TRSYS FR3A, FR3A, FR3K, FR3K, FR3G Datasheet
...
FR3A THRU FR3K
FAST SWITCHING SURFACE MOUNT RECTIFIER
VOLTAGE - 50 to 800 Volts CURRENT - 3.0 Amperes
FEATURES
l For surface mounted applications
l Low profile package
l Built-in strain relief
l Easy pick and place
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l Glass passivated junction
l High temperature soldering:
260/10 seconds at terminals
l Fast recovery times for high efficiency
MECHANICAL DATA
Case: JEDEC DO-214AB molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
SMC/DO-214AB
Standard packaging: 16mm tape (EIA-481)
Weight: 0.007 ounce, 0.21 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage V
Maximum RMS Voltage V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800
Maximum Average Forward Rectified Current,
at TL=75
Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A VF 1.3 Volts
Maximum DC Reverse Current TA=25
At Rated DC Blocking Voltage TA=125
SYMBOLS FR3A FR3B FR3D FR3G FR3J FR3K UNITS
50 100 200 400 600 800
RRM
35 70 140 280 420 560
RMS
I
3.0 Amps
(AV)
I
100 Amps
FSM
IR 10.0
300
Volts
Volts
Volts
A
Maximum Reverse Recovery Time (Note 1) TRR 150 250 500 S
Typical Junction capacitance (Note 2) CJ 60.0
Maximum Thermal Resistance (Note 3) RJL
RJA
Operating and Storage Temperature Range TJ,T
STG
-50 to +150
15
50
F
P
/W
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and Applied reverse voltage of 4.0 volts
3. 8.0mm2 (.013mm thick) land areas
RATING AND CHARACTERISTIC CURVES
FR3A THRU FR3K
Fig. 1-FORWARD CURRENT DERATING CURVE Fig. 2-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
Fig. 3-MAXIMUM NON-REPETITIVE SURGE
Fig. 4-TYPICAL REVERSE CHARACTERISTICS
CURRENT
Loading...