locks standard.

•

Lifetime guaranteed recessed door handle.

•

Door tted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to ensure
permanent attachment.
Three (3) lifetime guaranteed, cam-lift

•

hinges. Full 180°open capability with a stay
open feature at 120°.
Magnetic door gasket(s) of one piece

•

construction, removable without tools for
ease of cleaning.
Door is eld reversible.

•

LIGHTING

Incandescent interior lighting; lights

•

activated by exterior on/o switch, safety
shielded.

MODEL FEATURES

Exterior, color coded, temperature display;

•

accurate direct reading of internal cabinet
temperature.
Designed to hold warm baked or cooked

•

food. Cabinet is not designed to heat
ambient or cold product.
Interior bumpers protect cabinet walls from

•

abuse caused by roll-in carts.
12" x 20" (305 mm x 508 mm) pan for water

•

included, if additional humidity is required.
NSF-4 compliant for open food product.

•

ELECTRICAL

True requires that a sole use circuit be

•

dedicated for the unit.
Unit completely pre-wired at factory and

•

ready for nal connection to a 115/208­240/60 Hz. single phase, 20 amp dedicated
outlet. Cord and plug set included.

OPTIONAL FEATURES/ACCESSORIES

Upcharge and lead times may apply.

Metal door handle(s) (factory installed). ❑
Electronic temperature control (factory ❑
installed).
Correctional facilities options. ❑

Plan VIew

CUBIC FEET

* Based on ANSI/AHAM HRF-1-2004

One year warranty on all parts

and labor. (U.S.A. only)

37

WARRANTY

2001 East Terra Lane • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

TRUE FOOD SERVICE EQUIPMENT

KCL

Model Elevation Right Plan 3D Back

TA1HRI89-1S

TFQY83E TFQY83S TFQY51P TFQY833