TRSYS ER303D, ER303D, ER302D, ER302D Datasheet
FEATURES
ER302D THRU ER303D
DPAK SURFACE MOUNT SUPERFAST RECTIFIER
VOLTAGE - 200 to 300 Volts CURRENT - 3.0 Amperes
l For surface mounted applications
l Low profile package
l Built-in strain relief
l Easy pick and place
l Superfast recovery times for high efficiency
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l Glass passivated junction
l High temperature soldering:
260/10 seconds at terminals
MECHANICAL DATA
Case: D PAK/TO-252AA molded plastic
Terminals: Solder plated, solderable per MIL-STD750,
Method 2026
Polarity: Color bank denotes cathode
D PAK/TO-252AA
Standard packaging: 16mm tape (EIA-481)
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Resistive or inductive load.
Maximum Recurrent Peak Reverse Voltage V
Maximum RMS Voltage V
SYMBOLS
RRM
RMS
Maximum DC Blocking Voltage VDC
Maximum Average Forward Rectified Current,
at TC=75
Peak Forward Surge Current 8.3ms single half sineWave superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A
(Note 1)
Maximum DC Reverse Current TA=25
I
3.0 Amps
(AV)
I
75.0 Amps
FSM
VF 0.95 1.25 Volts
IR 5.0
At Rated DC Blocking Voltage TA=100
Maximum Thermal Resistance (Note 2) RJC
RJA
ER302D ER303D UNITS
200 300 Volts
140 210 Volts
200 300 Volts
A
0.2
6.0
mA
/W
80.0
Maximum Reverse Recovery TRR 35.0 nS
Storage Temperature Range T
-50 to +150
STG
NOTES:
1. Pulse Test with PW=300sec, 2% Duty Cycle.
2. Mounted on P.C.Board with 14mm2 (.013mm thick) copper pad areas.
RATING AND CHARACTERISTIC CURVES
ER302D THRU ER303D
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC Fig. 2-MAXIMUM AVERAGE FORWARD
AND TEST CIRCUIT DIAGRAM CURRENT RATING
Fig. 3-TYPICAL REVERSE CHARACTERISTICS Fig. 4-TYPICAL FORWARD CAPACITANCE
Fig. 5-MAXIMUM NON-REPETITIVE SURGE CURRENT Fig. 6-TYPICAL JUNCTION CAPACITANCE
Loading...