(For use with Hewlett-Packard LaserJet 4014, 4015, and 4515 Series Printers)
Document #50-70407-003 Rev. A
Font Card Kit User’s Guide
Acknowledgements
Some of the TROY products include cryptographic software written by Eric Young (eay@cryptsoft.com)
The Twofish encryption/decryption source code used in the TROY Font Card is provided by Crytopane.
TROY is a registered trademark. TROYmark™ and AutoProtect™ are registered trademarks of TROY Group, Inc. All rights reserved.
Microsoft Windows, PostScript, TrueType, LaserJet, and all other product names mentioned in this publication are trademarks or registered trademarks
of their respective companies.
Information and descriptions contained herein are the property of TROY Group, Inc. Such information and descriptions may not be copied,
disseminated, or distributed without the express written consent of TROY Group, Inc. This publication is subject to change without notice.
This manual is designed and formatted for use as an online document (viewed on your computer screen). For
best results, use Adobe Acrobat Reader 7.0 or higher to view or print this document. Using earlier versions of
Adobe Acrobat Reader to view or print this document may not produce a properly formatted document on your
computer screen. The latest version of Adobe Acrobat Reader is available as a free download from the Adobe
website at http://www.adobe.com.
This User’s Guide uses these conventions:
Bold indicates emphasis or a minor heading.
Italic refers to a document title or is used for emphasis.
COURIER type indicates text visible on a computer screen or keys on your computer keyboard.
The letter λ is used in examples to distinguish the small letter l from the numeral 1 (one).
The character Ø is used in examples to distinguish the letter O from the numeral 0 (zero).
<Esc>, <CR>, <LF>, <FF>, etc. are control characters. Use a text editor to enter the equivalent of the character.
For example, to get <Esc> using a DOS text editor, hold down the Ctrl key; and press the [ (left square bracket)
key. Other text editors may vary.
NOTE: Notes contain important information set off from the text.
CAUTION: Caution messages appear before procedures, which, if not observed,
could result in loss of data or in damage to equipment.
WARNING: Warning messages alert you to a specific procedure or practice,
which, if not followed correctly, could cause serious personal injury.
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A TOC-1
Uninstall the TROY Screen Fonts ..............................................................................................4-9
Uninstall the TROY Support Files..............................................................................................4-9
Uninstall the TROY Printer Utility ..........................................................................................4-10
Appendix – TROY Font Card Installation
Installing the TROY Font Card ........................................................................................................A-1
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A TOC-4
Section 1 Features Overview
Introduction
Thank you for purchasing your TROY Font Card Kit. You have chosen the highest quality MICR (Magnetic Ink
Character Recognition) printing solution available today that offers convenience, flexibility, and precision for
printing high-quality MICR documents.
The TROY Font Card Kit includes the TROY Font Card and a specially formulated TROY MICR toner cartridge
designed to meet or exceed all ANSI MICR printing standards. The TROY Font Card features an enhanced
collection of MICR, OCR, and security fonts designed for printing financial documents. The TROY Font Card
can be installed in a standard HP 4014, 4015, or 4515 LaserJet printer to provide MICR printing capabilities.
Each TROY Font Card is designed for a specific HP printer and is not interchangeable between printer models.
Refer to the TROY Font Card Kit Quick-Start Guide for information on installing the necessary TROY support
files. Refer to the Appendix in this manual for installing the TROY Font Card into a compatible HP printer.
TROY Security
Fonts
Your TROY Font Card Kit includes a collection of high-quality MICR fonts (E13-B, CMC-7) and other security
fonts programmed into the TROY Font Card. See Section 3 – Using TROY Fonts for more information. The
TROY Security font collection includes the following fonts:
TROY Font Description
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 1-1
E13-B MICR Font
CMC-7 MICR Font
Enhanced Convenience Font
Large Convenience Font
Small Convenience Font
TROY Reverse Helvetica Font
British Pound and Euro Currency
Symbols
TROY Barcode and POSTNET Fonts
TROY Security Font
TROY OCR Font (type A and B)
International Convenience Fonts
Used to print the MICR line at the bottom of the check (United States and selected countries)
Used to print the MICR line at the bottom of the check (if your bank of deposit requires this font)
Used to print the convenience amount information on the check (this font is scalable)
Used to print the convenience amount information on the check (this font is non-scalable)
Used to print the convenience amount information on the check (this font is non-scalable)
Used to print names and addresses on the back of transparent envelope windows for use in
pressure-seal machines
Used as the British or European currency symbol for the respective country (replaces the U.S.
dollar sign). These symbols can be selected to print in the audit reports. The decimal point or
comma (default) can be selected.
Used to print several types of industry-standard barcodes for a variety of uses, and also
includes a POSTNET font for printing the U.S. postal bar code that represents the 9-digit zip
code printed below the postal address
Used to print the amount information on the check (English / Spanish) (this font is scalable)
Used to print any information (names, addresses, amounts) that is to be read by automated
readers using optical character recognition (this font is scalable)
Used to print the convenience amount on the check in any one of five languages (available on
the TROY Security Printing Solutions CD supplied with your TROY Font DIMM Kit)
A
Section 2 Using the TROY Printer Utility
Introduction
Menu
Structure
The TROY Printer Utility is an easy-to-use Microsoft Windows-based utility designed to assist you with the
management of a TROY Font Card. The TROY Printer Utility allows the system administrator to perform the
following functions:
• View system information
• Print Windows Security and Barcode demonstration pages
• Print PCL Security/Barcode Font demonstration page
• Obtain technical assistance
• Access the TROY Web site for printer firmware updates, drivers, and product/supplies information.
The TROY Printer Utility is included on the TROY Font Card Kit CD supplied with your TROY Font Card Kit.
Follow the instructions in the TROY Font Card Kit Quick-Start Guide to install the TROY Printer Utility.
The user-friendly features of the TROY Printer Utility are conveniently grouped under three pull-down menus as
shown below. An arrow () next to the menu selection indicates that additional selections are available for that
menu item. It is suggested that you print out this page for use as a convenient reference when using the TROY
Printer Utility.
TROY Printer Utility Menu Tree
FILERESOURCESHELP
Print
Windows Security Font Demo
Windows Barcode Font Demo
PCL Security/Barcode Font Demo
Download File
Install New Resources
Fonts
Macros/Forms
TROY Printer Utility Help F1
TROY on the Web
Technical Support
System Information
Firmware Update
Exit
NOTE
: The grayed-out menu items displayed in the TROY Printer Utility menus are for features that apply only to
TROY printers and Hewlett-Packard printers that have the TROY MICR Secure DIMM installed.
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 2-1
bout
Section 2 Using the TROY Printer Utility
Basic Printer
Utility
Operations
TO ACCESS THE TROYPRINTER UTILITY:
1.Click on the Microsoft Windows Start button, select Programs, MICR by TROY, and then click on the
TROY Printer Utility icon. The Printer Utility main window will appear.
2. Click on the Hewlett-Packard printer you wish to manage.
TROY Printer U tility
File Resource s HelpSetti ngs
Select the printer to configure from the following list:
HP 4515 PCL 5e LaserJet Printer USB Virtual Printer Port
Selected Pri nter In formation
Admin Passw ord
TROY Se curit y Printing Solutio n
MICR Font CardWinspool
Selected printer location (port):
Windows Printer Driver
3. Select MICR Font Card from the TROY Security Printing Solution drop-down menu. For convenience, this
setting is saved when you exit the TROY Printer Utility. This option simplifies the TROY Printer Utility
interface by allowing access to features that are only available within your product type.
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 2-2
Section 2 Using the TROY Printer Utility
Printing
Demo Pages
Accessing Fonts
Using NonWindows
Applications
Verifying
Windows Font
Support
The TROY Printer Utility provides the ability to generate a Windows Security Font, Windows Barcode Font, and
PCL Security/Barcode Font demonstration page. Use the Windows Security Font demonstration page if you are
using a Windows-based printing application, or use the PCL Security/Barcode Font demonstration page if you
are using a non-Windows-based printing application. Use these demonstration pages to verify the TROY
Security fonts generated by your printer.
If you are using a non-Windows application to print MICR documents, the escape sequence for each font must be
programmed into the application in order to “call” each of the selected fonts. The <Esc> character is ASCII
character number 27 (hexadecimal number 1B). Refer to Section 3 – Using TROY Fonts for the specific escape
sequence (displayed above each character map) used to call each of the TROY fonts.
To verify that the TROY Windows font support files were properly installed on your system, demonstration
documents are provided through the TROY Printer Utility in Windows that can be printed out to visually identify
all security and/or barcode fonts downloaded to the TROY printer. Make sure your TROY printer is properly
setup, powered ON, and is online before printing the Windows Security Font or Windows Barcode Font
Demonstration page(s).
TO PRINT THE WINDOWS SECURITY (MICR)FONT DEMONSTRATION PAGE:
1. From the Main Window, click on the printer you wish to manage.
2. From the Main Window, click on File, Print, and then click on Windows Security (MICR) Font Demo. The
printer will automatically print the Windows Security Font Demonstration page (see example on next page).
3. Compare the actual TROY security fonts (the actual fonts generated by your printing system) shown in the
right-hand column with the facsimile image of these fonts printed in the center column (a digitized image
designed to look exactly like the actual fonts generated by your system – see example on the next page).
If the support files were properly installed, the actual TROY security and/or barcode fonts displayed in the
right-hand column should appear identical to the facsimile fonts displayed in the center column. If the actual
fonts do not match the facsimile fonts printed on the demonstration document (fonts not printed correctly or
fonts missing on the printout), review the installation steps in this document. If further assistance is required,
contact TROY Technical Support.
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 2-3
Section 2 Using the TROY Printer Utility
Verifying
Windows Font
Support (cont.)
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 2-4
Section 2 Using the TROY Printer Utility
Verifying PCL 5e
Communication
The PCL Security/Barcode Font demonstration page can be used to verify PCL 5e communication between the
host computer and your printer. If the PCL 5 communication between the host computer and your printer is
successful, then the selected demonstration page should print out exactly as shown in the example below.
TO PRINT THE PCLSECURITY/BARCODE FONT DEMONSTRATION PAGE:
1. From the Main Window, click on the printer you wish to access.
2. Type in the current administrator password in the password box at the bottom of the Main Window. If a
password is not set, then leave the password box blank.
3. From the Main Window, click on File, Print, and then click on PCL Security/Barcode Font Demo. The
printer will automatically print the PCL 5e Security/Barcode Font Demonstration pages (see example below).
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 2-5
Section 2 Using the TROY Printer Utility
Downloading
Files to the
Printer
The TROY Printer Utility provides the ability to download any PCL or text file directly to the printer without
embedding additional information. A download option is provided to enhance the download file (see the
Download File window for the specific option). To include the advanced option to the download, place a
checkmark next to the option. The advanced download option is provided for advanced users only.
TO DOWNLOAD A FILE TO THE PRINTER:
1. From the Main Window, click on the printer you
wish to manage.
Download File
File Help
2.From the Main Window, click on File, and click on
Download File.
3. Enter the file name or click on Browse to locate the
desired file.
4. For advanced users: Place a checkmark next to the
download option if you wish to include the additional
data with the download file. For normal use, it is recommended that the checkbox be left blank.
5. Click on Download to send the file to the printer’s
memory. Click on OK to finish.
6. Click on OK to continue.
File Name:
Include Administrator and Password data to file
Include NVRAM download enter and exit data to file
Include job initialize and job exit data to file
Download
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 2-6
Section 2 Using the TROY Printer Utility
Downloading
Files to the
Printer (cont.)
The multiple download feature allows you to specify the number of times to download a single file to the printer
without having to repetitively initiate the download process and respond to confirmation prompts. The multiple
download feature is useful for testing purposes. To include the advanced option to the download, place a
checkmark next to the option. The advanced download option is provided for advanced users only.
TO REPEATEDLY DOWNLOAD OF A FILE TO THE PRINTER:
1. From the Main Window, click on the printer you wish
to manage.
2. Type in the current administrator password in the
password box at the bottom of the Main Window. If a
password is not set, then leave the password box blank.
3. From the Main Window, click on File, and click on
Multiple Download.
4. Enter the file name or click on Browse to locate the
desired file.
5. For advanced users: Place a checkmark next to the
download option if you wish to include the additional
data with the download file. For normal use, it is recommended that the checkbox be left blank.
6. Enter the number of times to download the file (the default is 5), and then click on Download to send the file
to the printer’s flash-file memory multiple times. Multiple downloads can be specified from 0 to 5000. Click
on OK to finish.
7. Click on OK to continue.
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 2-7
Section 2 Using the TROY Printer Utility
Obtaining
Technical
Assistance
The TROY Printer Utility provides several help screens to guide you through the features and functions of your
TROY Font Card. TROY technical support is available to assist you with any questions concerning the setup,
operation, and maintenance of your TROY Font Card. Specific system information about the configuration of
your TROY product is also available through the TROY Printer Utility. You are also encouraged to visit the
TROY web site for latest FAQs (Frequently Asked Questions), information on the latest TROY products, and for
ordering MICR toner and other printing supplies.
TO VIEW TECHNICAL SUPPORT INFORMATION:
From the Main Window, click on Help, and then click on Technical Support to view the TROY Technical
Support HTML page for telephone numbers and hours of business.
TO VIEW INFORMATION ON THE TROY WEB SITE:
From the Main Window, click on Help, and then click on TROY on the Web to access the TROY web site. Click
on the Services and Support button at the top of the web page to view the available topics. You can access the
TROY web site directly at http://www.troygroup.com.
TO VIEW ON-SCREEN HELP FOR THE TROY PRINTER UTILITY:
From the Main Window, click on Help, and then click on TROY Printer Utility Help F1 to view the Printer
Utility help documents. You can press the F1 key at any time while using the TROY Printer Utility to access the
help screens.
TO VIEW INFORMATION ABOUT THE PRINTER UTILITY:
From the Main Window, click on Help, and then click on About to view the version level and other information
about the TROY Printer Utility.
TO VIEW SYSTEM INFORMATION:
From the Main Window, click on Help, and then click on System Information to view the version level and other
information about your computer and printer's hardware and software environment.
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 2-8
Section 3 Using TROY Fonts
Introduction
Accessing
and Using
TROY Fonts
Accessing TROY
Fonts Using
Windows
Applications
Accessing TROY
Fonts Using NonWindows
Applications
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 3-1
The TROY MICR E-13B and CMC-7 MICR fonts have been specifically engineered for your TROY Security
Printing Solution to ensure the highest quality MICR printing in the industry. The TROY font collection
provides seamless integration and security within your Windows-based check printing application. All TROY
fonts are permanently programmed into the TROY Font Card to ensure consistent high-quality MICR printing
and to prevent unauthorized use of these fonts on another printing system. Your TROY Security Printing
Solution includes the following fonts:
• TROY MICR Font (E-13B and CMC-7)
• TROY Security Font (English and Spanish)
• TROY Convenience Fonts (Enhanced, Large and Small)
• TROY Reverse Helvetica Font
• TROY OCR Fonts (type A and B)
• British Pound and Euro symbols
• TROY POSTNET and Barcode Fonts (not available for TROY 2300 Font DIMM Kits)
The following paragraphs provide some basic information for accessing and using the TROY fonts. It is
important that these fonts are kept secure to prevent unauthorized use and that the fonts remain unaltered to
ensure accurate rendering by your printer. All TROY fonts are permanently programmed into the TROY Font
Card and cannot be directly accessed through external means.
To access the TROY fonts in a Windows environment, you must first install the Windows printer driver for your
HP 4014, 4015, or 4515 LaserJet printer. Follow the instructions in TROY Font Card Kit Quick-Start Guide to
install the printer driver and Windows support files, enabling you to select these fonts from any Windows-based
application. To print the TROY E13-B and CMC-7 MICR fonts, your printer must be set to MICR enabled
mode, and a TROY MICR toner cartridge must be installed in the printer. Many commercial MICR checkprinting applications are pre-programmed to access the TROY MICR fonts.
If you are using a non-Windows application to print MICR documents, the escape sequence for each font must be
programmed into your check-printing application in order to “call” each of the selected fonts. The <Esc>
character is ASCII character number 27 (hexadecimal number 1B). Refer to the end of this section for each
escape sequence (displayed above each character map) used to call each TROY font.
Section 3 Using TROY Fonts
Using the TROY
E-13B MICR
Font
Using the TROY
CMC-7 MICR
Font
Using the
Convenience
Amount Fonts
Using the TROY
Security Font
Using the TROY
OCR Fonts
Using the Reverse
Helvetica Font
Using the TROY
POSTNET Font
Using the British
Pound and Euro
Symbols
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 3-2
The E-13B MICR font (TROY E-13B) can be used for printing the MICR line in many countries, including the
United States. In some European and Latin American countries, the CMC-7 MICR font is used instead. TROY
can provide customer support for your MICR applications only if you use the supplied TROY MICR fonts.
The CMC-7 MICR font (TROY CMC-7) can be used for printing the MICR line in many countries, including
some European and Latin American countries. TROY can provide customer support for your MICR applications
only if you use the supplied TROY MICR fonts.
Your TROY Security Printing Solution includes a large, small and enhanced convenience amount font (TROY
ECF,TROY LCF,TROY SCF). These fonts consist of numbers with their alphabetic spellings placed directly
below the numerical character. These fonts are designed for use in the Legal Amount field only (located directly
below the Payee field). You can enter alphanumeric symbols representing the amount of the check into this field.
The TROY Security font (TROY SECURITY,TROY SECURITY SPANISH) is designed to prevent fraudulent alteration
to the Amount field on the check. The font consists of numbers with their alphabetic spellings placed directly
below the numerical character with a wavy lined pattern running through each character. These fonts are
designed for use in the Legal Amount field only (located directly below the Payee field on the check). You can
enter numeric symbols representing the amount of the check into this field. During document processing,
convenience amounts may be visually read and encoded on the check by bank personnel. In this case, a large
Convenience Amount font may best meet your bank’s requirements.
The TROY OCR fonts (TROY OCR-A AND TROY OCR-B) are used to print any information (names, addresses,
amounts) on the check that is to be read by automated readers using optical character recognition.
The TROY Reverse Helvetica font is used to print names and addresses on the back of transparent envelope
windows for use in pressure-seal machines.
The POSTNET (Postal Numeric Encoding Technique) font (TROY POSTNET) is used to represent the nine-digit
postal zip code below the postal address line. Using the POSTNET font on your mailing envelopes and postcards
will significantly decrease postal processing time and reduce the chance of errors when manual data entry is
required at the post office.
The British Pound and European currency symbols are used in place of the U.S. dollar sign for the respective
European country and can be selected to print in the audit reports. A decimal point or comma can be selected for
use with these currency symbols.
Section 3 Using TROY Fonts
Using Printer
Fonts and
Screen Fonts
In addition to the TROY printer
fonts that are permanently
programmed into the TROY Font
Card, the TROY screen fonts have
been developed for screen display
use only as a visual reference and
for making positional adjustments to
the MICR line. The TROY screen
fonts display differently than the
actual printer fonts in order to
prevent unauthorized printing using
the MICR screen fonts on other
Windows-installed printers.
If the E-13B MICR screen font is
used for printing, the inversely
printed (white characters on a black
background) MICR screen font will
not be readable by the bank
reader/sorter machines. The
uniquely displayed screen fonts
ensure that the MICR font printed
on your MICR documents is
generated by the TROY Font Card
and not by the Windows operating
system using the resident
TrueType™ font. The TROY screen
fonts are provided on the TROY Font Card Kit CD supplied with
your TROY product.
Font Card Kit User’s Guide -- Document #50-70407-003 Rev. A 3-3
Loading...
+ 40 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.