
LEADERS IN MARINE C OMPOSITE FI TTINGS
www.trudesignplastics.com
Position Monitored Ball Valves
TRUDESIGN
TRUDESIGN
TRUDESIGN
Features:
Page 1 of 8

LEADERS IN MARINE C OMPOSITE FI TTINGS
www.trudesignplastics.com
Ball Valve Position Monitored ½” BSP
Ball Valve Position Monitored ½” NPS
Ball Valve Position Monitored ¾” BSP
Ball Valve Position Monitored ¾” NPS
Ball Valve Position Monitored 1” BSP
Ball Valve Position Monitored 1” NPS
Ball Valve Position Monitored 1¼” BSP
Ball Valve Position Monitored 1¼” NPS
Ball Valve Position Monitored 1½” BSP
Ball Valve Position Monitored 1½” NPS
Ball Valve Position Monitored 2” BSP
Ball Valve Position Monitored 2” NPS
90412 Panel Display Ball Valve
Large handle for
easy operation
Size and thread
form is marked on
each end of the
product
Able to be locked
for compliance with
toilet waste outlet
standards
Valve position is
marked for easy
identification
Brightly coloured
handle allows easy
viewing of position
Spanner is
available for easy
and damage free
installation
Features Continued
Models
Ball Valves are supplied with spanner and installation instructions
Weight
Page 2 of 8

LEADERS IN MARINE C OMPOSITE FI TTINGS
www.trudesignplastics.com
BLUE = Valve closed signal
RED = Supply (10-32V)
GREEN = Valve open signal
Display Panel
o
o
o
o
Page 3 of 8

LEADERS IN MARINE C OMPOSITE FI TTINGS
www.trudesignplastics.com
Installation & Thread Sealing
TRUDESIGN
TRUDESIGN
Page 4 of 8

LEADERS IN MARINE C OMPOSITE FI TTINGS
www.trudesignplastics.com
Spanner Ball Valve ¾” & 1”
Spanner Ball Valve 1¼” & 1½”
Replacement T handle Small – 25mm,19mm,13mm (1”, ¾”, ½”)
Spanner Ball Valve ¾” & 1” – 50mm, 38mm, 32mm (2”, 1½”, 1¼”)
Ball Valve Spanner
REPLACEMENT t HANDLE
Page 5 of 8

LEADERS IN MARINE C OMPOSITE FI TTINGS
www.trudesignplastics.com
Dimensions
All dimensions nominal.
19mm [¾”] ID ½” BSP, ¾” BSP, 1” BSP
½” NPS, ¾” NPS, 1” NPS
Page 6 of 8

LEADERS IN MARINE C OMPOSITE FI TTINGS
www.trudesignplastics.com
32mm [1¼”] ID 1¼” BSP, 1½” BSP
1¼” NPS, 1½” NPS
Page 7 of 8

LEADERS IN MARINE C OMPOSITE FI TTINGS
www.trudesignplastics.com
The information contained in this information sheet is for general information purposes only. The information is provided by
TruDesign™ and while we endeavour to keep the information up to date and correct, we make no representations or warranties of
any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability. Any reliance you place on such
information is therefore strictly at your own risk.
52mm [2”] ID 2” BSP
2” NPS
Page 8 of 8