TRSYS P6SMBJ10, P6SMBJ100CA, P6SMBJ10C, P6SMBJ110C, P6SMBJ110 Datasheet

...
P6SMBJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 5.0 TO 170 Volts Peak Power Pulse - 600Watt
FEATURES
l Low profile package l Built-in strain relief l Glass passivated junction l Low inductance l Excellent clamping capability l Repetition Rate(duty cycle):0.01% l Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types
l Typical ID less than 1A above 10V l High temperature soldering :
260/10 seconds at terminals l Plastic package has Underwriters Laboratory Flammability Classification 94V-O
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end(cathode) except Bidirectional Standard packaging:12 mm tape per(EIA 481) Weight: 0.003 ounce, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25ambient temperature unless otherwise specified.
SYMBOL VALUE UNITS
Peak Pulse Power Dissipation on 10/1000s waveform (Note 1,2,Fig 1)
P
PPM
Minimum 600 Watts
Peak Pulse Current on 10/1000s waveform (Note 1,Fig 3)
I
PPM
See Table 1 Amps
Peak forward Surge Current 8.3ms single half sine-wave superimposed on rated load(JEDEC Method) (Note 2,3)
I
FSM
100.0 Amps
Operating Junction and Storage Temperature Range TJ,T
STG
-55 to +150
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25per Fig. 2.
SMB/DO-214AA
2.Mounted on 5.0mm2 (.013mm thick) land areas.
3.Measured on 8 .3ms, single half sine-wave or equivalent square wave, duty cycle= 4 pulses per minutes maximum.
MAXIMUM RATINGS AND CHARACTERISTIC CURVES P6SMBJ SERIES
Fig. 1-PEAK PULSE POWER RATING VERSUS Fig. 2-PULSE RATING CURVE
Fig. 3-PULSE WAVEFORM Fig. 4-TYPICAL JUNCTION CAPACITANCE
Fig. 5- MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
Loading...
+ 3 hidden pages