True TA1H-1S User Manual

TRUE FOOD SERVICE

EQUIPMENT, INC.

St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366

[phone] • FAX [phone] • [phone] • www.truemfg.com

Parts Dept. (800)424-TRUE • Parts Dept. FAX# [phone]

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

Model:

TA1H-1S

TA Specication Series:

Reach-In Solid Door Heated Cabinet

TA1H-1S

Provides cabinet holding
temperature of 80˚F to 180˚F
(26.67˚C to 82.22˚C).

Internal fan provides low velocity,
forced-air heat distribution
to assure even temperatures
throughout the cabinet.

(2) stainless steel 1000 watt nned
tube heating elements per section
for uniform generation of electric
heat. Cabinet comes with a total of
2000 watts.

300 series stainless steel exterior
front, back, and bottom. The very
nest stainless; higher tensile
strength for fewer dents and
scratches.

Anodized aluminum interior
cabinet liner. 300 series stainless
steel door liner and oor with
coved corners.

Three (3) adjustable, heavy duty
chrome plated wire shelves 25"L
x 27 3/4"D (635 mm x 705 mm)
with 1" (26 mm) standoff. Four
(4) chrome plated shelf clips to be
included per shelf.

Entire cabinet structure and solid
doors are foamed-in-place using
high density, CFC free, polyurethane
insulation.

Positive seal self-closing doors with
120 degrees stay open feature.
Lifetime guaranteed door hinges
and recessed door handles.

ROUGH-IN DATA

Capacity

Solid

Model

Doors

TA1H-1S 1 31

(Cu. Ft.)

(liters)

878

Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).

Cabinet Dimensions

(inches)

(mm)

L D H*

29

737

34 5/8

880

78 1/4

Watts Voltage Amps

2000 115/208-240/1 8.3 14-20P

1988

Specications subject to change without notice.

Crated

NEMA

Cong.



Cord Length

(total ft.)

(total m)

9

2.74

Weight

(lbs.)

(kg)

350

159

* Height does not include 6" (153 mm) for legs and 1" (26 mm) for system mechanical components.  Plug type varies by country.
Requires 115/208 -240/60 Hz, single phase, 3 pole, 4 wire circuit.

N

E

S

A

V

3/04

R

E

G

Y

S

S

I

G

N

R

®

C

Printed in U.S.A.

APPROVALS:

US

Model:

TA1H-1S

TA Specication Series:

Reach-In Solid Door Heated Cabinet

STANDARD FEATURES

DESIGN

• True’s solid door reach-in heated cabinets
are designed with enduring quality that
protects your long term investment.

HEATER SYSTEM

• Cabinet is designed to provide holding
temperatures of 80˚F to 180˚F
(27˚C to 83˚C). Heating system controlled
by exterior on/off switch and temperature
control dial.

• Two stainless steel, nned tube heating
elements (1000 watts each) per section
for uniform generation of electric heat.
Cabinet comes with a total of 2000 watts.

• Cabinet equipped with low-velocity fan
to assure even temperature distribution
throughout the cabinet. Fans are
controllable by exterior on/off switch.

• Manually controlled vent located on top of
the cabinet for positive humidity control.

• Exterior dial thermometer; accurate direct
reading of internal cabinet temperature.

CABINET CONSTRUCTION

• Exterior - 300 series stainless steel door,
front, sides, back and bottom.

• Interior- anodized aluminum liner. 300
series stainless oor with coved corners.

• Stainless steel breaker cap.

• Insulation - entire cabinet structure and
solid door are foamed-in-place using high
density, CFC free, polyurethane insulation.

• Cabinet mounted on a welded, heavy
duty galvanized frame rail. Rail dipped in
rust inhibiting enamel paint for corrosion
protection inside and out.

• Frame rail tted with 6" (153 mm)
adjustable legs.

DOORS

• 300 series stainless steel exterior and door
liner. Door opens within cabinet dimension.

Door lock standard.

• Lifetime guaranteed recessed door handle.
Door tted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to insure
permanent attachment.

• Magnetic door gasket of one piece
construction, removable without tools for
ease of cleaning.

SHELVING

• Three (3) adjustable, heavy duty chrome
plated wire shelves 25"L x 27 3/4"D
(635 mm x 705 mm) with 1" (26 mm)
standoff. Four (4) chrome plated shelf clips
to be included per shelf.

• Additional tray slide options available.

• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on 1/2" (13 mm) increments.

LIGHTING

• Incandescent interior lighting; safety
shielded.

MODEL FEATURES

• True heated cabinets are designed to hold
warm baked or cooked food. Cabinets
are not designed to heat ambient or cold
product.

ELECTRICAL

• Unit completely pre-wired at factory
and ready for nal connection to a
115/208-240/60 Hz. Single phase - 20 amp
dedicated outlet.

• Cord and plug set included.

115/208-240/1
NEMA-14-20R

OPTIONAL FEATURES/ACCESSORIES

 4" (102 mm) diameter swivel castors.
 Seismic/anged legs.
 Stainless steel (electro polished) shelves.
 All stainless steel legs.
 Chrome shelves.
 Universal pan slides.
 #1 pan slides.
 #2 rod style pan slides.
 Curb mountable units.
 Export units - consult factory.
 Prison package options - consult factory.
 Metal door handle.
 Remote cabinets (condensing units

supplied by others), consult factory
technical service department for BTU
information.

KIT OPTIONS

 Kit #1: Nine sets of #1 type tray slides,

bottom support of one 18" x 26"
(456 mm x 661 mm) pan or
two 14" x 18" (356 mm x 456 mm) pans.

 Kit #2: One set half-section #2 steel rod tray

slides, rim support of one
18" x 26" (456 mm x 661 mm) pan.

 Kit #3: Six sets of universal type tray slides,

bottom support of one 18"x 26"
(456 mm x 661 mm) pan, two 14"x18"
(356 mm x 456 mm) pans or two
12" x 20" (305 mm x 508 mm) pans.

 Kit #4: Three chrome shelves

25"x 27 3/4" with 1" (26 mm) standoff (635
mm x 705 mm) and chrome plated shelf
supports.

PLAN VIEW

29"

(737 mm)

78"

(1982 mm)

853/16"

(2164 mm)

WARRANTY

One year warranty on all parts

& labor (U.S.A. only)

FRONT VIEW

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

6"

(153 mm)

KCL

TOP VIEW

Model Front Side Plan 3D

TA1H-1S TFQY79E TFQX72S TFQX60P TFQY793

TRUE FOOD SERVICE EQUIPMENT

St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • FAX [phone] • [phone] • www.truemfg.com

345/8"

(880 mm)

2623/32"

(679 mm)

6111/32"

(1559 mm)